Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Stereo Glass Manufacturing Data

Handle molten or sheet glass, cut, form and finish pieces with tongs, cutters and grinders: the task catalog lists this as one row, rates it Hard, and this page covers that single row in stereo. It explains what stereo glass manufacturing video is, how the row is listed and captured, what a calibrated stereo pair and an MCAP file add, how the page differs from the egocentric glass manufacturing page and the two stereo glass pages, and what the site does not state. We run custom heavy industry data collection fast and on demand against a spec you write, for molten and sheet glass handling robot data and a glass cutting and finishing dataset, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
"Glass manufacturing" in Heavy Industry & Fabrication, rated Hard
Status
Available on request, as the catalog lists it
Catalog capture setup
Phone (head-mounted) / multiview rig; a stereo pair is a spec choice
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Requirements

What does stereo glass manufacturing data need?

01

One row, four verbs, three hand tools

The row names handling, cutting, forming and finishing, with tongs, cutters and grinders. A spec says which of those a collection records and in what order, rather than relying on one label.

02

Depth for the piece, the tool and the hands

A stereo pair at human-eye spacing makes depth recoverable from each frame pair, so the glass, the tool and the hands holding them share one frame.

03

Hand pose with a visibility flag

Pieces are small and are often hidden by the fingers that hold them. 3D hand pose carries a per-joint visibility flag, so a finger hidden behind a piece is flagged rather than guessed.

04

Streams on one clock, in one container

Streams are hardware-triggered onto one clock with a 2.0 ms cross-stream ceiling. MCAP can hold several timestamped channels in one file; which streams go in it is set in the skill spec.

Definition

What is stereo glass manufacturing data?

It is first-person video of a person doing the work the catalog row describes, handling molten or sheet glass and then cutting, forming and finishing pieces with tongs, cutters and grinders, recorded from their own point of view with two calibrated cameras and with hand pose and sensor streams alongside. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The data is human capture by paid, consented contributors, not robot or teleoperation data. It is built for teams training molten and sheet glass handling robot policies, or a glass cutting and finishing dataset for a model, who want depth and hand pose recorded rather than inferred from a single view. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page cover, and what is its status?

One. In Heavy Industry & Fabrication, in the Industrial & Manufacturing sector, whose listed examples include metal fabrication, woodworking, glass manufacturing, a concrete plant and a welding workshop, "Glass manufacturing" is described as "Handle molten or sheet glass, cut, form and finish pieces with tongs, cutters and grinders." It is rated Hard, its capture setup is Phone (head-mounted) / multiview rig, and it is listed as Available on request.

The site says nothing further about what that status means in volume, hours or delivered footage, so this page claims none, and what applies to a given order is confirmed when you request the quote. The first table below reproduces the row exactly as the catalog states it. This page names only the tasks, tools and material that appear in that row.

Hard

What does Hard mean for this row?

Only what the catalog says. Hard is the value in the Skill column for this row, and the site does not publish a separate rubric, failure rate or tolerance for it, so this page does not invent one. The row itself shows what is demanding in plain terms: it chains four verbs, handling, cutting, forming and finishing, and it pairs them with three hand tools, tongs, cutters and grinders, on molten or sheet glass.

The site also notes that this is hand-tool glass work, not machine controls, which is why it sits apart from the Operating Heavy Machinery Controls row in the same environment. The Hard-task hub lists this row beside the other Hard rows and links to the page for each. Nothing here states how skilled any contributor is, how often a step fails or how a finished piece is judged.

Difference

How is this different from the egocentric glass manufacturing and the other stereo glass pages?

The egocentric glass manufacturing page covers the same one row as egocentric capture and refers to the MCAP hub for the stereo rig. The stereo glass cutting and forming page treats the Glass manufacturing row together with the four Glass & Mosaic Studio rows, and the stereo glass etching and glassblowing page treats two studio rows. This page is the stereo and MCAP treatment of the one Glass manufacturing row on its own.

The site does not list an off-the-shelf glass dataset, so this work is custom collection. The comparison table below sets the four pages side by side.

Why stereo

Why capture glass manufacturing in stereo?

Glass work is about where the hands, the piece and the tool sit relative to one another: where a cutter meets a sheet, how tongs hold a piece, how a grinder meets an edge. A stereo pair recovers depth from the calibrated frame pair rather than from a standalone depth sensor, so the glass, the tool and the hands share a frame.

The site gives no depth accuracy figure and no label for a finished cut, a formed piece or a finished edge, so whether those are resolvable in depth is Not stated. The site states elsewhere that wet and reflective surfaces degrade active-stereo depth. How transparent or reflective glass behaves is Not stated, and a glass spec should expect the same care and check it on a Spec Pilot.

Capture setup

Is this row captured in stereo, and what does the setup look like?

The live row lists a head-mounted phone or a multiview rig as its capture setup. It does not list stereo, so the site does not claim that stereo footage of glass manufacturing exists. A stereo pair is available through the site’s general stereo offer and is a capture choice agreed in the skill spec and confirmed on a Spec Pilot.

The site describes two stereo setups and does not say which one a glass order uses. The hard-environments stack is a global-shutter 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, a depth sensor at 848×480 and 30 fps, and 200 Hz 6-DoF IMUs. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output.

Intrinsics and extrinsics are re-solved at the start and end of every session, and streams are hardware-triggered onto one clock with a 2.0 ms cross-stream ceiling. The catalog states that a multiview rig adds synchronized third-person angles when the spec asks for them, and wrist cameras give a closer view of the hands. Capture at your own facility is listed as not offered.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project’s licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of glass manufacturing data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For glass work the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments and per-frame instance masks elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch. The stream table below sets each stream beside what the site states about it.

Failure modes

What goes wrong when you record glass manufacturing in stereo?

Hands are the first risk. Pieces are small and are often hidden by the fingers that hold them, and a tool can hide the edge being worked. The visibility flag on each joint is the answer the site gives, contact events mark when a hand meets the item, masks are recorded per frame, and a spec can ask for wrist views so a grip the head camera loses is still recorded.

Surfaces are the second. Glass is transparent or reflective, and the site states that wet and reflective surfaces degrade active-stereo depth and that depth confidence maps mask low-confidence regions. Behaviour on glass itself is Not stated. Thermal, force and tactile readings are not among the listed streams either, and this page claims none.

Calibration is the third, because stereo depth is only as good as the rectification behind it: calibration is measured at the start and end of every session under a 0.28 px RMS gate. An episode is also rejected when the manipulated object is out of frame for more than 15 percent of it or an undocumented bystander appears, and a reject log ships with every batch.

Safety and privacy

What does the site say about safety and people in frame?

Nothing beyond the row. Safety, protective equipment, temperatures, glass types and certification are Not stated for this row, and this page makes no such claim. What a contributor may wear, do or show is agreed in the spec.

For every delivered episode the site states that faces, plates and screens are blurred irreversibly, and that footage that cannot be de-identified is discarded. Whether finished pieces or original designs are blurred or protected beyond the licence is Not stated.

Fast · on demand

How fast can a custom stereo glass manufacturing dataset be collected?

Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; where it is thin, turnaround runs three to four weeks. The site does not say which speed applies to a stereo glass manufacturing order, and the row is Available on request, so recruitment comes first and the timeline is quoted against your spec before capture begins.

The site lists no off-the-shelf glass dataset, so this is custom collection: custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The only stereo head rig the site states as shipping as MCAP is dataset 06, and this page does not claim off-the-shelf stereo coverage of glass work. On-demand top-ups run against the same spec and accept criteria after each training run.

Ordering

How do you order a stereo glass manufacturing dataset?

Describe the steps and their order, the glass, tongs, cutters and grinders and their start state, what counts as a finished cut, form or edge, and the variation your pipeline is missing. Then name the streams you want in the file, the topic naming and message encoding your reader expects, whether calibration ships inside the file or beside it, and whether MCAP is the only delivery or sits beside RLDS, LeRobot or WebDataset.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. Billing is per validated hour, rejected items are recaptured at the provider’s cost, and every collection ships under a perpetual, buyer-owned licence. The spec table below shows what each element decides.

At a glance

What you get.

Catalog row
"Glass manufacturing" (Heavy Industry & Fabrication); Hard; Available on request
Catalog description
"Handle molten or sheet glass, cut, form and finish pieces with tongs, cutters and grinders."
Catalog capture setup
Phone (head-mounted) / multiview rig; stereo is available only through the site’s general stereo offer and is agreed in the skill spec
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Delivery formats
MCAP, and RLDS, LeRobot, WebDataset, HDF5, zarr and Rerun .rrd
Billing and QA
Per validated hour; signed accept criteria; reject log per batch; rejected items recaptured at the provider’s cost
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
Glass types, thickness, piece sizes, equipment models, temperatures, safety, certification
Not stated; agreed in the skill spec or not claimed
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers glass manufacturing?

The one row this page relies on, with the catalog description, environment, skill, capture setup and status as listed.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Glass manufacturingHandle molten or sheet glass, cut, form and finish pieces with tongs, cutters and grinders.Heavy Industry & FabricationHardPhone (head-mounted) / multiview rigAvailable on request

Compared pages

How does this page differ from the other glass pages?

Each page, what it covers and how it treats the Glass manufacturing row. “Not covered” means the page leaves it out.
PageWhat it coversTreatment of the Glass manufacturing row
This page: stereo glass manufacturing dataThe one Glass manufacturing rowStereo pair and MCAP delivery, stream map and failure modes for this row only
Egocentric glass manufacturing dataThe one Glass manufacturing rowEgocentric treatment; refers to the MCAP hub for the stereo rig
Stereo glass cutting and forming dataThe Glass manufacturing row and the four Glass & Mosaic Studio rowsStereo and MCAP treatment of all five rows together
Stereo glass etching and glassblowing dataStudio rows in Glass & Mosaic StudioNot covered; a different environment

Stated vs not stated

What the site states about stereo capture for glass manufacturing

Left to right: the item, what the site states, and what that means for a glass manufacturing order. “Not stated” means the site does not say.
ItemWhat the site statesFor a glass manufacturing order
Catalog capture setupPhone (head-mounted) / multiview rig on the rowA stereo pair is a spec choice; stereo footage of this row is not claimed
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether a glass order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether a glass order uses it: Not stated
Reflective surfacesWet and reflective surfaces degrade active-stereo depth; depth confidence maps mask low-confidence regionsBehaviour on transparent or reflective glass is Not stated
Objects, hands and masksPer-frame instance masks stored at 848×480; per-joint visibility flag on hand pose; contact eventsStated
CalibrationMeasured every session and shipped with the episode; 0.28 px RMS reprojection gateStated
SynchronizationHardware-triggered onto one clock; 2.0 ms cross-stream ceilingStated
Row statusAvailable on requestNo volume, hours or delivered stereo footage is claimed on this page
Thermal, force or tactile streamsNot among the listed streamsNot claimed on this page
Glass types, thickness, piece sizes, defect classes, finished-cut labels, equipment models, safety, protective equipment, temperatures, throughput, accuracy, certification or resultsNot stated; the row says molten or sheet glass, tongs, cutters and grinders onlyAgreed in the skill spec, or not claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Stream map

Streams for glass work and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site’s episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Skill spec

What the skill spec fixes for a stereo glass manufacturing order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Steps and orderWhat one step is: handle, cut, form, finishEpisode boundaries and action segments; set per program
Glass, tools and start stateWhich glass, tongs, cutters and grinders, and how they beginSet per program; the site states no finished-cut label
Episode boundaryOne cut, one piece or a full sequenceSet per program; the site does not state an episode length for this row
Rig and streamsStereo pair, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
MCAP topics and encodingWhat your reader expectsSet per program
Calibration deliveryInside the file or beside itSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat passes QAReject log per batch
PrivacyHow people and items in frame are protectedFaces, plates and screens blurred at ingest
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Formats

Which formats can carry glass manufacturing data?

Delivery formats stated on the site, set against what each format’s official documentation states where it was read.
FormatWhat the official documentation statesUsed for here
MCAPAn open source container for multimodal log data with multiple channels of timestamped, pre-serialized data (mcap.dev)Stereo delivery in one file; see the MCAP hub page
RLDSA dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README)Episode-based training loaders
LeRobotLeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation)LeRobot dataset format and tooling
WebDatasetTar files in which files that belong together share a basename, split into numbered shards (WebDataset README)Sharded streaming for large training runs
HDF5, zarr and Rerun .rrdStated by Firsthand onlyArray storage and synchronized playback for review

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show glass, a cutter, tongs or any glass task.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a glass clip

No glass manufacturing clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo glass manufacturing video, answered.

What is stereo glass manufacturing data?
First-person video from two calibrated cameras of a person handling molten or sheet glass and cutting, forming and finishing pieces with tongs, cutters and grinders, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
One row, "Glass manufacturing", in Heavy Industry & Fabrication. It is rated Hard, its capture setup is Phone (head-mounted) / multiview rig, and it is Available on request. This page claims no volume, hours or delivered stereo footage.
Is stereo already captured on this row?
Not stated. The catalog lists a head-mounted phone or multiview rig, and a stereo pair is available through the general stereo offer, agreed in the skill spec and confirmed on a Spec Pilot.
How is this different from the egocentric glass manufacturing page and the stereo glass cutting and forming page?
The egocentric page covers the same row as egocentric capture. The stereo glass cutting and forming page covers this row together with four studio rows. This page is the stereo and MCAP treatment of the one Glass manufacturing row.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.
Does the site state safety, protective equipment or temperature detail?
No. Safety, protective equipment, temperatures, glass types and certification are Not stated, and no thermal, force or tactile stream is listed. Faces, plates and screens are blurred irreversibly for every delivered episode.
How fast is a first batch, and who owns the data?
Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; thin coverage runs three to four weeks. The row is Available on request, so the timeline is quoted against your spec. The buyer owns the dataset under a perpetual, irrevocable, non-exclusive-by-default licence, with exclusivity available.

Sources

Where is MCAP documented?

Request a custom stereo glass manufacturing dataset.

Tell us the steps and their order, the glass, tongs, cutters and grinders and their start states, the streams you want in the file and whether MCAP sits alone or beside a training format. We will quote reach, timeline and price against a written spec.