Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Stereo Dental Prosthesis Fabrication Data

Fabricating crowns, dentures and dental appliances in a dental laboratory is one row in the site’s task catalog, rated Hard. This page covers stereo dental prosthesis video for that one row: what a calibrated stereo pair adds to a dental lab bench dataset, how it differs from the egocentric and the two-row stereo pages, and what the site does and does not state. We run custom dental lab data collection fast and on demand against a written skill spec, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
Dental Prosthesis Manufacturing, in Dental Lab & Medical Device Workshop
Skill and status
Hard; Available on request, as the catalog lists it
Catalog capture setup
Phone (head-mounted) / multiview rig
License
Perpetual, buyer-owned

Why stereo here

What does a stereo pair add to dental prosthesis bench video?

01

Depth on small work

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the work, the tool and both hands sit in one frame. It gives no depth accuracy figure for this row, and it states that metric depth on sub-centimetre parts is flagged rather than interpolated.

02

Fingers hidden by the work, flagged not guessed

The site states that the hands occlude the work and that fingers disappear behind objects. 3D hand pose carries a per-joint visibility flag, so a finger folded behind a prosthesis is marked as hidden rather than silently filled in.

03

One row, one subject

This page is about fabricating crowns, dentures and dental appliances only. Surgical instrument handling is a different catalog row and is covered on the two-row stereo dental lab page.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo dental prosthesis fabrication data?

It is first-person video of a person fabricating crowns, dentures and dental appliances in a dental laboratory, recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: stereo dental prosthesis video, crown and denture fabrication robot data, a dental lab bench dataset, or custom dental lab data collection at scale. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page rely on, and what is its status?

One, listed under the Dental Lab & Medical Device Workshop environment in the Healthcare & Life Sciences sector: "Dental Prosthesis Manufacturing", described as "Fabricating crowns, dentures and dental appliances in a dental laboratory." It is rated Hard, lists "Phone (head-mounted) / multiview rig" as the capture setup, and is Available on request.

Available on request means the work is scoped and recruited to spec when a buyer asks for it, rather than running as an open capture stream today. The site states no delivered hours and no delivered stereo footage for this row, so this page claims none. The catalog does not break the row into sub-steps and names no tool or material, so none is named here beyond what the description says.

Difference

How is this different from the egocentric prosthesis page and the stereo dental lab and instrument reprocessing page?

The egocentric dental prosthesis fabrication page covers the same row as first-person video that is not stereo as its subject. The stereo dental lab and instrument reprocessing page treats two rows, Dental Prosthesis Manufacturing and Surgical Instrument Technician, and spends half its length on instrument sets. This page is the stereo treatment of the prosthesis row alone, so every table and section here is about crowns, dentures and dental appliances.

The egocentric dental lab page covers both rows in the environment as first-person video. The comparison table below sets the pages side by side.

Capture setup

What capture setup does the row list, and where does stereo come in?

The catalog lists "Phone (head-mounted) / multiview rig" for this row. The site does not state a stereo pair for it, and this page does not claim the row is already captured in stereo. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The catalog does not say which of its two modes applies, and the site lists capture at a customer’s own facility as not offered, so the setting is agreed in the spec.

The site describes two stereo setups and does not say which one an order for this row uses. The hard-environments stack is a global-shutter 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, a depth sensor at 848×480 and 30 fps, and 200 Hz 6-DoF IMUs. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. Camera count, resolution and frame rate for this row are Not stated.

Why stereo

Why capture dental prosthesis fabrication in stereo?

Fabricating a crown, a denture or a dental appliance is bench work on small parts: one hand steadies the work while the other holds a tool, and the part and the fingers occupy a small part of the frame together. The catalog calls the row Hard, and that is all the site says about its difficulty. A stereo pair recovers depth from the calibrated frame pair rather than from a standalone depth sensor, so the geometry of the part and the hands sits in the same capture that shows the fingers working.

A stereo pair adds depth, not a verdict on whether a prosthesis fits or is finished. The site lists no fit, finish or success label for this row, and none is claimed. What counts as a finished crown, denture or appliance is Not stated and is written into the spec as accept criteria before capture.

Occlusion

What do the hands and the work do to visibility?

At a bench the hands sit between the camera and the work, and a small part can vanish behind a finger. The site states that the hands occlude the work and that fingers disappear behind objects. That is why each hand joint carries a visibility flag, why contact events mark when a hand meets an item, and why instance masks are recorded per frame.

The site says two-handed fine motion and small objects are where occlusion bites, and it states that depth degrades on wet and reflective surfaces. Whether a crown, a denture or a dental appliance counts as a sub-centimetre part or a reflective surface is Not stated, and so is whether gloved hands change hand pose or a mask accuracy figure. A spec that needs a clear view of a step should name that step, ask for wrist views or a multiview angle, and confirm it on a Spec Pilot.

People and privacy

What does the site say about workers, consent, privacy and patient data?

The site states a consent chain for contributors. Every contributor signs a written release, each delivered episode links to it through consent artefact IDs, and a break at any of the six checkpoints discards the footage. An undocumented bystander is a stated reject criterion. For every delivered episode the site states that faces, plates and screens are detected and irreversibly blurred at ingest, that a reviewer confirms the result before anything ships, and that footage that cannot be de-identified is discarded. The anonymization record ships with the data.

This page does not imply that patient data is captured, and the site states no patient-data handling for this environment. Whether case paperwork or labels on a bench are blurred is Not stated. The page makes no regulatory, certification or clinical claim, names no lab, and gives no fabrication procedure. Who may be in frame is agreed in the spec. This is not legal advice, and the executed agreement controls.

Not stated

What does the site not state about materials, equipment and results?

Materials, equipment brands and models, lab types and sizes, cycle times, error rates, the number of steps in a prosthesis, customer and lab names, and what a correct or finished result means are Not stated. They are set in the written spec, and this page claims none of them.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page covers the format in full.

Streams

Which streams can ship in an MCAP delivery of dental prosthesis data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For this row the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch. The stream map table below sets each stream beside what the site states about it.

Failure modes

What goes wrong when you record prosthesis bench work in stereo, and what does QA reject?

Hand occlusion by the part and the tool is the first risk, under the visibility flag above. Two-handed fine motion is the second, and how often it leaves the frame is Not stated. Calibration is measured at the start and end of every session under a 0.28 px RMS gate, and an episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for an undocumented bystander or for a mismatch against the named skill spec.

A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. The failure-mode table below lists each mode beside what the site states.

Scale and speed

How do custom, fast and on-demand collection apply to dental prosthesis fabrication?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets, of which stereo is ~64,800 hours across 9 datasets. None of the site’s off-the-shelf dataset descriptions names dental prosthesis fabrication, so for stereo capture of this task it is custom collection, not an off-the-shelf purchase.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. From signed spec to first validated batch, the timeline is a median of 48 hours where coverage is deep and three to four weeks where it is thin and contributors need to be recruited first. The row is Available on request, so the range that applies is confirmed when the spec is quoted rather than assumed. At program level, a pilot runs two to three weeks to first delivery and a standing program reaches full rate in four to six weeks. Collections are billed per validated hour, and the site publishes no price list, minimum order or batch size for this row.

Ordering

How do you order a stereo dental prosthesis fabrication dataset?

Describe which of crowns, dentures and dental appliances are in scope, where each task starts and ends, what counts as a finished step, and whether an episode covers one stage or a longer run. Add the setting and lighting, the privacy rule for the bench and anyone in frame, and the variation your pipeline is missing. Then name the streams you want in the file, the topic naming and message encoding your reader expects, whether calibration ships inside the file or beside it, and whether MCAP is the only delivery or sits beside RLDS, LeRobot or WebDataset.

Most programs begin with a Spec Pilot, a small, fast first batch that proves the spec and accept criteria on real footage before you scale. The last table below shows what each spec element decides. For the full list of rows rated Hard, see the hard-task hub linked below.

At a glance

What you get.

Catalog row
"Dental Prosthesis Manufacturing": "Fabricating crowns, dentures and dental appliances in a dental laboratory." Dental Lab & Medical Device Workshop, Healthcare & Life Sciences; Hard; Available on request
Catalog capture setup
Phone (head-mounted) / multiview rig. The site states no stereo pair for this row, so a stereo pair is agreed in the skill spec through the general stereo offer
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync and calibration
Hardware-triggered onto one clock, 2.0 ms cross-stream ceiling; calibration twice per session under a 0.28 px RMS reprojection gate
Materials, tools, lab types, cycle times, error rates, fit or finish labels
Not stated; agreed in the skill spec
Regulatory, clinical or patient-data claims
Not stated; none is made on this page
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers dental prosthesis fabrication?

The row relied on by this page, reproduced as the catalog states it, plus items the catalog does not list.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Dental Prosthesis ManufacturingFabricating crowns, dentures and dental appliances in a dental laboratory.Dental Lab & Medical Device WorkshopHardPhone (head-mounted) / multiview rigAvailable on request
Separate steps such as trimming, wax-up, casting, finishing or polishingNot stated as separate rowsNot statedNot statedNot statedNot stated

Compared pages

How does this page differ from the other dental lab pages?

Each page, its main topic and how it treats the Dental Prosthesis Manufacturing row. “Not covered” means the page leaves it out.
PageMain topicCapture framingTreatment of the Dental Prosthesis Manufacturing row
This page: stereo dental prosthesis fabrication dataThe Dental Prosthesis Manufacturing row onlyStereo pair, agreed in the skill spec; not stated on the rowThe whole page: scope, limits, streams and ordering
Egocentric dental prosthesis fabrication dataThe same row onlyFirst-person, head-mounted phone or multiview rig as the catalog lists itThe whole page; not stereo as its subject
Stereo dental lab and instrument reprocessing dataTwo rows: Dental Prosthesis Manufacturing and Surgical Instrument TechnicianStereo pair and MCAP deliveryOne of two rows, with the instrument row sharing the page
Egocentric dental lab and medical device workshop dataThe same two rowsFirst-person, as the catalog lists itOne of two rows; not stereo as its subject
Egocentric stereo data in MCAPThe stereo and MCAP hub across tasksStereo, delivered as MCAPNot covered; general treatment of the container and the rigs
Hard task data collectionEvery catalog row rated Hard, grouped by environmentAs each row lists itRow listed in the hub table with its status and capture setup

Stated vs not stated

What does the site state about stereo capture for this row?

Left to right: the item, what the site states, and what that means for an order. “Not stated” means the site does not say.
ItemWhat the site statesFor a dental prosthesis order
Catalog capture setupPhone (head-mounted) / multiview rigNo stereo pair is stated for this row; a stereo pair is a spec choice through the general stereo offer
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Hands, contacts and masksPer-joint visibility flag on hand pose; contact events; per-frame instance masks stored at 848×480Stated; what counts as the object is set in the spec
Hand occlusionThe hands occlude the work and fingers disappear behind objectsStated; how often the work leaves the view is Not stated
Depth on sub-centimetre parts and on wet or reflective surfacesMetric depth on sub-centimetre parts is flagged rather than interpolated; depth degrades on wet and reflective surfacesWhether a prosthesis part counts: Not stated
Gloved handsNot statedSettle in the spec and on a Spec Pilot
Calibration and synchronizationMeasured every session and shipped with the episode, 0.28 px RMS gate; one clock, 2.0 ms ceilingStated
Row statusAvailable on requestNo volume, hours or delivered stereo footage is claimed on this page
Face blurring and anonymizationFaces, plates and screens detected and irreversibly blurred at ingest; reviewer confirms; footage that cannot be de-identified is discardedStated; record ships with the data
Patient data, regulatory and certification statusNot stated for this environmentNot claimed; none is implied
Materials, equipment, cycle time, error rate, result qualityNot statedNot claimed; set in the spec

Stream map

Which streams map to an MCAP delivery for this row?

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Failure modes and QA

What goes wrong in prosthesis capture, and what does QA do about it?

Left to right: the failure mode, what the site states, and what a buyer sees. “Not stated” means the site does not say.
Failure modeWhat the site statesWhat a buyer sees
Fingers hidden behind the work or the toolPer-joint visibility flag on hand pose; wrist views and a multiview angle available in the specA hidden joint flagged as hidden, not guessed
Work out of framePer-frame instance masks; episode rejected when the object is out of frame for more than 15 percent of itReject log per batch; what the object is gets set in the spec
Two-handed fine motionThe catalog rates the row Hard; no frequency or error rate is statedSegment boundaries and contact events set in the spec
Reflective or wet surfacesDepth degrades on wet and reflective surfaces; which bench items count is Not statedConfidence maps ship with depth; Spec Pilot settles it
Invalid depth in the manipulation regionEpisode rejected when more than 35 percent of depth pixels are invalidReject log per batch
Bystander or paperwork in frameFaces, plates and screens blurred and reviewer-confirmed; undocumented bystander rejected; blurring of case paperwork Not statedReject log per batch; anonymization record ships with the data
Calibration driftSolved at the start and end of every session; 0.28 px RMS gateCalibration shipped with the episode
Sync breachRejected beyond the 2.0 ms ceiling for more than three consecutive framesReject log per batch
Spec mismatchRejected for a mismatch against the named skill specReject log per batch

Delivery and licensing

What is delivered, in which formats, and under what license?

Delivery and licensing terms as stated on this site. “Set per program” means the site states no fixed value.
ItemAs stated on this siteNote
FormatsMCAP, RLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd, or raw streams with metadataChosen in the skill spec; converter source ships with the data
LicensePerpetual, irrevocable, worldwide, buyer-owned, non-exclusive by defaultExclusivity is available as a separate term; the executed agreement controls
BillingPer validated hourRejected items are recaptured at our cost
PrivacyFaces, plates and screens blurred irreversibly; footage that cannot be de-identified is discardedAnonymization record delivered with the data
Timelinea median of 48 hours to first validated batch where coverage is deep; three to four weeks where thinWhich applies to this row is Not stated; quoted against your spec
Price, minimum order, batch sizeNot published for this rowSet in your quote

Skill spec

What does the skill spec fix for a stereo dental prosthesis order?

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Work productsWhich of crowns, dentures and dental appliances are in scopeWhat the cameras see; set per program, no per-product label is stated
Steps and orderWhat one step is and how steps are namedEpisode boundaries and action segments; set per program
Episode scopeOne stage, one work product or a longer runSet per program; the site does not state an episode length
Object definitionWhether the work product, a part or a tool counts as the objectContact events and the out-of-frame reject rule; set per program
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
MCAP topics and encodingWhat your reader expectsSet per program
People and privacyWhat may be in frame and how it is handledSettled before capture; faces, plates and screens blurred at ingest
Accept criteriaWhat counts as a finished step and what passes QAReject log per batch
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show dental prosthesis fabrication or any dental lab work.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a dental lab clip

No dental lab clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo dental prosthesis video, answered.

What is stereo dental prosthesis fabrication data?
Custom first-person video from two calibrated cameras of a paid, consented contributor fabricating crowns, dentures and dental appliances in a dental laboratory, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
One row, "Dental Prosthesis Manufacturing", in Dental Lab & Medical Device Workshop: "Fabricating crowns, dentures and dental appliances in a dental laboratory." It is rated Hard, lists a head-mounted phone or multiview rig, and is Available on request. This page claims no delivered hours.
Is stereo already captured on this row?
Not stated. The catalog lists a head-mounted phone with a multiview rig. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric page and the stereo dental lab page?
The egocentric page covers the same row as first-person video that is not stereo as its subject. The stereo dental lab and instrument reprocessing page covers this row together with Surgical Instrument Technician. This page is stereo capture of the prosthesis row alone.
Is there an off-the-shelf dental prosthesis dataset?
No. None of the site’s off-the-shelf dataset descriptions names dental prosthesis fabrication, so it is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
How fast can a custom dental lab dataset be collected?
From signed spec to first validated batch, a median of 48 hours where coverage is deep and three to four weeks where it is thin. The row is Available on request, so ask which applies when you request the quote.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.
Does the data include patient information or fit and finish labels?
No patient data is implied, and the site states no patient-data handling, regulatory status, or fit, finish, force or tactile label for this row. Faces, plates and screens are irreversibly blurred at ingest and a reviewer confirms the result.

Sources

Where is MCAP documented?

Request a custom stereo dental prosthesis fabrication dataset.

Tell us which of crowns, dentures and dental appliances are in scope, where each task starts and ends, whether an episode covers one stage or a longer run, the setting, the privacy rule for the bench, and the streams, MCAP topic expectations and format you want. We will quote reach, timeline and price against a written spec.