Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Task

Egocentric Leather Tooling and Saddlery Data

Wet the leather and stamp and carve patterns into it with tools and a mallet, or cut, stitch and fit leather straps and saddle parts with heavy-duty tools: two catalog rows where both hands, a piece of leather and a tool share one close view. This page covers egocentric leather tooling data, first-person leather stamping and carving video and a saddlery strap making dataset, collected as custom leathercraft data on demand against a spec you write.
Catalog rows
Leather tooling and Saddlery, in Leathercraft Workshop
Capture setup
Phone (head-mounted) / multiview rig, as the catalog lists
Status
Both Available on request; both Hard
License
Perpetual, buyer-owned

Requirements

What does leather tooling and saddlery capture need?

01

Both hands, the leather and the tool in frame

A head-mounted view keeps both hands, the leather piece and the tool, mallet or strap in one view while the work is done at the bench.

02

Hand pose with visibility through the whole step

3D hand pose with a per-joint visibility flag records where the fingers are, and which joints were hidden, while the leather is held and worked.

03

Step boundaries on the same clock

Frame-accurate action segments mark where wetting ends and stamping begins, or where cutting ends and stitching or fitting begins, aligned to video and depth.

04

A spec that keeps the two rows apart

Tooling and saddlery are different sequences, so a written spec names the pieces and steps for each row you want.

05

Rights you can ship on

A perpetual, buyer-owned commercial license backed by a documented consent chain.

Why it matters

What is egocentric leather tooling and saddlery data, and why does it need its own page?

Egocentric leather tooling and saddlery data is real-world, first-person video of work at a leatherworking bench. It is recorded from the worker viewpoint, with depth, 3D hand pose, contact events and frame-accurate action segments aligned on one hardware clock. It covers two tasks the site states in its task catalog: Leather tooling and Saddlery.

The site already has pages for leatherwork as a whole. One covers all four Leathercraft Workshop rows in first-person view and one covers the stereo and MCAP side of the same four rows. Here, tooling and saddlery are the subject, so a team that needs egocentric leather tooling data, first-person leather stamping and carving video or a saddlery strap making dataset can scope exactly those two tasks. It is custom leathercraft data collection, fast and on demand, written to your spec.

Catalog rows

Which catalog rows does this page cover?

The site lists both in a Leathercraft Workshop environment under the Creative Workshops & Crafts sector. The rows are Leather tooling ("Wet the leather and stamp and carve patterns into it with tools and a mallet.", Hard) and Saddlery ("Cut, stitch and fit leather straps and saddle parts with heavy-duty tools.", Hard). Each lists the capture setup "Phone (head-mounted) / multiview rig" and the status Available on request.

The environment lists its examples as leather tooling, hand-stitched goods, saddlery and leather bag or wallet making. The first table below reproduces all four rows of the environment as the catalog states them, so you can see where the two rows sit. The other two, Hand-stitching leather goods and Leather bag and wallet making, are not the subject of this page.

Leather tooling

How is the Leather tooling row described?

The catalog row reads "Wet the leather and stamp and carve patterns into it with tools and a mallet." It names the leather as the material, tools and a mallet as the equipment, and stamping and carving a pattern as the result. It covers wetting the leather first and then working the pattern into it, and it is rated Hard.

That is all the site states. Stamp and tool sets, the patterns, how the leather is wetted and any dye, finish or chemical are Not stated, so this page makes no claim about them. The written spec sets which patterns a session works, which steps count as one pass, and what a finished piece is. First-person leather stamping and carving video is therefore scoped by your description of the piece and the sequence.

Saddlery

How is the Saddlery row described?

The catalog row reads "Cut, stitch and fit leather straps and saddle parts with heavy-duty tools." It names three steps, cutting, stitching and fitting, applied to leather straps and saddle parts, and it names heavy-duty tools without listing them. It is rated Hard.

The site states no more. Tool models, strap and part sizes, the stitch used and what a correct fit means are Not stated, so this page makes no claim about them. A saddlery strap making dataset is scoped by the parts you name in the spec and the check you want applied to a fitted piece, not by a fixed catalog list.

Compared with neighbouring pages

How does this page differ from the other leathercraft pages?

Two neighbouring pages exist, and neither has leather tooling or saddlery as its main topic. The egocentric leathercraft page covers all four rows as a task family, with hand stitching and bag and wallet making alongside tooling and saddlery. The stereo leathercraft page covers the stereo and MCAP side of the same four rows.

This page is the narrow view for teams scoping only the two rows that decorate and fit leather. The second table below sets the three side by side. Where a team needs Hand-stitching leather goods or Leather bag and wallet making as well, the egocentric leathercraft page is the closer starting point, and where it needs the stereo and MCAP view, the stereo leathercraft page is.

Capture setup

Is this stereo capture, and how is bench work captured?

Not as the site states it. The catalog lists "Phone (head-mounted) / multiview rig" for the Leather tooling and Saddlery rows and states no stereo pair for either. The site does offer a stereo pair through its general stereo offer, so stereo is a capture choice agreed in the written spec and proved on a Spec Pilot, not something these rows already run. The stereo leathercraft page covers that side.

A head-mounted phone records the first-person view of real work on site, and a multiview rig adds synchronized third-person angles when the spec asks for them. The site states a head camera at 3840 × 2160 and 60 fps for its instrumented rig, but no camera count, resolution or frame rate for these rows, so the capture tier is agreed in the spec. Throughput is Not stated and is quoted against your spec.

Why it is hard

Why are leather tooling and saddlery hard to capture?

Both rows are rated Hard, and they describe work done with "tools and a mallet" and "heavy-duty tools". The site does not state material properties, thicknesses or forces, so this page makes no claim about how stiff or heavy the leather is. What the site does state is what egocentric video puts into the training distribution: hands entering the frame from below, occlusion during grasp and motion blur during reach.

The site also states why a hand pose stream matters here. RGB alone leaves a model to infer 3D hand structure it cannot see reliably through occlusion and motion blur. Firsthand delivers 3D hand pose as handJoints[2][21][3] in metric units in the head-camera frame, with a visibility flag per joint, aligned to depth and RGB. Two hands of 21 joints each are tracked per frame, and the flag records which of them were hidden behind the leather or a tool.

Streams and labels

What does each tooling or saddlery episode contain?

Each episode follows the Firsthand episode schema: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events, and frame-accurate action segments. For these rows, hand pose tracks how the fingers hold the leather and the tool, contact events mark when fingers or a tool meet the leather, and action segments mark each step, such as wetting, stamping, carving, cutting, stitching and fitting.

The only language data the site ties to Firsthand capture is one task instruction per episode. Object labels use the terms your spec sets. The data is human capture by paid, consented contributors, not robot or teleoperation data. Force or tactile data, and success or quality labels for a tooled pattern or a fitted strap, are Not stated for these rows, and this page does not offer them as deliverables.

Gloves

Can tactile gloves be used for leather tooling or saddlery?

The site offers a tactile glove tier as a pilot-ready option. The gloves track the hands, the glove signal is time-synced to a head-mounted stereo camera by hardware timestamps and an IMU, each glove is calibrated every session, and the pipeline checks signal dropout and sync drift.

The site does not state that the glove tier has been used on any leathercraft row, and it does not state whether gloves fit work with a mallet or heavy-duty tools. Treat force and tactile data as Not stated for these rows unless a spec adds the glove tier and agrees the fit with you. The tactile glove page covers the tier in full.

What is not covered

Which neighbouring tasks are not part of this page?

Hand-stitching leather goods and Leather bag and wallet making are the other two rows of the same environment, and they sit on the egocentric leathercraft page. This page lists them as neighbours and does not count them as tooling or saddlery. Skiving edges appears inside the bag and wallet row, and nothing else about edges is stated.

Edging, burnishing, dyeing and finishing a leather piece are tasks people often expect here, but the site states none of them as a catalog row. The site also states nothing about riders, animals or the fit of a piece on either. Anything beyond the two row descriptions would be set in the written spec.

Setting and privacy

Where is bench work captured and how are bystanders protected?

The catalog places both rows in the Leathercraft Workshop environment. The site names no workshop, city, school or leatherworker, and it does not state capture at a customer own workshop or facility. Environment, access and schedule are agreed in the spec, and the number of workshops is Not stated.

Every episode links to a signed contributor release through a documented consent chain. Faces, plates and screens are detected and irreversibly blurred at ingest, a reviewer confirms the result before anything ships, and the anonymization record is delivered with the data. An undocumented bystander is also a stated reject criterion, and the site states no further privacy rule specific to workshops.

Quality gates

How are tooling and saddlery episodes checked for lost views?

Episodes are machine-checked at ingest against the stated reject criteria, listed in the fourth table below, and a human reviewer then checks the result. The site states them for every episode, so they apply to tooling and saddlery like any other row.

It does not state how often a piece or a strap leaves the view at a bench, and it states no blur or sharpness rule. A rejected item goes to the reject log and is recaptured at our cost.

Delivery

How is the data labeled and delivered?

Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd. The last table below sets each against what its official documentation states. These episodes use the same schema as every other Firsthand collection, so a loader that reads another Firsthand dataset reads this one without changes.

Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch.

Fast · on demand

How fast can a custom leather tooling and saddlery dataset be collected?

Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that up front.

On-demand top-ups run against the same spec and accept criteria after each training run. Both rows are Available on request, so the site states no capture timeline for them beyond a quote against your spec.

The spec

How do you start a pilot?

You describe the pieces, steps and sequence your policy needs: which pattern is worked into which piece, which straps and saddle parts are cut, stitched and fitted, and where each step starts and ends. We turn that into a written spec covering tasks, environments, capture tier, annotation depth and accept criteria, then quote reach, timeline and price before any capture begins.

A Spec Pilot, a small and fast first batch, can prove the spec and accept criteria before you scale. Billing is per validated hour, a reject log ships with every batch, rejected items are recaptured at our cost, and every collection ships under a perpetual, buyer-owned commercial license.

At a glance

What you get.

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog rows

Where do Leather tooling and Saddlery sit among the workshop catalog rows?

The four rows in the Leathercraft Workshop environment, reproduced as the catalog states them. Leather tooling and Saddlery are the rows this page covers.
Task (as listed)Description (as listed)SkillCapture setupStatus
Leather toolingWet the leather and stamp and carve patterns into it with tools and a mallet.HardPhone (head-mounted) / multiview rigAvailable on request
SaddleryCut, stitch and fit leather straps and saddle parts with heavy-duty tools.HardPhone (head-mounted) / multiview rigAvailable on request
Hand-stitching leather goodsPunch stitch holes and saddle-stitch leather pieces with two needles and waxed thread.HardPhone (head-mounted) / multiview rigAvailable on request
Leather bag and wallet makingCut leather panels, skive edges, glue and stitch them into a bag or wallet.HardPhone (head-mounted) / multiview rigAvailable on request

Comparison

How does this page compare with the neighbouring leathercraft pages?

The two existing pages closest to this topic, set against this page by main topic and rows covered.
PageMain topicRows or tasks coveredHow it differs from this page
This pageLeather tooling and saddleryLeather tooling and SaddleryThe narrow view for two rows
Egocentric leathercraft video dataThe whole leatherworking bench as a task familyAll four rowsBroader; tooling and saddlery are two rows among four
Stereo leathercraft dataThe stereo and MCAP side of leatherworkAll four rowsA stereo sibling; the site states no stereo pair for these rows, so stereo comes through the general offer

The two rows

How do the two rows differ as the catalog describes them?

Only what the two catalog descriptions state, set side by side.
ItemLeather toolingSaddlery
Steps namedWet, stamp, carveCut, stitch, fit
Items namedThe leather, tools and a malletLeather straps, saddle parts and heavy-duty tools
SkillHardHard
Capture setupPhone (head-mounted) / multiview rigPhone (head-mounted) / multiview rig
StatusAvailable on requestAvailable on request
Stereo pair stated for the rowNo; offered generallyNo; offered generally

Streams and tasks

How do the stated streams map to tooling and saddlery?

The streams the site states for Firsthand custom collections, set against what each carries in a tooling or saddlery episode.
Stream or labelStatus on this siteWhat it carries in these episodes
Head and wrist RGB, depthStated; ten streams synced under 2 msKeeps the leather, the tool and both hands on one timeline
3D hand pose, per-joint visibilityStated; two hands of 21 joints, with a visibility flag per jointCarries how the fingers hold the leather and the tool and which joints were hidden
Contact and grasp eventsStatedMarks when fingers or a tool meet the leather
Action segmentsStated; frame-accurateSeparates wetting, stamping, carving, cutting, stitching and fitting
Task instructionStated; one per episodeNames the task the episode covers
Object labelsSet by your specNames the pieces and steps in the terms your policy uses
Force or tactile dataGlove tier stated; use on leathercraft rows Not statedAdded only if a spec includes the glove tier

Quality gates

How do the stated reject criteria apply to bench work?

The reject criteria the site states for every episode, and what the site does and does not state about each at a leatherworking bench.
Reject criterionStatus on this siteAt a leatherworking bench
Manipulated object out of frame for more than 15 percent of the episodeStatedApplies to every episode; how often a piece or strap leaves the view is Not stated
More than 35 percent invalid depth pixels in the manipulation regionStatedApplies to every episode; depth behaviour on leather is Not stated
Sync breach beyond the ceiling for more than three consecutive framesStatedApplies to every episode
Calibration drift beyond toleranceStatedApplies to every episode
Undocumented bystanderStatedApplies to every episode; the episode is rejected
Mismatch against the named skill specStatedChecked against the task and steps your spec names
Blur or sharpness ruleNot statedSet in the spec if your policy needs one

What is not stated

Which tooling and saddlery details does the site not state?

Fields the site does not state for these rows, and where each one is settled.
ItemStatus on this siteWhere it is settled
Leather types and thicknessesNot stated; the rows name leather onlyThe written spec
Stamp and tool sets, mallet and heavy-duty tool modelsNot stated beyond the tools named in the catalog rowsThe written spec
Patterns, how the leather is wetted, dye and finishNot statedThe written spec
Strap and part sizes, stitch used, what a correct fit meansNot statedThe written spec
Edging, burnishing, dyeing and finishingNot stated as catalog rowsThe written spec, if needed
Piece sizes and number of pieces or episodesNot statedThe written spec
Number of workshops or leatherworkers, skill levelsNot statedThe written spec
Stereo pair on these rowsNot stated for the rows; offered generallyThe written spec, proved on a Spec Pilot
Throughput and capture timelineNot statedQuoted against your spec
Force or tactile data on leathercraft rowsNot statedThe written spec, if needed
Success or quality labels, robot resultsNot statedThe written spec, if needed

Formats

Which formats carry tooling and saddlery data?

Delivery formats stated on the site, set against what each format official documentation states where the documentation was read.
FormatWhat the official documentation statesUsed for here
RLDSA dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README)Episode-based training loaders
LeRobotLeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation)LeRobot dataset format and tooling
WebDatasetTar files in which files that belong together share a basename, split into numbered shards (WebDataset README)Sharded streaming for large training runs
HDF5 and zarrStated by Firsthand onlyArray storage for custom pipelines
Rerun .rrdStated by Firsthand onlyMulti-stream synchronized playback for review

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show leather tooling or saddlery.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a leathercraft clip

No leathercraft clip is published on the site, so this is labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric leather tooling data, answered.

What is egocentric leather tooling and saddlery data?
Real-world, first-person video of a person stamping and carving patterns into wet leather with tools and a mallet, and cutting, stitching and fitting leather straps and saddle parts, captured against a written spec with 3D hand pose, depth and action segments.
Which catalog rows does it cover?
Leather tooling and Saddlery (both Hard), in the Leathercraft Workshop environment, captured by head-mounted phone or multiview rig and listed as Available on request.
Is the capture stereo?
The site states a head-mounted phone or multiview rig for these rows and states no stereo pair for them. A stereo pair is offered generally and would be agreed in the written spec and proved on a Spec Pilot.
Does the site state leather types, tool models, patterns or strap sizes?
No. Leather, tools, a mallet, straps, saddle parts and heavy-duty tools are named in the catalog rows, but leather types, tool models, patterns, strap and part sizes and what a correct fit means are Not stated, and the written spec sets them.
How does this differ from the egocentric leathercraft page and the stereo leathercraft page?
The egocentric leathercraft page covers all four workshop rows, and the stereo leathercraft page covers the stereo and MCAP side of the same four. This page covers only the Leather tooling and Saddlery rows.
Are force data or tactile gloves included?
Not stated for these rows. The site offers a tactile glove tier as a pilot-ready option, but it does not state that the tier has been used on leatherwork. The site states hand pose, depth, contact events and action segments.
How is privacy handled?
Faces, plates and screens are detected and irreversibly blurred at ingest, and a reviewer confirms the result. Each episode links to a signed contributor release, and the anonymization record ships with the data.
How fast can a custom dataset be collected, and how do you start?
Where coverage is deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, and these rows are quoted against your spec. Describe the pieces and steps you need, and a Spec Pilot proves the accept criteria before you scale.

Sources

Where are the delivery formats documented?

Request a custom dataset.

Tell us the pieces, steps and sequence your policy needs to handle. We will quote reach, timeline, and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.