Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Task family

Egocentric Glass Etching and Glassblowing Data

Masking glass and revealing a design, or gathering molten glass on a pipe, blowing it, shaping it with tools and transferring it to anneal: these are slow, fragile, hands-and-tools tasks in a glass studio. This page covers egocentric glassblowing data, first-person glass etching video and a glass studio hand-skill dataset for the two catalog rows that name this work, collected as custom glass art data on demand against a spec you write. It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog rows
Two, in Glass & Mosaic Studio
Capture setup
Phone (head-mounted) / multiview rig, as the catalog lists
Status
Glass etching Medium and Glassblowing Hard, both Available on request
License
Perpetual, buyer-owned

Requirements

What does glass etching and glassblowing capture need?

01

Hands, tools and the piece in one close view

A head-mounted view keeps both hands, the pipe or the rotary tool, and the piece in frame while the glass is masked, etched, gathered or shaped.

02

Hand pose with visibility through the whole step

3D hand pose with a per-joint visibility flag records where the fingers are, and which joints were hidden, while a small piece is held close.

03

Two different task shapes on one scoped order

Etching is a masked, stepwise surface job. Glassblowing is a continuous sequence at the pipe. Both sit in one catalog environment, so one written spec can carry both, with each sequence defined and labelled separately.

04

Step boundaries on the same clock

Frame-accurate action segments mark where one step ends and the next begins, aligned to video and depth.

05

Rights you can ship on

A perpetual, buyer-owned commercial license backed by a documented consent chain, so a policy trained on the data can go into a product.

Why it matters

What is egocentric glass etching and glassblowing data, and why does it need its own page?

Egocentric glass etching and glassblowing data is real-world, first-person video of a person doing the work the catalog rows describe: masking the glass, applying etching cream or using a rotary tool and rinsing to reveal a design, and gathering molten glass on the pipe, blowing and shaping it with tools and transferring it to anneal. It is recorded from the worker viewpoint, with depth, 3D hand pose, contact events and frame-accurate action segments aligned on one hardware clock.

The work is a demanding test for a manipulation policy. Pieces are small, the steps are sequential and the hands do most of the work with tools that hide the fingers. A mask has to cover the right area before anything is applied, and a gathered piece has to be turned and shaped in order. Those are the situations where a close first-person view and hand pose help most.

The site already has an egocentric glass and mosaic page covering all four studio rows, and a stereo page for these same two rows. This page does something narrower: it treats glass etching and glassblowing as the subject of an egocentric order, so a team that needs egocentric glassblowing data, first-person glass etching video or a glass studio hand-skill dataset can scope exactly that work.

Catalog rows

Which catalog rows cover glass etching and glassblowing?

The site lists two rows in its Glass & Mosaic Studio environment, in the Creative Workshops & Crafts sector. "Glass etching" reads "Mask the glass, apply etching cream or use a rotary tool and rinse to reveal the design." and is rated Medium. "Glassblowing" reads "Gather molten glass on the pipe, blow and shape it with tools and transfer it to anneal." and is rated Hard.

Both rows list their capture mode as Phone (head-mounted) / multiview rig, and both are listed as Available on request. The environment lists its examples as "Glassblowing studio, stained glass, mosaic tiling, glass etching", and it holds two further rows, mosaic tiling and stained glass assembly, which this page does not claim.

The site names no tool, equipment model, glass type, thickness, temperature or etchant brand for these rows, so those details are agreed in the written spec.

Status

What does Available on request mean for these rows?

The site defines Available on request plainly: the work is scoped and recruited to spec when a buyer asks. It is not the same as Ready to deploy, where contributors and site access are already set up, and it is not Active collection, where recording is already running and a spec can join an existing stream.

That means recruitment comes first for a glass etching or glassblowing order, and the timeline is quoted against your spec. The site does not state a volume, a number of studios or a number of hours for either row, and none are claimed here.

The site lists no off-the-shelf glass dataset, so this work is custom collection.

Glass etching

What does the glass etching half involve?

The row describes a short chain: mask the glass, apply etching cream or use a rotary tool, and rinse to reveal the design. An episode can cover the whole chain or isolate one part of it, for example only the masking, or only the rinse.

The row offers two routes to the same result, etching cream or a rotary tool, and a spec can ask for one or both. The site gives no mask material, no cream or tool model, no design, no number of pieces per episode and no task time for this row. It also gives no chemical details and no handling instruction beyond the wording of the row, and this page adds none.

The site rates the row Medium. How a design is chosen, where the mask goes and where an episode begins and ends are agreed in the spec rather than assumed.

Glassblowing

What does the glassblowing half involve?

The row describes a longer sequence: gather molten glass on the pipe, blow and shape it with tools, and transfer it to anneal. The catalog rates it Hard, and it is the more demanding of the two rows.

The site states no temperatures, anneal times, glass types, tool models or piece sizes for this row. It also lists no thermal stream, so a glassblowing episode carries no temperature reading unless a spec sets one up. This page gives no instruction for working with hot glass beyond the wording of the row.

How the sequence is cut into episodes, what counts as a finished piece and how the transfer to anneal is framed are agreed in the written spec.

One order

Why capture glass etching and glassblowing together?

They share an environment, a capture mode and a status, and they share a setting: a glass studio where one person works one piece with hand tools. A buyer building a studio craft policy often wants both a surface skill and a shaping skill, and a single spec keeps the vocabulary, the accept criteria and the delivery format the same across them.

Keeping the two sequences separate matters just as much. Etching ends with a design revealed on a piece. Glassblowing ends with a shaped piece transferred to anneal. A spec can ask for them as two episode types, with action segments marking where each step starts and ends.

The site does not state that any episode combines the two, so how often each appears is set in the spec.

The first-person view

What does a first-person view add to glass work?

The site describes a head-mounted camera as keeping the hands and the work in frame from the viewpoint a manipulation policy acts from. For etching, that means the mask, the cream or rotary tool and the hands sit in the same view. For glassblowing it means the pipe, the gathered piece and the shaping tool do.

Pieces are small and are often hidden by the fingers that hold them. 3D hand pose is stated as 21 joints per hand with a per-joint visibility flag, which says which joints were seen and which were not rather than guessing silently. Contact and grasp events mark when a hand meets an item.

The site states that a head-mounted view is paired, when the spec asks for it, with synchronized third-person angles from a multiview rig, and with wrist cameras for closer detail on the hands. It states no working distance, field of view or resolution specific to these two rows.

Stereo

Is this data captured in stereo?

Not on the rows as listed. The catalog names a head-mounted phone or multiview rig as the capture mode for both, and this page is the egocentric page for these rows, not the stereo one. Stereo applies only through the site general stereo offer: a stereo pair is agreed in the skill spec and confirmed on a Spec Pilot. This page claims no delivered stereo footage of glass etching or glassblowing.

If you want a calibrated stereo pair, depth from a stereo rig and a container such as MCAP for this work, the stereo glass etching and glassblowing page describes that framing. If a head-mounted phone or a multiview rig is enough, this page describes that capture directly.

The site does not state a depth accuracy figure for these rows either way, and a policy that needs one should ask for it in the spec.

Hard cases

What goes wrong when you record glass up close?

Hands are the first risk. Pieces are small and are often hidden by the fingers that hold them, and a pipe or tool can hide the part being worked. The visibility flag on each joint is the answer the site gives, contact events mark when a hand meets an item, and masks are recorded per frame.

Surfaces are the second. The site states that wet and reflective surfaces degrade active-stereo depth and that depth confidence maps mask low-confidence regions. How a transparent or reflective piece behaves in depth is not stated, and an etching order in particular should expect that and check it on a Spec Pilot.

Heat is the third. The site notes that no thermal stream is listed, which matters for a row that works with molten glass, and force and tactile readings are not among the listed streams either. A spec that needs any of them has to set them up.

Capture setup

What does the capture setup look like, and what is not stated?

The catalog lists one capture mode for both rows: a head-mounted phone with a multiview rig. That is a first-person view of real work, with a multiview rig adding synchronized third-person angles when the spec asks for them, and wrist cameras giving a closer view of the hands.

The site also states that Firsthand does not capture at a customer facility, and it does not say which glass studio a given program uses. The studio and the contributors are agreed in the skill spec before capture begins.

The site describes a hard-environments stack with a 4K/60 head camera and a 120° lens, and does not say whether a glass order uses it. The capture table below sets what is stated beside what is not.

Streams and labels

What does each episode contain?

Each attempt is delivered as one episode, following the episode schema used across Firsthand custom collections: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events and frame-accurate action segments. Each episode carries one task instruction, and per-frame instance masks are stored at the depth resolution of 848×480.

Action segments divide an episode into start- and end-timestamped spans, each carrying start_ns, end_ns, verb and noun. For this work, a segment might be one etch, as written in the skill spec. The site lists no label for the outcome of a step, such as whether a design came out clean.

Object labels use the terms your spec sets, so labels follow the vocabulary your training stack expects rather than a generic taxonomy.

Neighbouring pages

How is this different from the glass and mosaic, stereo etching and glassblowing and glass manufacturing pages?

The egocentric glass and mosaic page covers all four studio rows as first-person craft video, including mosaic tiling and stained glass assembly. Glass etching and glassblowing are two of its four rows, not its subject, and this page takes them as the subject.

The stereo glass etching and glassblowing page covers the same two rows with a stereo and MCAP framing. This page is the egocentric version, built on the catalog capture mode of a head-mounted phone or multiview rig. The stereo glass cutting and forming page covers five glass rows across two environments, and the egocentric glass manufacturing page covers the one heavy industry row.

None of the egocentric pages makes etching and glassblowing its main topic. The comparison table below sets each against this page.

Privacy

How is contributor privacy handled?

Every contributor signs a written release before capture, and each delivered episode links to that record through a documented consent chain. Contributors are paid and consented, and footage that cannot be de-identified is discarded rather than shipped.

At ingest, automated detection finds faces, plates and screens and blurs them irreversibly, and a reviewer confirms the result before anything ships. The anonymization record is delivered with the data.

Whether finished pieces or original designs are blurred or protected beyond the license is not stated. Safety certifications, protective equipment and injury handling for glass work are not stated either, and this page makes no such claim. None of this is legal advice, and the executed agreement controls.

Delivery

How is the data labeled and delivered?

Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd, and a custom order can be packaged as MCAP. The first three are training-loader formats, HDF5 and zarr carry arrays for custom pipelines, and Rerun .rrd gives a multi-stream synchronized playback file for review. The format table below sets each against its official documentation where it was read.

MCAP is a container for timestamped log data, not a training format. If your training loop expects RLDS, LeRobot or WebDataset, name that format in the spec. The site does not state which streams of a glass order map to MCAP channels, so topic names, encoding and rates are agreed in the spec.

Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch.

Fast · on demand · at scale

How fast can a custom glass etching and glassblowing dataset be collected?

Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that timeline up front. Both rows are Available on request, so recruitment comes first and the range that applies is confirmed when the spec is quoted.

On-demand top-ups run against the same spec and accept criteria after each training run, so new data stays consistent with what you already hold. The site does not state a batch size or a later-batch turnaround, so those are quoted against your spec.

This is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The site states no provider counts, hours or throughput for this task, and none are claimed here.

The spec

How do you start a pilot?

You describe the etching and glassblowing sequences your policy needs. We turn that into a written spec covering tasks, environments, capture tier, annotation depth and accept criteria, then quote reach, timeline and price against that document before any capture begins.

A Spec Pilot, a small and fast first batch, can prove the spec, the views and the accept criteria before you scale volume. The collection runs through the same seven-stage end-to-end custom collection pipeline as every Firsthand program: contributor recruiting, capture, per-batch QA, anonymization and licensed delivery. Billing is per validated hour, a reject log ships with every batch, and rejected items are recaptured at our cost.

At a glance

What you get.

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

What the site states

What does the site state about glass etching and glassblowing?

Where the work appears on this site, what each place states and how this page uses it.
Where it appearsWhat the site statesUsed on this page as
Task catalog, Glass & Mosaic StudioTwo rows: glass etching (Medium) and glassblowing (Hard), both Available on requestThe stated tasks
Environment examplesGlassblowing studio, stained glass, mosaic tiling, glass etchingContext for the setting
Task catalog, same environmentTwo further rows: mosaic tiling and stained glass assemblyNeighbouring work, not claimed here
Task catalog, capture modePhone (head-mounted) / multiview rig for both rowsThe egocentric capture setup
General stereo offerA stereo pair is agreed in the skill spec and confirmed on a Spec PilotHow stereo would apply; not stated on the rows
Task catalogNo temperature, anneal time, glass type, tool model or success rate is statedNot stated; scoped in the written spec

Catalog rows

Which two catalog rows does this page cover?

The two rows exactly as listed in the Glass & Mosaic Studio environment, with the catalog description, skill rating, capture mode and status.
Task familyCatalog task and descriptionSkillCapture modeStatus
EtchingGlass etching: mask the glass, apply etching cream or use a rotary tool and rinse to reveal the designMediumPhone (head-mounted) / multiview rigAvailable on request
Hot glassGlassblowing: gather molten glass on the pipe, blow and shape it with tools and transfer it to annealHardPhone (head-mounted) / multiview rigAvailable on request

Capture setup

How is this work recorded?

The capture mode named in the catalog for the two rows, and what the site states about each element.
Capture modeWhat the site says it recordsWhere it applies
Phone (head-mounted) / multiview rigA head-mounted phone records the first-person view of real work; a multiview rig adds synchronized third-person angles when the spec asks for themBoth catalog rows
Head-mounted cameraKeeps the hands, the piece and the tool in frame from the viewpoint a manipulation policy acts fromAll episodes
Wrist-mounted cameraAvailable alongside the head camera for close-range detailStated as an option; per-task use set in the spec
Stereo pairApplies only through the site general stereo offer: agreed in the skill spec and confirmed on a Spec PilotNot stated on the rows
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether a glass order uses it: not stated
Customer facilityCapture at a customer facility is not offeredStudio and contributors agreed in the spec

Streams and labels

What does each episode carry, and what is not stated?

Streams and labels the site states for Firsthand custom collections, and fields the site does not state for these rows.
ItemStatus on this siteWhy it matters here
Head and wrist RGB, depthStated; ten streams synced under 2 msKeeps the piece, the tool and the hands on one timeline
3D hand pose with per-joint visibilityStated; 21 joints per handCarries the grip on a pipe, a rotary tool or a shaping tool
Contact and grasp eventsStatedMarks when the fingers make and break contact with an item
Per-frame instance masksStated; stored at 848×480Separates the piece from the pipe, the tool and the bench
Action segmentsStated; frame-accurate, with start_ns, end_ns, verb and nounMarks masking, etching, rinsing, gathering and shaping as separate steps
Task instructionStated; one per episodeNames the sequence the episode shows
Thermal stream, force or tactile dataNot listedDefined in the spec if the policy needs them
Temperatures, anneal times, glass types, tool modelsNot statedDefined in the spec
Task-completion label, success rateNot statedNo such claim is made on this page

Formats

Which formats carry this data?

Delivery formats stated on the site, set against what each format official documentation states where the documentation was read.
FormatWhat the official documentation statesUsed for here
RLDSA dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README)Episode-based training loaders
LeRobotLeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation)LeRobot dataset format and tooling
WebDatasetTar files in which files that belong together share a basename, split into numbered shards (WebDataset README)Sharded streaming for large training runs
MCAPAn open source container for multimodal log data with multiple channels of timestamped pre-serialized data (mcap.dev)Multi-stream timestamped delivery on a custom order, with layout set in the spec
HDF5 and zarrStated by Firsthand onlyArray storage for custom pipelines
Rerun .rrdStated by Firsthand onlyMulti-stream synchronized playback for review

Related pages

How is this page different from the neighbouring glass pages?

Related collection pages on this site and how their main topic differs from this one.
PageMain topicHow this page differs
Egocentric glass etching and glassblowing data (this page)The two Glass & Mosaic Studio rows for glass etching and glassblowing, in first-person captureCentres on both tasks together, egocentric
Egocentric glass and mosaic craft video dataAll four Glass & Mosaic Studio rows in first-person captureMosaic tiling and stained glass are in scope there; here only etching and glassblowing
Stereo glass etching and glassblowing dataThe same two rows, with stereo and MCAP framingStereo and container framing; this page is the egocentric version
Stereo glass cutting and forming dataFive glass rows across Heavy Industry & Fabrication and the studio, with stereo and MCAP framingGlass handling is its subject; this page covers etching and glassblowing only
Egocentric glass manufacturing dataThe one Glass manufacturing row in first-person captureIndustrial glass work, not studio etching or glassblowing
Stereo window and glass cleaning dataCleaning interior and exterior glass with applicators and squeegeesA cleaning row, not etching or shaping

Skill spec

What the skill spec fixes for this order

Spec element and where a buyer can see it in the delivery. Set per program means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Tasks and orderWhether an episode is etching, glassblowing or both, and where each starts and endsEpisode boundaries and action segments; set per program
Pieces and toolsWhich pieces are etched or blown and which tools are in scopeObject labels; set per program
Views and streamsHead and wrist views, a second angle, hand pose and any othersThe channels you can read; confirm on the Spec Pilot
Reflective and clear piecesWhether transparent or reflective pieces are in scope and how depth is checkedSpec Pilot result; set per program
Step labelsWhether mask, etch, rinse, gather and shape are separate labelled stepsAction segments; set per program
Delivery formatHow the data is packagedRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or MCAP
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people, plates and screens in frame are protectedFaces, plates and screens blurred at ingest
LicenseWho owns the datasetPerpetual, buyer-owned commercial license; exclusivity available

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show glass etching or glassblowing.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a glass etching or glassblowing clip

No glass etching or glassblowing clip is published on the site, so this is the nearest first-person clip, labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric glassblowing data, answered.

What is egocentric glass etching and glassblowing data?
It is first-person video of a person etching glass and gathering, blowing and shaping molten glass. The catalog rows name a head-mounted phone or multiview rig as the capture mode. Firsthand collects it to a written spec, with depth, 3D hand pose and action segments.
Which catalog rows cover it, and what is their status?
Two rows in Glass & Mosaic Studio: Glass etching (Medium) and Glassblowing (Hard). Both are Available on request, with a head-mounted phone or multiview rig as the capture mode.
Is the data captured in stereo?
Not on the rows as listed. Stereo applies only through the site general stereo offer, agreed in the skill spec and confirmed on a Spec Pilot, and this page claims no delivered stereo footage of these tasks. The stereo page for these rows covers that framing.
Does the data include temperature or force readings?
Not stated. The site lists no thermal stream and no force or tactile stream, so any such reading would have to be set up in the spec. The site also states no temperatures or anneal times for the glassblowing row.
How is this different from the glass and mosaic and stereo etching pages?
The glass and mosaic page covers all four studio rows in first-person capture, and the stereo page covers these same two rows with stereo and MCAP framing. This page centres on glass etching and glassblowing in egocentric capture.
How fast can a custom dataset be collected?
Where coverage is deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, and both rows are Available on request, so recruitment comes first and a Spec Pilot can prove the spec.
How is contributor privacy handled?
Every contributor signs a written release, and each episode links to that record through a documented consent chain. Faces, plates and screens are blurred at ingest and a reviewer confirms the result before anything ships.
What license does the data ship under?
A perpetual, buyer-owned commercial license, with exclusivity available, documented alongside the consent chain.

Sources

Where are the delivery formats documented?

Request a custom glass etching and glassblowing dataset.

Tell us the pieces and tools, whether an episode is etching, glassblowing or both, whether clear or reflective pieces are in scope, the views and streams you want and the format you train on. We will quote reach, timeline and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.