Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Egocentric Stained Glass Assembly Data

Cutting glass pieces to a pattern, fitting them with lead came or copper foil and soldering the joints is slow, close-range work on small, fragile pieces, and the fingers cover much of it. This page covers one catalog row: what it states, how the head-mounted phone and multiview rig capture it, what each episode carries and what the site does not state. We collect it as custom craft data on demand, to a written skill spec, with the row status stated exactly as the catalog lists it.
Catalog row
Stained glass assembly, in Glass & Mosaic Studio
Skill and status
Hard; Available on request
Capture
Phone (head-mounted) / multiview rig
License
Perpetual, buyer-owned

Requirements

What does a stained glass assembly capture need that a general craft clip does not?

01

One catalog row, three stages in order

Cut glass pieces to pattern, fit lead came or copper foil and solder the joints, as the catalog words the row.

02

Hands, tools and small pieces in view together

Hand pose, contact events and per-frame instance masks are recorded on one clock, with a visibility flag on each joint.

03

Written accept criteria before capture

What counts as a cut piece, a fitted piece or a soldered joint is written into the spec up front.

04

Privacy stated plainly

Consent, anonymization and the license are stated below. This page makes no safety claim and gives no instructions.

Definition

What is egocentric stained glass assembly data?

Egocentric stained glass assembly data is first-person video of a person doing the work named in one catalog row: cutting glass pieces to pattern, fitting lead came or copper foil and soldering the joints. It is recorded from the contributor’s own point of view, with synchronized sensor streams alongside, so the frames show what the hands are doing to the pieces rather than a distant view of a studio. Searchers also phrase it as egocentric stained glass data, first-person glass cutting and came fitting video or a copper foil soldering dataset. The data is the same, collected as a custom craft data collection scoped to your task.

On this site the data is human capture: a paid, consented contributor wears the rig and performs the task from a written skill spec. It is not robot or teleoperation data. This page is narrower than the egocentric glass and mosaic page, which covers four studio rows, and than the stereo glass cutting and forming page, which covers five glass rows. Here the single subject is the stained glass assembly row.

Catalog row

Which catalog row covers stained glass assembly, and what does it say?

One row, in the Glass & Mosaic Studio environment under the Creative Workshops & Crafts sector. The catalog states it as "Stained glass assembly": "Cut glass pieces to pattern, fit lead came or copper foil and solder the joints." The skill is Hard, the capture is Phone (head-mounted) / multiview rig and the status is Available on request. The environment’s example line reads "Glassblowing studio, stained glass, mosaic tiling, glass etching". The first table below reproduces the row exactly.

Available on request means the work is scoped and recruited to spec when a buyer asks. It does not mean a stock of stained glass footage exists, and this page claims no volume, hours or delivered clips for the row. Glass cutting is not its own row: cutting appears inside this row and inside mosaic tiling. Scoring, breaking and grinding are named in none of the glass studio rows, so if your program needs one of them, it is written into the skill spec rather than assumed.

Why it is hard

Why is stained glass assembly listed as Hard?

The site’s answer is the Skill column. The catalog rates the row Hard, and that is all "Hard" means here. This page imports no outside rubric and states no failure rate, tolerance or claim about how skilled any worker is. What the site does say is in the row text: three stages in sequence on small, fragile material. Pieces are cut to a pattern, fitted with lead came or copper foil, and the joints are soldered. The catalog describes glass studio steps in general as small, sequential and unforgiving.

The site’s glass and mosaic copy adds that pieces are small and are often hidden by the fingers that hold them. That is why hand pose carries a per-joint visibility flag, why contact events mark when a hand meets an item and why masks are recorded per frame. The challenge table below maps each difficulty to the stream or label the site already states, and says Not stated where nothing is.

Capture

How is stained glass assembly captured?

The catalog lists one capture mode for the row: a head-mounted phone with a multiview rig. That is a first-person view of real work, with a multiview rig adding synchronized third-person angles when the spec asks for them. The site also describes the wider egocentric rig: ten synchronized streams (4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation and action labels), hardware-triggered onto one PTP clock domain and aligned under 2 ms. Which tier applies to a given stained glass program is not stated and is confirmed in the skill spec.

This page does not describe the row as stereo capture. Stereo is a separate offer on this site, agreed in a spec and confirmed on a Spec Pilot, and the stereo glass cutting and forming page covers it for the glass rows. Force, tactile and thermal readings are not among the listed streams, which matters for a row that ends with soldering the joints.

Episodes

What does each episode contain?

Each attempt is delivered as one episode. The standard episode carries action segments, 3D hand pose for both hands with a per-joint visibility flag, contact events that mark when a hand meets an item, an objects list, and per-frame instance masks stored at the depth resolution of 848×480. Hand pose is 21 joints per hand, 3D, in metres in the head-camera frame. For stained glass assembly an episode might cover one piece cut, one piece fitted or one joint soldered, or a longer run; where each episode starts and ends is written into the spec.

Action segments divide an episode into start- and end-timestamped spans, each carrying start_ns, end_ns, verb and noun. The site lists no label for the outcome of a step, such as whether a cut was clean or a joint was sound, so ask for any such label in the spec.

Validation

How is the data validated and accepted?

Validation runs against signed accept criteria written into the spec before capture, and a reject log ships with each batch. Episodes are machine-checked against stated reject criteria, such as a sync breach or the manipulated object out of frame for more than 15 percent of the episode, and a human reviewer then checks each one. Only footage that clears the criteria is billed as a validated hour. For this row, what counts as a cut piece, a fitted piece or a soldered joint is something the spec writes down, because the site states no outcome definition for it.

Delivery and license

Which formats and license apply?

Delivery is in the format your stack already reads: RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata, with readable converter source alongside. The license is perpetual, irrevocable and worldwide, buyer-owned and non-exclusive by default, with exclusivity available as a separate term. The executed agreement controls.

Official documentation for the RLDS, LeRobot and WebDataset formats is linked in the sources below. MCAP delivery is a separate offer described on the egocentric stereo MCAP page, and nothing on this page promises an MCAP file for this row.

Neighbouring pages

How does this page differ from the other glass and soldering pages?

Four neighbouring pages touch the same materials, and none has stained glass assembly as its main topic. The glass and mosaic page covers all four studio rows, so stained glass is one of four there. The stereo glass cutting and forming page covers five glass rows, including the heavy industry glass manufacturing row. The glass etching and glassblowing page covers the two etching and molten glass rows. The comparison table below sets each against this page.

The soldering pages cover electronics soldering and jewelry bench soldering. The site’s existing copy notes that the stained glass row mentions soldering joints but is not an electronics soldering row, so this page keeps the one row and its three stages in focus.

Capture and privacy

How are contributors and their work protected?

Every contributor signs a written release, and each delivered episode links to it through consent artefact IDs. At ingest, automated detection finds faces, plates and screens and blurs them irreversibly, and speech is scrubbed of names, addresses and card numbers. A human reviewer confirms that no un-consented person is identifiable in any frame, and the anonymization record ships with the data. Firsthand does not capture at a customer’s own facility, and which glass studio a program uses is agreed in the skill spec before capture begins.

Whether a contributor’s finished panels or original designs are blurred or protected beyond the license is not stated. Neither are safety certifications, protective equipment or fume handling, and this page makes no safety claim and gives no instructions for any step.

Speed and scale

How fast and at what scale can a custom stained glass dataset be collected?

From signed spec to first validated batch, the published timeline is a median of 48 hours where coverage is deep and three to four weeks where it is thin and contributors need to be recruited first. The row is Available on request, so the range that applies is confirmed when the spec is quoted rather than assumed.

Stained glass assembly is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The site states no provider count, hours or throughput for this row, and it does not state stained glass as part of the off-the-shelf catalog, so treat it as a custom collection.

Getting started

How do you start a pilot?

Describe the bench tasks and their order, the pieces and materials involved, what counts as a finished step and the failure or variation cases your pipeline is missing. That becomes a written skill spec, quoted for reach, timeline and price before any capture begins. Our skill spec guide walks through how to write one.

Most programs begin with a Spec Pilot, a small, fast first batch that proves the spec and the accept criteria on real footage before volume scales. Collections are billed per validated hour. Counts of sites, episodes and hours are set in the skill spec.

Capture setup

What is the capture setup for stained glass assembly?

The capture setup as stated on this site. Counts of sites, contributors, episodes and hours are set in the skill spec.
PartAs stated on this site
Capture mode (this row)Phone (head-mounted) / multiview rig, as the catalog lists it
Multiview rigAdds synchronized third-person angles when the spec asks for them
StreamsTen: 4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation, action labels
SyncHardware-triggered onto one PTP clock domain; aligned under 2 ms
Hand pose21 joints per hand, 3D, in metres in the head-camera frame; per-joint visibility flag
StereoNot stated for this row; a separate offer, agreed in the skill spec and confirmed on a Spec Pilot
Which tier applies to a given programNot stated; confirmed in the skill spec

Every collection runs through the same seven-stage end-to-end custom collection pipeline.

Live catalog row

Stated row × description × skill × capture × status

The Stained glass assembly row as the task catalog states it, reproduced without change.
TaskDescriptionEnvironmentSkillCaptureStatus
Stained glass assemblyCut glass pieces to pattern, fit lead came or copper foil and solder the joints.Glass & Mosaic StudioHardPhone (head-mounted) / multiview rigAvailable on request

Neighbouring pages

Page × main topic × where stained glass appears

How the nearest glass and soldering pages differ from this one. Only what each page states is listed.
PageMain topicWhere stained glass assembly appears
This pageThe single Stained glass assembly row, egocentricThe whole page
Egocentric glass and mosaic dataFour Glass & Mosaic Studio rows: glass etching, glassblowing, mosaic tiling, stained glass assemblyOne of four rows
Stereo glass cutting and forming dataFive glass rows, including heavy industry glass manufacturing, with the stereo and MCAP sideOne of five rows
Egocentric glass etching and glassblowing dataThe glass etching and glassblowing rowsNot covered
Egocentric soldering and PCB rework dataElectronics solderingThe stained glass row is noted as mentioning soldering joints but is not an electronics row
Egocentric jewelry soldering and polishing dataJewelry bench soldering, polishing and wire wrapping rowsNot covered

Capture challenges

Craft challenge × what goes wrong × stated stream or label

Each stained glass capture challenge mapped to a stream or label this site already states. Where nothing is stated, the row says so.
Craft challengeWhat goes wrongStated stream or label
Small pieces hidden by the handFingers cover the glass piece, came, foil or tool being held3D hand pose with per-joint visibility flags; per-frame instance masks; reject if the object is out of frame for more than 15% of an episode
Hand meets piece or toolThe hand, tool and piece touch in quick successionContact events mark when a hand meets an item; no finer contact label is stated
Cutting pieces to patternA cut is quick and cannot be undoneAction segments with verb and noun; not stated: no label for whether a cut succeeded
Fitting lead came or copper foilFitted pieces are small and partly covered by the fingersInstance masks and hand pose; not stated: no label for whether a piece is fitted correctly
Soldering the jointsThe joint is a small detail under the hand and toolAction segments and contact events; not stated: no thermal stream and no joint outcome label
Clear or reflective surfacesA clear piece can be hard to tell from the bench or from reflectionsNot stated: depth and instance masks are listed generally; nothing is listed specifically for transparent or reflective surfaces
Grip and pressing forceHow hard a piece is gripped or pressedNot stated: no force or tactile stream is listed

Delivered vs not stated

What is delivered and what is not stated

Delivered items are stated elsewhere on this site. Items marked not stated are not promised on this page.
ItemStatusDetail
Action segmentsDeliveredstart_ns, end_ns, verb, noun, one per step
3D hand poseDelivered21 joints per hand; per-joint visibility flag for occluded fingers
Contact eventsDeliveredThe moment a hand meets an item
Per-frame instance masksDeliveredStored at 848×480
Consent and anonymization recordsDeliveredConsent artefact IDs per episode; anonymization record shipped with the data
FormatsDeliveredRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or raw streams with metadata
Tools, equipment, glass types and thicknessesNot statedAgreed in the skill spec
Studio types and sizesNot statedAgreed in the skill spec
Cycle times and throughputNot statedNo such figure is listed
Number of sites, episodes and hoursNot statedSet per program in the skill spec
Quality, breakage or joint outcome labelsNot statedNo such label is listed
Force, tactile or thermal readingsNot statedNot among the listed streams
Safety certifications and protective equipmentNot statedNo such statement exists for this environment

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show stained glass assembly or any glass work.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a stained glass clip

No stained glass clip is published on the site, so this is the nearest first-person clip, labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric stained glass assembly data, answered.

What is egocentric stained glass assembly data?
Custom first-person video of a paid, consented contributor cutting glass pieces to pattern, fitting lead came or copper foil and soldering the joints, captured to a written skill spec.
Which catalog row covers it, and what is its status?
One row, "Stained glass assembly", in Glass & Mosaic Studio: "Cut glass pieces to pattern, fit lead came or copper foil and solder the joints." It is rated Hard and its status is Available on request. This page claims no volume, hours or delivered clips.
Is it captured with a head-mounted phone or in stereo?
The catalog lists Phone (head-mounted) / multiview rig for the row. Stereo is not stated for it; it is a separate offer agreed in the skill spec and confirmed on a Spec Pilot.
Does the data include cut quality or joint quality labels?
Not stated. The site lists action segments, hand pose, contact events and instance masks, and no label for whether a cut, a fitted piece or a soldered joint was good. Ask for any such label in the spec.
Is there an off-the-shelf stained glass dataset?
Not stated. Stained glass assembly is a custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Will faces or screens be visible?
Faces, plates and screens are blurred irreversibly at ingest, and a human reviewer confirms that no un-consented person is identifiable. Whether finished panels or designs are protected beyond the license is not stated.
Who owns the data and in which formats does it arrive?
The buyer owns it under a perpetual, non-exclusive commercial license by default. Formats include RLDS, LeRobot, WebDataset, HDF5, zarr and Rerun .rrd.
How fast can a fast, on-demand stained glass dataset arrive?
A median of a median of 48 hours from signed spec to first validated batch where coverage is deep, and three to four weeks where it is thin. The row is Available on request, so the range is confirmed when the spec is quoted.

Sources

Where are the delivery formats documented?

Request a custom stained glass assembly dataset.

Tell us the steps and where each starts and ends, the pieces and materials you expect to see, whether an episode covers one piece, one joint or a whole panel, and the angles you want beyond the head-mounted view. We will quote reach, timeline and price against a written spec.