The viewpoint a policy acts from
A head-mounted camera keeps both hands and the form in frame from the viewpoint a manipulation policy acts from. Sculpting happens at arm length, so the view that matters is the one at the sculptor head.
Now recruiting capture teams worldwide. Get paid to record first-person video of real work.
Apply to captureTask family
Why first-person capture here
A head-mounted camera keeps both hands and the form in frame from the viewpoint a manipulation policy acts from. Sculpting happens at arm length, so the view that matters is the one at the sculptor head.
The fingers and the loop tools work directly on the clay, and the form often hides the part being worked. 3D hand pose with a visibility flag per joint says which joints were seen and which were not, rather than guessing silently.
The catalog gives one line for the whole task. A written spec decides what counts as an episode, which form is made and where each step starts and ends, so the data matches the behaviour your policy needs.
Action segments are frame-accurate spans with a verb and a noun, so modelling and carving can be separated, or kept as one, as your spec decides.
A perpetual, buyer-owned commercial license backed by a documented consent chain, so a policy trained on the data can go into a product.
Definition
It is real-world, first-person video of a person doing the work the catalog row describes: modelling and carving clay into a sculptural form with hands and loop tools. Egocentric means the camera is worn on the head, so the footage shows the work from the sculptor point of view, with both hands in frame.
People reach this topic through several phrasings: egocentric ceramic sculpting data, first-person clay modelling video, a clay carving with loop tools dataset, or custom ceramics data collection. They describe one request from different angles. The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step.
No named robot or model has been trained on Firsthand data for this work.
Catalog row
The site lists one row in its Pottery & Ceramics Studio environment, in the Creative Workshops & Crafts sector. "Ceramic sculpting" reads "Model and carve clay into a sculptural form with hands and loop tools." and is rated Hard. The row lists its capture mode as Phone (head-mounted) / multiview rig and its status as Available on request.
The environment holds four further rows, wheel throwing, hand-building, glazing and kiln loading and firing, which this page does not claim. The site names no clay body, loop tool brand or other tool for this row, so those details are agreed in the written spec.
Status
The site defines Available on request plainly: the work is scoped and recruited to spec when a buyer asks. It is not the same as Ready to deploy, where contributors and site access are already set up, and it is not Active collection, where recording is already running and a spec can join an existing stream.
That means recruitment comes first for a ceramic sculpting order, and the timeline is quoted against your spec. The site does not state a volume, a number of studios or a number of hours for this row, and none are claimed here. It also states no delivered footage for it.
The site lists no off-the-shelf ceramic sculpting dataset, so this work is custom collection.
First-person view
The row names a head-mounted phone or multiview rig as its capture mode. The site says a head-mounted phone records the first-person view of real work, and that a multiview rig adds synchronized third-person angles when the spec asks for them. A wrist-mounted camera is stated as an option alongside the head camera for close-range detail.
For sculpting, close range matters because the fingers and loop tools work on a small area of the form. Whether an order uses a wrist view, a second angle or neither is set in the skill spec, since the site states no per-task rig for this row.
The row
The row names two actions on one material: model and carve clay into a sculptural form, with hands and loop tools. It describes no wheel, no slabs or coils and no firing step, which is what separates it from the other rows in the environment.
The site rates the row Hard, one of two Hard rows in the environment. It gives no clay type, piece size, number of pieces per episode, tool list or task time, and none are claimed here. Which form is sculpted, where an episode begins and ends, and whether modelling and carving are one episode or two are agreed in the spec rather than assumed.
Modelling and carving
The row words the task as model and carve, but it does not say how the two relate. Action segments carry start_ns, end_ns, verb and noun, so your spec decides how finely a session is cut: for example, one segment per addition of clay, per press, or per cut with a loop tool, or one longer segment for each of the two actions.
The site lists no label for the outcome of a step, such as whether a carved line came out as intended, and it names no specific loop tool. If your policy needs a shape outcome or a tool class, the spec has to define it. The comparison tables below set the row against its neighbours as the catalog states them.
Art studio row
The catalog has a second sculpting row, in a different environment: Art Studio (painting, sculpture, printmaking). "Sculpting" there reads "Shape clay, stone or wood with hands and tools into a three-dimensional form." and is also rated Hard and Available on request, with the same capture mode.
The difference is the setting and the material. Ceramic sculpting sits in the Pottery & Ceramics Studio, names clay only and names loop tools. The Art Studio row sits with painting and printmaking, and allows clay, stone or wood. The two rows are separate and are not merged here, so choose the row that matches the studio and the material your policy needs.
Hard cases
Hands are the first risk. The fingers and loop tools are in contact with the clay while the form is modelled and carved, and they hide the part being worked. The visibility flag on each joint is the answer the site gives, contact events mark when a hand meets an item, and masks are recorded per frame. Whether hand pose holds while the hands are in soft clay is not stated, so a sculpting order should check it on a Spec Pilot.
Surfaces are the second. The site states that depth degrades on wet and reflective surfaces, with confidence maps masking low-confidence regions, and that an episode is rejected when more than 35 percent of depth pixels in the manipulation region are invalid. Whether clay counts as a wet surface for this purpose is not stated, and it belongs in the pilot check.
Shape is the third. The site lists no force or tactile stream and no label for how a form comes out, so a spec that needs a shape outcome or a pressure reading has to define it.
Streams and labels
Each attempt is delivered as one episode, following the episode schema used across Firsthand custom collections: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events and frame-accurate action segments. Each episode carries one task instruction. Hand pose is stated as 21 joints per hand with a per-joint visibility flag, and sync is hardware-triggered onto one clock with a 2.0 ms cross-stream ceiling.
Action segments divide an episode into start- and end-timestamped spans, each carrying start_ns, end_ns, verb and noun. For this work, a segment might be one clay addition, one press or one cut, as written in the skill spec.
Stereo option
Not on the row as listed. The catalog names a head-mounted phone or multiview rig as the capture mode, so a stereo pair applies only through the site general stereo offer, agreed in the skill spec and confirmed on a Spec Pilot. This page claims no delivered stereo footage of ceramic sculpting.
If you want depth from two calibrated cameras, the stereo ceramic sculpting page covers that choice and MCAP delivery. This page keeps first-person capture as its subject.
Neighbouring pages
The egocentric pottery wheel throwing and hand-building page covers the two forming rows that involve the wheel or slabs and coils. This page covers the one row that names sculpting with loop tools. The egocentric pottery glazing and kiln loading page covers the two rows for surface and firing, and the egocentric pottery and ceramics page covers all five rows in one page.
The egocentric arts and crafts page covers a wider craft family, and the stereo ceramic sculpting page covers this same row with stereo and MCAP framing. None of the neighbours makes first-person ceramic sculpting its main topic. The comparison table below sets each against this page.
Privacy
Every contributor signs a written release before capture, and each delivered episode links to that record through a documented consent chain. Contributors are paid and consented, and footage that cannot be de-identified is discarded rather than shipped.
At ingest, automated detection finds faces, plates and screens and blurs them irreversibly, and a reviewer confirms the result before anything ships. The anonymization record is delivered with the data, and an undocumented bystander is a stated reject criterion. Whether finished sculptures or original designs are blurred or protected beyond the license is not stated. None of this is legal advice, and the executed agreement controls.
Delivery
Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd, and a custom order can be packaged as MCAP. The first three are training-loader formats, HDF5 and zarr carry arrays for custom pipelines, and Rerun .rrd gives a multi-stream synchronized playback file for review. The format table below sets each against its official documentation where it was read.
Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch. Object labels use the terms your spec sets, so labels follow the vocabulary your training stack expects rather than a generic taxonomy.
Fast · on demand · at scale
Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that timeline up front. The row is Available on request, so recruitment comes first and the range that applies is confirmed when the spec is quoted.
On-demand top-ups run against the same spec and accept criteria after each training run, so new data stays consistent with what you already hold. The site does not state a batch size or a later-batch turnaround, so those are quoted against your spec.
This is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The site states no provider counts, hours or throughput for this task, and none are claimed here.
The spec
You describe the sculpting sequences your policy needs. We turn that into a written spec covering tasks, environments, capture tier, annotation depth and accept criteria, then quote reach, timeline and price against that document before any capture begins.
A Spec Pilot, a small and fast first batch, can prove the spec, the rig choice and the accept criteria before you scale volume. The collection runs through the same seven-stage end-to-end custom collection pipeline as every Firsthand program: contributor recruiting, capture, per-batch QA, anonymization and licensed delivery. Billing is per validated hour, a reject log ships with every batch, and rejected items are recaptured at our cost.
At a glance
Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.
What the site states
| Where it appears | What the site states | Used on this page as |
|---|---|---|
| Task catalog, Pottery & Ceramics Studio | Five rows; one is Ceramic sculpting (Hard), Available on request | The stated task |
| Task catalog capture mode | Phone (head-mounted) / multiview rig on the row; no stereo pair is stated for it | How the row is listed |
| General stereo offer | A stereo pair is agreed in the skill spec and confirmed on a Spec Pilot | How stereo applies, if you want it |
| Episode schema | Ten streams synced under 2 ms; one task instruction per episode | What each episode carries |
| Hand pose | 21 joints per hand with a per-joint visibility flag | How the fingers are recorded |
| Task catalog | No clay type, loop tool brand, piece size, task time or success rate is stated | Not stated; scoped in the written spec |
Catalog row
| Task family | Catalog task and description | Skill | Capture mode | Status |
|---|---|---|---|---|
| Sculpting | Ceramic sculpting: model and carve clay into a sculptural form with hands and loop tools. | Hard | Phone (head-mounted) / multiview rig | Available on request |
Two sculpting rows
| Aspect | Ceramic sculpting | Sculpting (Art Studio) |
|---|---|---|
| Environment | Pottery & Ceramics Studio | Art Studio (painting, sculpture, printmaking) |
| Catalog wording | Model and carve clay into a sculptural form with hands and loop tools. | Shape clay, stone or wood with hands and tools into a three-dimensional form. |
| Material named | Clay | Clay, stone or wood |
| Tools named | Hands and loop tools | Hands and tools |
| Skill | Hard | Hard |
| Status | Available on request | Available on request |
| Capture mode | Phone (head-mounted) / multiview rig | Phone (head-mounted) / multiview rig |
| Clay type, piece size, task time | Not stated | Not stated |
Capture setup
| Capture mode | What the site says it records | Where it applies |
|---|---|---|
| Phone (head-mounted) / multiview rig | A head-mounted phone records the first-person view of real work; a multiview rig adds synchronized third-person angles when the spec asks for them | The catalog row |
| Head-mounted camera | Keeps both hands and the form in frame from the viewpoint a manipulation policy acts from | All episodes |
| Wrist-mounted camera | Available alongside the head camera for close-range detail | Stated as an option; per-task use set in the spec |
| Stereo pair | Applies only through the site general stereo offer: agreed in the skill spec and confirmed on a Spec Pilot | Not stated on the row |
| Hard-environments stack | 4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMU | Whether a sculpting order uses it: not stated |
| Sync | Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling | All episodes |
| Customer facility | Capture at a customer facility is not offered | Studio and contributors agreed in the spec |
Streams and labels
| Item | Status on this site | Why it matters here |
|---|---|---|
| Head and wrist RGB, depth | Stated; ten streams synced under 2 ms | Keeps the clay and both hands on one timeline |
| 3D hand pose with per-joint visibility | Stated; 21 joints per hand | Carries how the fingers sit on the form while it is modelled and carved |
| Contact and grasp events | Stated | Marks when the fingers and tools make and break contact with the clay |
| Per-frame instance masks | Stated; stored at 848×480 | Separates the form from the bench and the hands |
| Action segments | Stated; frame-accurate, with start_ns, end_ns, verb and noun | Marks modelling and carving as separate steps if the spec cuts them that way |
| Task instruction | Stated; one per episode | Names the sequence the episode shows |
| Force or tactile data | Not listed | Defined in the spec if the policy needs them |
| Clay types, loop tools, piece sizes | Not stated | Defined in the spec |
| Shape-outcome label, success rate | Not stated | No such claim is made on this page |
Formats
| Format | What the official documentation states | Used for here |
|---|---|---|
| RLDS | A dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README) | Episode-based training loaders |
| LeRobot | LeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation) | LeRobot dataset format and tooling |
| WebDataset | Tar files in which files that belong together share a basename, split into numbered shards (WebDataset README) | Sharded streaming for large training runs |
| MCAP | An open source container for multimodal log data with multiple channels of timestamped pre-serialized data (mcap.dev) | Optional multi-stream timestamped delivery, with layout set in the spec |
| HDF5 and zarr | Stated by Firsthand only | Array storage for custom pipelines |
| Rerun .rrd | Stated by Firsthand only | Multi-stream synchronized playback for review |
Related pages
| Page | Main topic | How this page differs |
|---|---|---|
| Egocentric ceramic sculpting data (this page) | The Ceramic sculpting row of the Pottery & Ceramics Studio, in first-person capture | Centres on modelling and carving clay with hands and loop tools |
| Egocentric pottery wheel throwing and hand-building data | The Wheel throwing and Hand-building rows in first-person capture | A different pair of rows: wheel, slabs and coils, not sculpting |
| Egocentric pottery glazing and kiln loading data | The glazing and kiln loading and firing rows in first-person capture | A different pair of rows: surface and firing, not forming |
| Egocentric pottery and ceramics video data | All five Pottery & Ceramics Studio rows in first-person capture | Covers the whole environment; sculpting is one row of five there |
| Egocentric arts and crafts data | A wider craft family in first-person capture | Not centred on the one ceramic sculpting row |
| Stereo ceramic sculpting data | The same Ceramic sculpting row with stereo and MCAP framing | Stereo and MCAP are its subject; first-person capture is the subject here |
| Stereo pottery and ceramics data | All five Pottery & Ceramics Studio rows with stereo and MCAP framing | Covers the whole environment in stereo |
Skill spec
| Spec element | What it decides | Where it shows up |
|---|---|---|
| Task and order | What an episode covers, and where modelling and carving each start and end | Episode boundaries and action segments; set per program |
| Forms and tools | Which forms are sculpted and which tools are in scope | Object labels; set per program |
| Rig and streams | Head and wrist views, a second angle, a stereo pair if wanted, hand pose and any others | The channels you can read; confirm on the Spec Pilot |
| Soft clay and depth | Whether soft clay is in scope and how depth is checked | Spec Pilot result; set per program |
| Step labels | Whether model and carve are separate labelled steps | Action segments; set per program |
| Delivery format | How the data is packaged | RLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or MCAP |
| Accept criteria | What passes QA, including what counts as a reject | Reject log per batch |
| Privacy | How people, plates and screens in frame are protected | Faces, plates and screens blurred at ingest |
| License | Who owns the dataset | Perpetual, buyer-owned commercial license; exclusivity available |
Example footage
One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show pottery, clay, sculpting or carving.
No ceramic sculpting clip is published on the site, so this is labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.
FAQ
Sources
Tell us the forms and tools, whether modelling and carving are one episode or two, whether soft clay is in scope, whether you want a stereo pair, the streams you want in the file and the delivery format. We will quote reach, timeline and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.