Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Task family

Egocentric Pottery Glazing and Kiln Loading Data

Mixing glaze, dipping or brushing it onto bisque pieces and wiping the foot clean, or stacking pieces on kiln shelves, setting the firing programme and unloading when cool: these are the surface and firing steps of a ceramics studio, done by hand around fragile work. This page covers egocentric pottery glazing data and first-person kiln loading and firing video for the two catalog rows that name this work: what a head-mounted view records, what each episode carries, and what the site does not state. We run custom ceramics data collection fast and on demand against a spec you write, through custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog rows
Two of five, in Pottery & Ceramics Studio
Status
Both Medium and Available on request, as the catalog lists them
Streams
Ten, synced under 2 ms
License
Perpetual, buyer-owned

Why first-person capture here

What does a head-mounted view add to glazing and kiln loading video?

01

The viewpoint a policy acts from

A head-mounted camera keeps the hands, the piece and the shelf in frame from the viewpoint a manipulation policy acts from. Glazing and kiln loading both happen at arm length, so the view that matters is the one at the worker head.

02

Fingers around the piece, flagged when hidden

Pieces are held, dipped and set down, and the fingers often hide the part being worked. 3D hand pose with a visibility flag per joint says which joints were seen and which were not, rather than guessing silently.

03

Two different task shapes on one scoped order

Glazing is a surface job done piece by piece. Kiln loading is a stacking, programming and unloading sequence. Both sit in one catalog environment, so one written spec can carry both, with each sequence defined and labelled separately.

04

Steps you can cut on a timeline

Frame-accurate action segments carry start_ns, end_ns, verb and noun, so a dip, a wipe of the foot or a shelf stacked can be its own labelled span on a shared timeline.

05

Rights you can ship on

A perpetual, buyer-owned commercial license backed by a documented consent chain, so a policy trained on the data can go into a product.

Why it matters

What is egocentric pottery glazing and kiln loading data, and why does it need its own page?

Egocentric pottery glazing and kiln loading data is real-world, first-person video of a person doing the work the catalog rows describe: mixing glaze, dipping or brushing it onto bisque pieces and wiping the foot clean, and stacking pieces on kiln shelves, setting the firing programme and unloading when cool. Egocentric means the camera sits at the worker head, so the footage shows what the worker sees and what the hands do.

The work is a demanding test for a manipulation policy. Pieces are fragile, the steps are sequential and the hands do most of the work. A piece has to be coated before it is placed, and pieces have to be stacked on shelves in an order that a person can unload later. Those are the situations where first-person video, hand pose and step labels help most.

The site already has an egocentric pottery and ceramics page, and it covers all five pottery rows, with glazing and kiln loading as two of them. This page does something narrower: it treats glazing and kiln loading as one first-person order, built on two of the five rows, and leaves wheel throwing, hand-building and ceramic sculpting to that page.

Catalog rows

Which catalog rows cover pottery glazing and kiln loading?

The site lists two rows in its Pottery & Ceramics Studio environment, in the Creative Workshops & Crafts sector. "Glazing" reads "Mix glaze, dip or brush it onto bisque pieces and wipe the foot clean." and is rated Medium. "Kiln loading and firing" reads "Stack pieces on kiln shelves, set the firing programme and unload when cool." and is rated Medium.

Both rows list their capture mode as Phone (head-mounted) / multiview rig, and both are listed as Available on request. The environment lists its examples as "Pottery studio, wheel throwing, hand-building, glazing, kiln firing, ceramic sculpting", and it holds three further rows, wheel throwing, hand-building and ceramic sculpting, which this page does not claim.

The site names no glaze, clay body, kiln model, wheel or tool brand for these rows, so those details are agreed in the written spec.

Status

What does Available on request mean for these rows?

The site defines Available on request plainly: the work is scoped and recruited to spec when a buyer asks. It is not the same as Ready to deploy, where contributors and site access are already set up, and it is not Active collection, where recording is already running and a spec can join an existing stream.

That means recruitment comes first for a glazing or kiln loading order, and the timeline is quoted against your spec. The site does not state a volume, a number of studios or a number of hours for either row, and none are claimed here.

The site lists no off-the-shelf pottery dataset, so this work is custom collection.

Glazing

What does the glazing half involve?

The row describes a short chain: mix glaze, dip or brush it onto bisque pieces, and wipe the foot clean. An episode can cover the whole chain or isolate one part of it, for example only the dip, or only the wipe of the foot. That is what a first-person glaze dipping video would show: the hands, the piece and the vessel from the worker view.

The row offers two routes to the same coating, dipping or brushing, and a spec can ask for one or both. The site gives no glaze recipe, no colour, no vessel, no brush, no number of pieces per episode and no task time for this row. It also gives no glaze chemistry and no handling instruction beyond the wording of the row, and this page adds none.

The site rates the row Medium. Which pieces are glazed, where an episode begins and ends and whether the mixing counts as part of an episode are agreed in the spec rather than assumed.

Kiln loading and firing

What does the kiln loading and firing half involve?

The row describes a longer sequence: stack pieces on kiln shelves, set the firing programme, and unload when cool. The catalog rates it Medium, the same as glazing.

The site states no kiln temperatures, firing schedules, cycle times, kiln models or piece sizes for this row. It also lists no thermal stream, so a kiln loading episode carries no temperature reading unless a spec sets one up. This page gives no instruction for working with a kiln beyond the wording of the row, and the site states nothing on kiln, heat, injury, safety, liability or certification.

How the sequence is cut into episodes, whether the firing itself falls inside an episode and how the unload is framed are agreed in the written spec.

First-person view

What does a head-mounted view record in this work?

The catalog names a head-mounted phone with a multiview rig as the capture mode for both rows. The head view keeps the hands, the piece and the shelf in frame from the viewpoint a manipulation policy acts from, and a wrist-mounted camera is available alongside it for close-range detail. A multiview rig adds synchronized third-person angles when the spec asks for them.

For glazing, that is the dip, the brush stroke and the wipe of the foot as the worker sees them. For kiln loading, it is the reach to a shelf, the placing of a piece and the pieces already stacked. The site states no field of view, resolution or frame rate for the head-mounted phone on these rows, and none are claimed here.

Hand pose is stated as 21 joints per hand with a per-joint visibility flag, and the cross-stream sync ceiling is stated as 2.0 ms on one hardware clock.

Stereo

Is this data captured in stereo?

Not on the rows as listed. The catalog names a head-mounted phone or multiview rig as the capture mode for both, and stereo applies only through the site general stereo offer: a stereo pair is agreed in the skill spec and confirmed on a Spec Pilot. This page claims no delivered stereo footage of glazing or kiln loading.

If you want a calibrated stereo pair, depth from every frame pair and an MCAP delivery for this work, the stereo pottery glazing and kiln loading page describes that framing. If a head-mounted phone or a multiview rig is enough, this page and the egocentric pottery and ceramics page describe that capture directly.

The site does not say which rig a given pottery order uses, so the rig is set in the spec and confirmed on a Spec Pilot batch.

Hard cases

What goes wrong when you record glazing and kiln loading?

Hands are the first risk. A piece is held between the fingers while it is dipped or wiped, and the fingers hide the part being worked. The visibility flag on each joint is the answer the site gives, contact events mark when a hand meets an item, and masks are recorded per frame.

Surfaces are the second. The site states that depth degrades on wet and reflective surfaces, with confidence maps masking low-confidence regions, and that an episode is rejected when more than 35 percent of depth pixels in the manipulation region are invalid. Whether a wet glaze or a glazed piece counts as reflective for this purpose is not stated, and a glazing order should check it on a Spec Pilot.

Heat is the third. The site notes that no thermal stream is listed, which matters for a row that works with a kiln, and force and tactile readings are not among the listed streams either.

Streams and labels

What does each episode contain?

Each attempt is delivered as one episode, following the episode schema used across Firsthand custom collections: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events and frame-accurate action segments. Each episode carries one task instruction, and per-frame instance masks are stored at the depth resolution of 848×480.

Action segments divide an episode into start- and end-timestamped spans, each carrying start_ns, end_ns, verb and noun. For this work, a segment might be one dip, one wipe of the foot or one shelf stacked, as written in the skill spec. The site lists no label for the outcome of a step, such as whether a coat came out even.

Object labels use the terms your spec sets, so labels follow the vocabulary your training stack expects rather than a generic taxonomy.

Neighbouring pages

How is this different from the other pottery and ceramics pages?

The egocentric pottery and ceramics page covers all five pottery rows as first-person video, with glazing and kiln loading as two of them. The stereo pottery and ceramics page covers the same five rows with stereo and MCAP framing, and the stereo pottery glazing and kiln loading page centres on the two rows in stereo and MCAP. This page is the first-person version of that narrower order.

The deformable object page covers cloth, bedding and bags, the baking and dough handling page covers dough, and the glass and mosaic page covers a glass studio. None of them makes glazing and kiln loading its main topic. The comparison table below sets each against this page.

Privacy

How is contributor privacy handled?

Every contributor signs a written release before capture, and each delivered episode links to that record through a documented consent chain. Contributors are paid and consented, and footage that cannot be de-identified is discarded rather than shipped.

At ingest, automated detection finds faces, plates and screens and blurs them irreversibly, and a reviewer confirms the result before anything ships. The anonymization record is delivered with the data, and an undocumented bystander is a stated reject criterion.

Whether finished pieces or original designs are blurred or protected beyond the license is not stated, and mirror reflections and posted signage are not listed as blur categories. Safety certifications, protective equipment and injury handling for kiln work are not stated either, and this page makes no such claim. None of this is legal advice, and the executed agreement controls.

Delivery

How is the data labeled and delivered?

Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd, and a custom order can be packaged as MCAP. The first three are training-loader formats, HDF5 and zarr carry arrays for custom pipelines, and Rerun .rrd gives a multi-stream synchronized playback file for review. The format table below sets each against its official documentation where it was read.

MCAP is a container for timestamped log data, not a training format. If your training loop expects RLDS, LeRobot or WebDataset, name that format in the spec alongside MCAP. Topic names, message encoding and rates are not stated on the site and are agreed in the skill spec.

Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch.

Fast · on demand · at scale

How fast can a custom pottery glazing and kiln loading dataset be collected?

Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that timeline up front. Both rows are Available on request, so recruitment comes first and the range that applies is confirmed when the spec is quoted.

On-demand top-ups run against the same spec and accept criteria after each training run, so new data stays consistent with what you already hold. The site does not state a batch size or a later-batch turnaround, so those are quoted against your spec.

This is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The site states no provider counts, hours or throughput for this task, and none are claimed here.

The spec

How do you start a pilot?

You describe the glazing and kiln loading sequences your policy needs. We turn that into a written spec covering tasks, environments, capture tier, annotation depth and accept criteria, then quote reach, timeline and price against that document before any capture begins.

A Spec Pilot, a small and fast first batch, can prove the spec and the accept criteria before you scale volume. The collection runs through the same seven-stage end-to-end custom collection pipeline as every Firsthand program: contributor recruiting, capture, per-batch QA, anonymization and licensed delivery. Billing is per validated hour, a reject log ships with every batch, and rejected items are recaptured at our cost.

At a glance

What you get.

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

What the site states

What does the site state about pottery glazing and kiln loading?

Where the work appears on this site, what each place states and how this page uses it.
Where it appearsWhat the site statesUsed on this page as
Task catalog, Pottery & Ceramics StudioFive rows; two are glazing and kiln loading and firing, both Medium and Available on requestThe stated tasks
Environment examplesPottery studio, wheel throwing, hand-building, glazing, kiln firing, ceramic sculptingContext for the setting
Task catalog, same environmentThree further rows: wheel throwing, hand-building and ceramic sculptingNeighbouring work, not claimed here
General stereo offerA stereo pair is agreed in the skill spec and confirmed on a Spec PilotHow stereo applies, if you want it
Episode schemaTen streams synced under 2 ms; one task instruction per episodeWhat each episode carries
Task catalogNo glaze recipe, clay body, kiln temperature, firing schedule, tool model or success rate is statedNot stated; scoped in the written spec

Catalog rows

Which two catalog rows does this page cover?

The two rows exactly as listed in the Pottery & Ceramics Studio environment, with the catalog description, skill rating, capture mode and status.
Task familyCatalog task and descriptionSkillCapture modeStatus
SurfaceGlazing: mix glaze, dip or brush it onto bisque pieces and wipe the foot cleanMediumPhone (head-mounted) / multiview rigAvailable on request
FiringKiln loading and firing: stack pieces on kiln shelves, set the firing programme and unload when coolMediumPhone (head-mounted) / multiview rigAvailable on request

Capture setup

How is this work recorded?

The capture mode named in the catalog for the two rows, and where stereo applies.
Capture modeWhat the site says it recordsWhere it applies
Phone (head-mounted) / multiview rigA head-mounted phone records the first-person view of real work; a multiview rig adds synchronized third-person angles when the spec asks for themBoth catalog rows
Head-mounted cameraKeeps the hands, the piece and the shelf in frame from the viewpoint a manipulation policy acts fromAll episodes
Wrist-mounted cameraAvailable alongside the head camera for close-range detailStated as an option; per-task use set in the spec
Stereo pairApplies only through the site general stereo offer: agreed in the skill spec and confirmed on a Spec PilotNot stated on the rows
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether a pottery order uses it: not stated
Customer facilityCapture at a customer facility is not offeredStudio and contributors agreed in the spec

Streams and labels

What does each episode carry, and what is not stated?

Streams and labels the site states for Firsthand custom collections, and fields the site does not state for these rows.
ItemStatus on this siteWhy it matters here
Head and wrist RGB, depthStated; ten streams synced under 2 msKeeps the piece, the shelf and the hands on one timeline
3D hand pose with per-joint visibilityStated; 21 joints per handCarries the grip on a bisque piece and the reach to a kiln shelf
Contact and grasp eventsStatedMarks when the fingers make and break contact with an item
Per-frame instance masksStated; stored at 848×480Separates a piece from the shelf, the vessel and the bench
Action segmentsStated; frame-accurate, with start_ns, end_ns, verb and nounMarks dipping, wiping, stacking and unloading as separate steps
Task instructionStated; one per episodeNames the sequence the episode shows
Thermal stream, force or tactile dataNot listedDefined in the spec if the policy needs them
Glaze recipes, kiln temperatures, firing schedules, tool modelsNot statedDefined in the spec
Task-completion label, success rateNot statedNo such claim is made on this page

Formats

Which formats carry this data?

Delivery formats stated on the site, set against what each format official documentation states where the documentation was read.
FormatWhat the official documentation statesUsed for here
RLDSA dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README)Episode-based training loaders
LeRobotLeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation)LeRobot dataset format and tooling
WebDatasetTar files in which files that belong together share a basename, split into numbered shards (WebDataset README)Sharded streaming for large training runs
MCAPAn open source container for multimodal log data with multiple channels of timestamped pre-serialized data (mcap.dev)Optional multi-stream timestamped delivery, with layout set in the spec
HDF5 and zarrStated by Firsthand onlyArray storage for custom pipelines
Rerun .rrdStated by Firsthand onlyMulti-stream synchronized playback for review

Related pages

How is this page different from the neighbouring pottery and craft pages?

Related collection pages on this site and how their main topic differs from this one.
PageMain topicHow this page differs
Egocentric pottery glazing and kiln loading data (this page)The two Pottery & Ceramics Studio rows for glazing and kiln loading and firing, in first-person captureCentres on both tasks together, without stereo as its subject
Stereo pottery glazing and kiln loading dataThe same two rows with stereo and MCAP framingStereo pair and MCAP are its subject; this page leads with the head-mounted view
Egocentric pottery and ceramics video dataAll five Pottery & Ceramics Studio rows in first-person capture, with ten streams synced under 2 msWheel throwing, hand-building and ceramic sculpting are in scope there, not here
Stereo pottery and ceramics dataAll five Pottery & Ceramics Studio rows with stereo and MCAP framingCovers the whole environment in stereo
Egocentric deformable object dataCloth, bedding and bagsA different material class
Egocentric baking and dough handling dataDoughA different material and setting
Egocentric glass and mosaic dataThe Glass & Mosaic Studio rowsA glass studio, not a ceramics studio

Skill spec

What the skill spec fixes for this order

Spec element and where a buyer can see it in the delivery. Set per program means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Tasks and orderWhether an episode is glazing, kiln loading or both, and where each starts and endsEpisode boundaries and action segments; set per program
Pieces and toolsWhich bisque pieces are glazed and which shelves and tools are in scopeObject labels; set per program
Rig and streamsHead and wrist views, a second angle, a stereo pair if wanted, hand pose and any othersThe channels you can read; confirm on the Spec Pilot
Wet and glazed surfacesWhether wet or glazed pieces are in scope and how depth is checkedSpec Pilot result; set per program
Step labelsWhether mix, dip, wipe, stack and unload are separate labelled stepsAction segments; set per program
Delivery formatHow the data is packagedRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or MCAP
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people, plates and screens in frame are protectedFaces, plates and screens blurred at ingest
LicenseWho owns the datasetPerpetual, buyer-owned commercial license; exclusivity available

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show pottery glazing or kiln loading.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a pottery clip

No pottery glazing or kiln loading clip is published on the site, so this is labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric pottery glazing data, answered.

What is egocentric pottery glazing and kiln loading data?
It is first-person video of a person glazing bisque pieces and stacking, firing and unloading a kiln. The catalog rows name a head-mounted phone or multiview rig, and each episode carries ten streams synced under 2 ms, including hand pose and action segments. Firsthand collects it to a written spec.
Which catalog rows cover it, and what is their status?
Two rows in Pottery & Ceramics Studio: Glazing (Medium) and Kiln loading and firing (Medium). Both are Available on request, with a head-mounted phone or multiview rig as the capture mode.
Is the data captured in stereo?
Not on the rows as listed. Stereo applies only through the site general stereo offer, agreed in the skill spec and confirmed on a Spec Pilot, and this page claims no delivered stereo footage of these tasks.
Does the data include temperature or force readings?
Not stated. The site lists no thermal stream and no force or tactile stream, so any such reading would have to be set up in the spec. The site also states no kiln temperatures or firing schedules for the kiln loading and firing row.
How is this different from the pottery and ceramics pages?
The egocentric and stereo pottery and ceramics pages each cover all five rows, including wheel throwing, hand-building and ceramic sculpting. This page centres on glazing and kiln loading in first-person capture, and the stereo glazing page covers the same two rows in stereo and MCAP.
How fast can a custom dataset be collected?
Where coverage is deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, and both rows are Available on request, so recruitment comes first and a Spec Pilot can prove the spec.
Which delivery formats are available?
RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd, and a custom order can be packaged as MCAP. Topic names and layout for MCAP are agreed in the skill spec.
What license does the data ship under?
A perpetual, buyer-owned commercial license, with exclusivity available, documented alongside the consent chain.

Sources

Where are the delivery formats documented?

Request a custom pottery glazing and kiln loading dataset.

Tell us the pieces and shelves, whether an episode is glazing, kiln loading or both, whether wet or glazed pieces are in scope, whether you want a stereo pair, the streams you want in the file and the delivery format. We will quote reach, timeline and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.