Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Task family

Egocentric Physiotherapy Balance Training and Rehab Equipment Data

A person sets up balance boards and supports and guides a patient through balance exercises, or sets up and adjusts a rehab machine and guides a patient’s use of it: two catalog rows where hands, a body and a piece of equipment share one close view. This page covers egocentric balance training data, first-person rehab equipment setup video and a physiotherapy clinic equipment dataset, collected as custom rehabilitation data on demand against a spec you write.
Catalog rows
Balance training and Rehabilitation equipment operation, in Physiotherapy & Rehabilitation Clinic
Capture setup
Phone (head-mounted) / multiview rig, as the catalog lists
Status
Both Available on request; both Medium
License
Perpetual, buyer-owned

Requirements

What does balance training and rehab equipment capture need?

01

Both hands, the equipment and the patient in one view

A head-mounted view keeps both hands, the board, support or machine being handled and the patient in one view while the set-up is arranged, the equipment is adjusted and the patient is guided.

02

Hand pose with visibility through the whole step

3D hand pose with a per-joint visibility flag records where the fingers are, and which joints were hidden, while a support is placed or a machine is adjusted.

03

Step boundaries on the same clock

Frame-accurate action segments mark where a set-up ends, an adjustment is made and guidance begins, aligned to video and depth.

04

A scene boundary stated before capture

Healthcare capture on this site uses simulated patients only and never real patient footage. Who stands in for the patient is agreed in the written spec.

05

Rights you can ship on

A perpetual, buyer-owned commercial license backed by a documented consent chain.

Why it matters

What is egocentric balance training and rehab equipment data, and why does it need its own page?

Egocentric balance training and rehab equipment data is real-world, first-person video of equipment-centred work in a physiotherapy clinic. It is recorded from the worker viewpoint, with depth, 3D hand pose, contact events and frame-accurate action segments aligned on one hardware clock. It covers two tasks the site states in its task catalog: Balance training and Rehabilitation equipment operation.

The nearest existing pages each cover part of this ground. The egocentric physiotherapy stretching and exercise guidance page counts Balance training as one of three rows and does not cover Rehabilitation equipment operation. The patient mobility assistance page counts Balance training as one of five mobility rows and states that it does not count Rehabilitation equipment operation. This page is the one that puts both equipment rows together, so a team that needs egocentric balance training data, first-person rehab equipment setup video or a physiotherapy clinic equipment dataset can scope exactly those tasks. It is custom rehabilitation data collection, fast and on demand, written to your spec.

The data is human capture. A paid, consented contributor performs the task while a rig records it. It is not robot or teleoperation data, it is not simulation data, and it is not a fixed corpus you download. It is also not clinical data: the site states no diagnosis, treatment plan, outcome measure or medical record for these rows, and nothing here should be read as guidance on how to treat or handle a person.

Catalog rows

Which catalog rows does this page cover?

The site lists them in a Physiotherapy & Rehabilitation Clinic environment under the Healthcare & Life Sciences sector. The rows are Balance training ("Set up balance boards and supports and guide a patient through balance exercises.", Medium) and Rehabilitation equipment operation ("Set up and adjust rehab machines and guide a patient’s use of them.", Medium).

Both list the capture setup "Phone (head-mounted) / multiview rig" and the status Available on request, which the site defines as scoped and recruited to spec when a buyer asks for it, rather than already set up and recording. The environment lists its examples as physiotherapy clinic, rehabilitation center, sports medicine facility, and names assisted stretching, therapeutic exercise, mobility support, balance training and rehabilitation equipment operation. The first table below reproduces the two rows as the catalog states them.

Balance training

How is the Balance training row described?

The catalog row reads "Set up balance boards and supports and guide a patient through balance exercises." It has two parts: arranging boards and supports, then guiding a patient through balance exercises. It is rated Medium. The first part is object handling and the second is hands-on guidance, so one row holds both.

Board types, support types, the exercises used and the way a patient is steadied are Not stated. This page makes no claim about them and gives no balance or handling guidance. They are set in the written spec.

Rehabilitation equipment operation

How is the Rehabilitation equipment operation row described?

The catalog row reads "Set up and adjust rehab machines and guide a patient’s use of them." It has three parts: setting up a machine, adjusting it, and guiding a patient’s use of it. It is rated Medium. Of the two rows, it is the one the other physiotherapy pages leave out.

The site names rehab machines and nothing narrower. Which machines, what is adjusted on each, what values it is adjusted to and how a patient is guided on them are Not stated, and no brand or model is named. This page lists no settings and gives no operating guidance. Those details, if a task needs them, are set in the written spec.

Compared with neighbouring pages

How does this page differ from the other physiotherapy and mobility pages?

Three neighbouring pages exist, and they are not the same topic. The egocentric physiotherapy stretching and exercise guidance page covers Assisted stretching, Therapeutic exercise guidance and Balance training. The stereo version of that page covers the two stretching and exercise guidance rows with a calibrated stereo pair and MCAP delivery. The patient mobility assistance page covers five mobility rows across three environments.

This page is the narrow view for teams scoping balance set-up and rehab equipment work in a physiotherapy clinic. The second table below sets the three against this page. Where a team also needs stretching or exercise guidance, the egocentric stretching page is the better starting point; where it needs standing, walking, transfer or a mobility-aid handover, start with the patient mobility assistance page. The site does not publish a separate physiotherapy clinic set-up page, so none is compared here.

Capture setup

Is this stereo capture, and how is clinic work captured?

Not as the site states it. The catalog lists "Phone (head-mounted) / multiview rig" for both rows and states no stereo pair for them. The site does offer a stereo pair through its general stereo offer, so stereo is a capture choice agreed in the written spec and proved on a Spec Pilot, not something these rows already run.

A head-mounted phone records the first-person view of real work on site, and a multiview rig adds synchronized third-person angles when the spec asks for them. The site states a head camera at 3840 × 2160 and 60 fps for its instrumented rig, but no camera count, resolution or frame rate for these rows, so the capture tier is agreed in the spec. Throughput is Not stated and is quoted against your spec.

Why it is hard

Why are balance set-ups and equipment adjustments hard to capture?

These rows put a hand on a board, a support or a machine while a second person is nearby. The site does not state how often equipment or a hand leaves the view in a clinic, so this page makes no claim about it. What the site does state is what egocentric video puts into the training distribution: hands entering the frame from below, occlusion during grasp and motion blur during reach.

The site also states why a hand pose stream matters here. RGB alone leaves a model to infer 3D hand structure it cannot see reliably through occlusion and motion blur. Firsthand delivers 3D hand pose as handJoints[2][21][3] in metric units in the head-camera frame, with a visibility flag per joint, aligned to depth and RGB. Two hands of 21 joints each are tracked per frame, and the flag records which of them were hidden.

Streams and labels

What does each balance and equipment episode contain?

Each episode follows the Firsthand episode schema: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events, and frame-accurate action segments. For these rows, hand pose tracks how the fingers hold a board, a support or a machine control, contact events mark when a hand meets the equipment or the patient, and action segments mark each step, such as a set-up, an adjustment and the guidance that follows.

The only language data the site ties to Firsthand capture is one task instruction per episode. Object labels use the terms your spec sets. The site states hand pose for the wearer’s hands, and states no pose stream for the patient’s body and none for the equipment. Force or tactile data, machine readouts, and success or quality labels for a balance session or an adjustment are Not stated for these rows, and this page does not offer them as deliverables.

Gloves

Can tactile gloves be used for balance training and rehab equipment work?

The site offers a tactile glove tier as a pilot-ready option. The gloves track the hands, the glove signal is time-synced to a head-mounted stereo camera by hardware timestamps and an IMU, each glove is calibrated every session, and the pipeline checks signal dropout and sync drift.

The site does not state that the glove tier has been used on any physiotherapy row, and it does not state whether gloves suit work with a patient or with rehab machines. Treat force and tactile data as Not stated for these rows unless a spec adds the glove tier and agrees the fit with you. The tactile glove page covers the tier in full.

Setting and privacy

Who appears in the footage and how are bystanders protected?

The catalog places both rows in the Physiotherapy & Rehabilitation Clinic environment. The site states that capture in healthcare settings happens only in training environments with simulated patients, and that real patient footage is never captured, under any circumstance, regardless of what a spec requests. Who plays the patient is agreed in the written spec before capture begins.

Every episode links to a signed contributor release through a documented consent chain. Faces, plates and screens are detected and irreversibly blurred at ingest, a reviewer confirms the result before anything ships, and the anonymization record is delivered with the data. An undocumented bystander is also a stated reject criterion. The site names no clinic, city or practitioner, and states no further privacy rule specific to physiotherapy.

Quality gates

How are episodes checked for lost views?

Episodes are machine-checked at ingest against the stated reject criteria, which include an object out of frame for more than 15 percent of the episode, more than 35 percent invalid depth pixels in the manipulation region, a sync breach beyond the ceiling for more than three consecutive frames, calibration drift beyond tolerance, an undocumented bystander and a mismatch against the named skill spec. A human reviewer then checks the result.

The site states these for every episode, so they apply to balance training and rehab equipment work alike. It does not state how often equipment leaves the view in a clinic, and it states no blur or sharpness rule. A rejected item goes to the reject log and is recaptured at our cost.

Delivery

How is the data labeled and delivered?

Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd. The last table below sets each against what its official documentation states. These episodes use the same schema as every other Firsthand collection, so a loader that reads another Firsthand dataset reads this one without changes.

Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch.

Fast · on demand

How fast can custom rehabilitation data be collected?

Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that up front.

On-demand top-ups run against the same spec and accept criteria after each training run. Both rows are Available on request, so the site states no capture timeline for them beyond a quote against your spec.

Scale

Can this run at scale?

Firsthand runs custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. That is the site’s general statement about the network.

The site states no provider count, hour total, throughput or cadence for these two rows, and this page does not add one. How many contributors, sites and sessions a balance and equipment collection needs is set in the written spec and quoted before capture begins.

The spec

How do you start a pilot?

You describe the steps and sequence your policy needs: what a balance set-up arranges, what an equipment adjustment covers, where each episode starts and ends. We turn that into a written spec covering tasks, environments, capture tier, annotation depth, who stands in for the patient and accept criteria, then quote reach, timeline and price before any capture begins.

A Spec Pilot, a small and fast first batch, can prove the spec and accept criteria before you scale. Billing is per validated hour, a reject log ships with every batch, rejected items are recaptured at our cost, and every collection ships under a perpetual, buyer-owned commercial license.

At a glance

What you get.

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog rows

Which catalog rows cover balance training and rehab equipment operation?

The two rows in the Physiotherapy & Rehabilitation Clinic environment, reproduced as the catalog states them.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Balance trainingSet up balance boards and supports and guide a patient through balance exercises.Physiotherapy & Rehabilitation ClinicMediumPhone (head-mounted) / multiview rigAvailable on request
Rehabilitation equipment operationSet up and adjust rehab machines and guide a patient’s use of them.Physiotherapy & Rehabilitation ClinicMediumPhone (head-mounted) / multiview rigAvailable on request

Comparison

How does this page compare with the neighbouring physiotherapy and mobility pages?

The three existing pages closest to this topic, set against this page by main topic and rows covered.
PageMain topicRows or tasks coveredHow it differs from this page
This pageBalance training and rehab equipment operationBalance training, Rehabilitation equipment operationThe only page that covers Rehabilitation equipment operation; narrow on equipment-centred work
Egocentric physiotherapy stretching and exercise guidance dataHands-on stretching, exercise and balance workAssisted stretching, Therapeutic exercise guidance, Balance trainingCovers Balance training as one of three rows; does not cover Rehabilitation equipment operation
Stereo physiotherapy stretching and exercise guidance dataStereo and MCAP delivery for stretching and exercise guidanceAssisted stretching, Therapeutic exercise guidanceCovers neither row on this page; centres a calibrated stereo pair and MCAP
Egocentric patient mobility assistance dataStanding, walking, transfer, balance and stretching supportFive mobility rows, including Balance trainingCounts Balance training as one of five mobility rows; does not count Rehabilitation equipment operation

Streams and tasks

How do the stated streams map to balance and equipment work?

The streams the site states for Firsthand custom collections, set against what each carries in a clinic episode.
Stream or labelStatus on this siteWhat it carries in these episodes
Head and wrist RGB, depthStated; ten streams synced under 2 msKeeps the equipment, the patient and both hands on one timeline
3D hand pose, per-joint visibilityStated; two hands of 21 joints, with a visibility flag per jointCarries how the fingers hold a board, support or machine control and which joints were hidden
Contact and grasp eventsStatedMarks when a hand meets equipment or a patient
Action segmentsStated; frame-accurateSeparates a set-up, an adjustment and the guidance that follows
Task instructionStated; one per episodeNames the task the episode covers
Object labelsSet by your specNames the equipment and steps in the terms your policy uses
Patient body pose, equipment poseNot statedNot offered as a stream; set in the spec if needed
Force or tactile dataGlove tier stated; use on physiotherapy rows Not statedAdded only if a spec includes the glove tier

What is not stated

Which balance and equipment details does the site not state?

Fields the site does not state for these rows, and where each one is settled.
ItemStatus on this siteWhere it is settled
Board, support and machine typesNot stated; the rows name balance boards, supports and rehab machines onlyThe written spec
Exercises, adjustments and settingsNot statedThe written spec
Conditions, diagnoses, treatment protocols and outcomesNot statedNot offered; set in the spec only if a task needs it
Equipment brands and modelsNot statedThe written spec
Number of clinics or practitioners, skill levelsNot statedThe written spec
Who plays the patientSimulated patients only, as the site statesThe written spec, agreed before capture
Stereo pair on these rowsNot stated for the rows; offered generallyThe written spec, proved on a Spec Pilot
Throughput and capture timelineNot statedQuoted against your spec
Force or tactile data on physiotherapy rowsNot statedThe written spec, if needed
Success or quality labels, robot resultsNot statedThe written spec, if needed

Formats

Which formats carry balance training and rehab equipment data?

Delivery formats stated on the site, set against what each format official documentation states where the documentation was read.
FormatWhat the official documentation statesUsed for here
RLDSA dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README)Episode-based training loaders
LeRobotLeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation)LeRobot dataset format and tooling
WebDatasetTar files in which files that belong together share a basename, split into numbered shards (WebDataset README)Sharded streaming for large training runs
HDF5 and zarrStated by Firsthand onlyArray storage for custom pipelines
Rerun .rrdStated by Firsthand onlyMulti-stream synchronized playback for review

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show balance training or rehab equipment operation.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a physiotherapy clip

No physiotherapy clip is published on the site, so this is labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric balance training data, answered.

What is egocentric physiotherapy balance training and rehab equipment data?
Real-world, first-person video of setting up balance boards and supports and guiding a patient through balance exercises, and of setting up and adjusting rehab machines and guiding a patient’s use of them, captured against a written spec with 3D hand pose, depth and action segments.
Which catalog rows does it cover?
Balance training ("Set up balance boards and supports and guide a patient through balance exercises.") and Rehabilitation equipment operation ("Set up and adjust rehab machines and guide a patient’s use of them."). Both are Medium, in the Physiotherapy & Rehabilitation Clinic environment, captured by head-mounted phone or multiview rig and Available on request.
Is the capture stereo?
The site states a head-mounted phone or multiview rig for these rows and states no stereo pair for them. A stereo pair is offered generally and would be agreed in the written spec and proved on a Spec Pilot.
Are real patients filmed?
No. The site states that healthcare capture uses simulated patients only in training environments and that real patient footage is never captured. Faces are irreversibly blurred at ingest, and each episode links to a signed contributor release.
Does the site state machine settings, exercise protocols or clinical outcomes?
No. Machine types, settings, brands, exercises, conditions, treatment protocols and outcomes are Not stated, and this page gives no medical, handling or operating guidance. It describes what is collected for robot training.
How does this differ from the physiotherapy stretching and exercise guidance page?
That page covers Assisted stretching, Therapeutic exercise guidance and Balance training, and does not cover Rehabilitation equipment operation. This page covers Balance training and Rehabilitation equipment operation, so it is the one that includes the rehab machine row.
Are force data or tactile gloves included?
Not stated for these rows. The site offers a tactile glove tier as a pilot-ready option, but it does not state that the tier has been used on physiotherapy work. The site states hand pose, depth, contact events and action segments.
How fast can a custom dataset be collected, and how do you start?
Where coverage is deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, and these rows are quoted against your spec. Describe the steps you need, and a Spec Pilot proves the accept criteria before you scale.

Sources

Where are the delivery formats documented?

Request a custom dataset.

Tell us the set-ups, adjustments and sequence your policy needs to handle. We will quote reach, timeline, and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.