Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Egocentric Dental Prosthesis Fabrication Data

Fabricating crowns, dentures and dental appliances in a dental laboratory is one row in the site’s task catalog, rated Hard. This page covers egocentric dental lab data for that one row: first-person crown and denture fabrication video, what a dental appliance robot dataset needs from the capture, and what the site does and does not state. We run custom dental lab data collection fast and on demand against a written skill spec, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
Dental Prosthesis Manufacturing, in Dental Lab & Medical Device Workshop
Skill and status
Hard; Available on request, as the catalog lists it
Catalog capture setup
Phone (head-mounted) / multiview rig
License
Perpetual, buyer-owned

Why first-person here

What does a first-person view add to dental prosthesis fabrication video?

01

The hands and the work in one frame

A head-mounted view keeps both hands and the work in frame, close to what a robot’s onboard camera would see at a bench. Hand pose, contact events and per-frame instance masks are recorded on one clock.

02

Fingers hidden by the work, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger hidden behind a part is marked as hidden rather than silently filled in.

03

Steps labeled as segments

Action segments carry start_ns, end_ns, verb and noun, so each step of the fabrication can be its own labeled span instead of one long clip. Which verbs and nouns are used is set in the skill spec.

04

Accept criteria written before capture

What counts as a finished crown, denture or appliance is written into the spec up front. The site lists no fit, finish or success label that would define it afterwards.

Definition

What is egocentric dental prosthesis fabrication data?

It is first-person video of a person doing the work named in one catalog row, fabricating crowns, dentures and dental appliances in a dental laboratory, recorded from their own point of view with synchronized sensor streams alongside. People reach it through several phrasings: egocentric dental lab data, first-person crown and denture fabrication video, a dental appliance robot dataset, or custom dental lab data collection. They describe one request from different angles.

The data is human capture. A paid, consented contributor wears the rig and performs the task to a written skill spec. It is not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step, and it is not a fixed corpus you download: the site lists no off-the-shelf dental prosthesis dataset, so this is custom collection.

Catalog row

Which catalog row does this page rely on, and what is its status?

One row, in the Dental Lab & Medical Device Workshop environment of the Healthcare & Life Sciences sector, whose examples line reads "Dental laboratory, sterile processing, medical device assembly". It is named "Dental Prosthesis Manufacturing" and reads "Fabricating crowns, dentures and dental appliances in a dental laboratory." Its skill is Hard, its capture setup is Phone (head-mounted) / multiview rig and its status is Available on request. The first table below reproduces it.

Available on request means the work is scoped and recruited to spec when a buyer asks for it. It does not mean collection is running, and it does not mean a stock of dental prosthesis footage exists, so this page never calls the row active or ongoing and claims no volume, hours or delivered clips. The row names three kinds of work product and one setting. It names no particular material, tool, machine or step, so anything more specific goes into the skill spec.

Hard row

Why is the Dental Prosthesis Manufacturing row rated Hard?

On this site, Hard is the skill level shown in the catalog’s Skill column, one of Easy, Medium or Hard, and this page uses the word in no other sense. The row carries it. The hard-task hub lists every row rated Hard, grouped by environment, and this row is one of them.

What the row text itself shows is a description of three work products made in a laboratory. Existing site copy adds that dental lab bench work is small parts and fine tools, with two hands that hide the work from a single camera. The site publishes no failure rate, tolerance or claim about workers’ skill for this row, so this page makes none.

Difference

How is this different from the egocentric dental lab, stereo dental lab, surgical instrument handling and dental clinic pages?

The egocentric dental lab and medical device workshop page is broader. It covers both rows in the environment, Dental Prosthesis Manufacturing and Surgical Instrument Technician, so prosthesis fabrication is one of two rows there. This page is about the one prosthesis row only, which is why the hard-task hub now points that row here.

The stereo dental lab and instrument reprocessing page covers the same two rows as a stereo and MCAP question. The egocentric surgical instrument handling page covers the instrument rows across several environments. The egocentric dental clinic page covers chairside work, such as tray setup. The comparison table below sets the pages side by side.

Capture setup

What capture setup does the row list?

The catalog lists "Phone (head-mounted) / multiview rig" for the row. The catalog describes the head-mounted phone as recording the first-person view of real work, and a multiview rig adds synchronized third-person angles when the spec asks for them. The catalog does not say which of its two modes applies to a dental prosthesis program, so that is confirmed in the skill spec.

The site also describes a ten-stream instrumented tier: a head-mounted stereo rig worn by the contributor, with first-person RGB and metric depth recovered from the calibrated rig. Whether a dental prosthesis program uses it is Not stated. The site lists capture at a customer’s own facility as not offered, so the setting is agreed in the spec. The capture setup table below lists the figures the site states.

Episodes

What does each episode contain?

Each attempt is delivered as one episode. On this site the standard episode carries action segments, 3D hand pose for both hands with a per-joint visibility flag, contact events that mark when a hand meets an item, an objects list, and per-frame instance masks stored at the depth resolution of 848×480.

Force and tactile readings are not among the listed streams, and neither is any label for whether a result is acceptable. If your model needs one of those, say so in the spec before capture, because the site does not promise it.

Why it is demanding

What makes fabricating crowns, dentures and dental appliances demanding to capture?

The reasons come from the row text and existing site copy only. First, the row is rated Hard in the catalog. Second, the row describes three different work products in one description, so a program has to say which of them it wants. Third, small parts and fine tools put the hand and the work in close contact, and the site states that the hands occlude the work. That is why hand pose carries a per-joint visibility flag, why contact events mark when a hand meets an item, and why masks are recorded per frame.

The site states that metric depth on sub-centimetre parts is flagged rather than interpolated. Whether a given crown, denture or appliance component counts as such a part is Not stated, and so is a mask accuracy figure. The site also states that depth degrades on wet and reflective surfaces. Whether anything on a dental bench counts as wet or reflective is Not stated.

Steps

Which steps can a spec label?

The row gives no steps, only a description, so the steps come from the spec. A spec that says "fabricate the crown" gives one long action segment. A spec that names each stage you want separated gives a sequence you can slice by step, each with start_ns, end_ns, verb and noun.

Whether an episode covers one stage, one work product or a longer run is a spec decision, not a default. The site sets no episode length for this row. The catalog does not name any sub-step, so this page names none and gives no fabrication procedure. What counts as a finished step is Not stated and is written into the spec as accept criteria before capture.

Labels and QA

How is the data validated?

Validation runs against signed accept criteria written into the spec before capture, and a reject log ships with each batch. Episodes are machine-checked against stated reject criteria, including a sync breach, calibration drift, the manipulated object out of frame for more than 15 percent of the episode, an undocumented bystander, and a mismatch against the named skill spec. A human reviewer then checks each episode.

Only footage that clears the criteria is billed as a validated hour, and rejected items are recaptured at our cost. For this row, the spec decides what the manipulated object is: the work product, a part of it or a tool.

People and consent

What does the site say about contributors, consent and privacy?

Every contributor signs a written release, and each delivered episode links to it through consent artefact IDs in the batch data card. The consent chain has six checkpoints, and a break at any one discards the footage. At ingest, automated detection finds faces, plates and screens and blurs them irreversibly. Speech is scrubbed of names, addresses and card numbers, while ambient audio is kept. A reviewer confirms that no un-consented person is identifiable in any frame, and footage that cannot be de-identified is discarded. The anonymization record ships with the data.

Whether case paperwork or labels on a bench are blurred is not stated. The catalog notes HIPAA compliance for its Hospital & Clinical Care environment, but states nothing like it for dental lab work, so this page makes no regulatory, clinical or patient-data claim. This is not legal advice, and the executed agreement controls.

Not stated

What does the site not state about materials, tools and results?

Materials, tool and machine names and brands, lab types and sizes, cycle times, error rates, and what a correct or finished crown, denture or appliance means are Not stated. They are set in the written spec, and this page claims none of them. The site also states no result from training any model on this data, and names no lab, technician, dentist or customer for this row.

Scale and speed

How do custom, fast and on-demand collection apply to dental prosthesis fabrication?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets. None of the site’s off-the-shelf dataset descriptions names dental prosthesis fabrication, so this is custom collection, not an off-the-shelf purchase.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. From signed spec to first validated batch, the timeline is a median of 48 hours where coverage is deep and three to four weeks where it is thin and contributors need to be recruited first. The row is Available on request, so the range that applies is confirmed when the spec is quoted rather than assumed. At program level, a pilot runs two to three weeks to first delivery and a standing program reaches full rate in four to six weeks. Collections are billed per validated hour, and the site publishes no price list, minimum order or batch size for this row, so those are set in your quote.

Delivery

Which formats and license come with the data?

Delivery is in the format your stack already reads: RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata, with readable converter source alongside so the schema can be retargeted to your own loader.

The license is perpetual, irrevocable and worldwide, with the data buyer-owned and non-exclusive by default. Training, evaluating, fine-tuning and deploying models, including commercial ones, is permitted, and exclusivity is available as a separate term. The executed agreement controls.

Ordering

How do you order a custom dental prosthesis fabrication dataset?

Describe which of crowns, dentures and dental appliances are in scope, where each task starts and ends, what counts as a finished step, and whether an episode covers one stage or a longer run. Add the setting and lighting, the privacy rule for the bench and anyone in frame, and the variation your pipeline is missing. Then name the streams you want and the delivery format.

Most programs begin with a Spec Pilot, a small, fast first batch that proves the spec and accept criteria on real footage before you scale. The last table below shows what each spec element decides. For the full list of rows rated Hard, see the hard-task hub linked below.

At a glance

What you get.

Catalog row
"Dental Prosthesis Manufacturing": "Fabricating crowns, dentures and dental appliances in a dental laboratory." Dental Lab & Medical Device Workshop, Healthcare & Life Sciences; Hard; Available on request
Catalog capture setup
Phone (head-mounted) / multiview rig
Episode contents
Action segments, 3D hand pose for both hands with a per-joint visibility flag, contact events, objects list, per-frame instance masks stored at 848×480
Sync and calibration
Hardware-triggered onto one PTP clock domain, aligned under 2 ms; calibration twice per session under a 0.28 px RMS gate
Delivery
RLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or raw streams with metadata
Materials, tools, lab types, cycle times, error rates, fit or finish labels
Not stated; agreed in the skill spec
Regulatory, clinical or patient-data claims
Not stated; none is made on this page
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers dental prosthesis fabrication?

The row relied on by this page, with the catalog description, environment, skill, capture setup and status as listed.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Dental Prosthesis ManufacturingFabricating crowns, dentures and dental appliances in a dental laboratory.Dental Lab & Medical Device WorkshopHardPhone (head-mounted) / multiview rigAvailable on request

Compared pages

How does this page differ from the other dental and instrument pages?

Each page, its main topic and how it treats the Dental Prosthesis Manufacturing row. “Not covered” means the page leaves it out.
PageMain topicCapture framingTreatment of the Dental Prosthesis Manufacturing row
This page: egocentric dental prosthesis fabrication dataThe Dental Prosthesis Manufacturing row onlyFirst-person, head-mounted phone or multiview rig as the catalog lists itThe whole page: scope, limits, labels and ordering
Egocentric dental lab and medical device workshop dataBoth rows in Dental Lab & Medical Device WorkshopFirst-person, as the catalog lists itOne of two rows; the Surgical Instrument Technician row is covered too
Stereo dental lab and instrument reprocessing dataThe same two rowsStereo pair, agreed in the skill spec; not stated on the rowsOne of two rows, treated as a stereo and MCAP question
Egocentric surgical instrument handling dataInstrument handling rows across several environmentsFirst-personNot covered as a prosthesis page
Egocentric dental clinic dataChairside work in Dental ClinicFirst-personNot covered; the clinic rows are different rows
Hard task data collectionEvery catalog row rated Hard, grouped by environmentAs each row lists itRow listed in the hub table with its status and capture setup

Capture setup

What is the capture setup for a dental prosthesis collection?

The capture setup as stated on this site. Counts of sites, contributors, episodes and hours are set in the skill spec.
PartAs stated on this siteFor this row
Catalog capture modeHead-mounted phone for the first-person view of real work; a multiview rig adds synchronized third-person angles when the spec asks for themStated in the catalog; which mode applies is confirmed in the skill spec
Instrumented tierHead-mounted stereo rig worn by the contributor; first-person RGB with metric depth recovered from the calibrated rigWhether a program uses it: Not stated
Streams (instrumented tier)Ten: 4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation, action labelsStated; set in the spec
SyncHardware-triggered onto one PTP clock domain; aligned under 2 msStated
Hand pose21 joints per hand, 3D, in metres in the head-camera frame; per-joint visibility flagStated
CalibrationTwice per session; accepted only under the 0.28 px RMS reprojection gateStated
MasksPer-frame instance masks, stored at 848×480Stated
SettingCapture at a customer’s own facility is not offeredSetting agreed in the skill spec

Demands and streams

Which stated challenge maps to which stream or label?

Each challenge mapped to a stream or label this site already states. Where nothing is stated, the row says so.
ChallengeWhat the site statesStated stream or label
Small parts hidden by the handThe hands occlude the work; fingers disappear behind objects3D hand pose with per-joint visibility flags; per-frame instance masks; reject if the object is out of frame for more than 15% of an episode
Fine tool contactHand and work are in close contactContact events mark when a hand meets an item; no finer contact label is stated
Two-handed workingTwo-handed fine motion is where occlusion bitesHead-mounted view keeping both hands in frame; hand pose and contact events on one clock
Finish and fit qualityNo such label is listedNot stated: completion is defined in the spec and episode boundaries
Force and contact pressureNo force or tactile stream is listedNot stated

Delivered vs not stated

What is delivered and what is not stated?

Delivered items are stated elsewhere on this site. Items marked not stated are not promised on this page.
ItemStatusDetail
Action segmentsDeliveredstart_ns, end_ns, verb, noun, one per step
3D hand poseDelivered21 joints per hand; per-joint visibility flag for occluded fingers
Contact eventsDeliveredThe moment a hand meets an item
Per-frame instance masksDeliveredStored at 848×480
Consent and anonymization recordsDeliveredConsent artefact IDs per episode; anonymization record shipped with the data
Materials, tools, machines, lab types or sizesNot statedAgreed in the skill spec
Cycle times and throughputNot statedNo such figure is listed
Number of sites, episodes and hoursNot statedSet per program in the skill spec
Quality, fit or success labelsNot statedNo such label is listed
Regulatory status and patient-data handlingNot statedNo such statement exists for this environment

Delivery and licensing

What is delivered, in which formats, and under what license?

Delivery and licensing terms as stated on this site. “Set per program” means the site states no fixed value.
ItemAs stated on this siteNote
FormatsRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd, or raw streams with metadataChosen in the skill spec; converter source ships with the data
LicensePerpetual, irrevocable, worldwide, buyer-owned, non-exclusive by defaultExclusivity is available as a separate term; the executed agreement controls
BillingPer validated hourRejected items are recaptured at our cost
PrivacyFaces, plates and screens blurred irreversibly; footage that cannot be de-identified is discardedAnonymization record delivered with the data
Timelinea median of 48 hours to first validated batch where coverage is deep; three to four weeks where thinWhich applies to this row is Not stated; quoted against your spec
Price, minimum order, batch sizeNot published for this rowSet in your quote

Skill spec

What does the skill spec fix for a dental prosthesis order?

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Work productsWhich of crowns, dentures and dental appliances are in scopeWhat the cameras see; set per program, no per-product label is stated
Tasks and orderWhat one step is and how steps are namedEpisode boundaries and action segments; set per program
Episode boundaryOne stage, one work product or a longer runSet per program; the site does not state an episode length for this row
Object definitionWhether the work product, a part or a tool counts as the objectContact events and the out-of-frame reject rule; set per program
Capture modeHead-mounted phone, multiview angles, wrist views and any othersThe streams you can read; confirm on the Spec Pilot
People and privacyWhat may be in frame and how it is handledSettled before capture; bystander handling is a stated reject criterion
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
Delivery formatHow the data is packagedRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or raw streams
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show dental prosthesis fabrication or any dental lab work.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a dental lab clip

No dental lab clip is published on the site, so this is the nearest first-person clip, labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric dental lab data, answered.

What is egocentric dental prosthesis fabrication data?
Custom first-person video of a paid, consented contributor fabricating crowns, dentures and dental appliances in a dental laboratory, captured to a written skill spec.
Which catalog row covers it, and what is its status?
One row, "Dental Prosthesis Manufacturing", in Dental Lab & Medical Device Workshop: "Fabricating crowns, dentures and dental appliances in a dental laboratory." It is rated Hard, lists a head-mounted phone or multiview rig, and is Available on request. This page claims no volume or hours.
What does Hard mean here?
Only the skill level the catalog lists in its Skill column, one of Easy, Medium or Hard. The site states no failure rate, tolerance or worker skill claim for this row.
How is this different from the egocentric dental lab page?
The egocentric dental lab page covers both rows in the environment, including Surgical Instrument Technician. This page is about the Dental Prosthesis Manufacturing row only.
Is there an off-the-shelf dental prosthesis dataset?
No. None of the site’s off-the-shelf dataset descriptions names dental prosthesis fabrication. It is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
How fast can a custom dental lab dataset be collected?
From signed spec to first validated batch, a median of 48 hours where coverage is deep and three to four weeks where it is thin. The row is Available on request, so ask which applies when you request the quote.
Do you provide fit, finish, force or tactile labels?
Not stated. The delivered fields are action segments, 3D hand pose with visibility flags, contact events, objects and per-frame instance masks.
Who owns the data and in which formats does it arrive?
The buyer owns the delivered data under a perpetual, non-exclusive commercial license by default. Formats are RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata.

Sources

Where are the delivery formats documented?

Request a custom dental prosthesis fabrication dataset.

Tell us which of crowns, dentures and dental appliances are in scope, where each task starts and ends, whether an episode covers one stage or a longer run, the setting, the privacy rule for the bench, and the streams and format you want. We will quote reach, timeline and price against a written spec.