Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Egocentric Printmaking Data

Inking a plate or screen, positioning the paper and pulling prints through the press is slow, hands-on studio work on a surface that changes with every pass, and the hands cover much of it. This page covers one catalog row: what it states, how the head-mounted phone and multiview rig capture it, what each episode carries and what the site does not state. We collect it as custom art studio data on demand, to a written skill spec, with the row status stated exactly as the catalog lists it.
Catalog row
Printmaking, in Art Studio (painting, sculpture, printmaking)
Skill and status
Hard; Available on request
Capture
Phone (head-mounted) / multiview rig
License
Perpetual, buyer-owned

Requirements

What does a printmaking capture need that a general studio clip does not?

01

One catalog row, three stages in order

Ink the plate or screen, position the paper and pull prints through the press, as the catalog words the row.

02

Hands, plate and paper in view together

Hand pose, contact events and per-frame instance masks are recorded on one clock, with a visibility flag on each joint.

03

Written accept criteria before capture

What counts as an inked plate, a positioned sheet or a pulled print is written into the spec up front.

04

Privacy stated plainly

Consent, anonymization and the license are stated below. This page makes no safety claim and gives no instructions.

Definition

What is egocentric printmaking data?

Egocentric printmaking data is first-person video of a person doing the work named in one catalog row: inking the plate or screen, positioning paper and pulling prints through the press. It is recorded from the contributor’s own point of view, with synchronized sensor streams alongside, so the frames show what the hands are doing to the plate, the paper and the press rather than a distant view of a studio. Searchers also phrase it as first-person screen and plate printing video, a press pulling robot dataset or custom art studio data collection. The data is the same, collected as a custom collection scoped to your task.

On this site the data is human capture: a paid, consented contributor wears the rig and performs the task from a written skill spec. It is not robot or teleoperation data, and the page makes no claim that any robot has been trained on it or that any robot prints. This page is narrower than the egocentric arts and crafts page, which covers four studio rows, and than the stereo art studio page, which covers the same four rows on the stereo and MCAP side. Here the single subject is the printmaking row.

Catalog row

Which catalog row covers printmaking, and what does it say?

One row, in the Art Studio (painting, sculpture, printmaking) environment under the Creative Workshops & Crafts sector. The catalog states it as "Printmaking": "Ink the plate or screen, position paper and pull prints through the press." The skill is Hard, the capture is Phone (head-mounted) / multiview rig and the status is Available on request. The environment’s example line reads "Artist studio, canvas painting, sculpting, mural work, printmaking". The first table below reproduces the row exactly.

Available on request means the work is scoped and recruited to spec when a buyer asks. It does not mean a stock of printmaking footage exists, and this page claims no volume, hours or delivered clips for the row. The row names a plate or a screen, paper and a press. It names no inks, no tools and no print type beyond those words, so if your program needs a particular one, it is written into the skill spec rather than assumed.

Why it is hard

Why is printmaking listed as Hard?

The site’s answer is the Skill column. The catalog rates the row Hard, and that is all "Hard" means here. This page imports no outside rubric and states no failure rate, tolerance or claim about how skilled any worker is. What the site does say is in the row text: three stages in sequence. The plate or screen is inked, the paper is positioned and the prints are pulled through the press. The site’s arts and crafts copy notes that printmaking is worded as a sequence, ink, position, pull, and that it and sculpting hold the two highest ratings on the site.

The site’s art studio copy adds that a brush, a tool or the work itself covers the fingers that hold it, and that fresh paint and an inked plate are wet surfaces where depth degrades. That is why hand pose carries a per-joint visibility flag, why contact events mark when a hand meets an item and why masks are recorded per frame. The challenge table below maps each difficulty to the stream or label the site already states, and says Not stated where nothing is.

Capture

How is printmaking captured?

The catalog lists one capture mode for the row: a head-mounted phone with a multiview rig. That is a first-person view of real work, with a multiview rig adding synchronized third-person angles when the spec asks for them. The site also describes the wider egocentric rig: ten synchronized streams (4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation and action labels), hardware-triggered onto one PTP clock domain and aligned under 2 ms. Which tier applies to a given printmaking program is not stated and is confirmed in the skill spec.

This page does not describe the row as stereo capture. Stereo is a separate offer on this site, agreed in a spec and confirmed on a Spec Pilot, and the stereo art studio page covers it for the four art studio rows. Force and tactile readings are not among the listed streams, which matters for a row built around pulling a print through a press.

Episodes

What does each episode contain?

Each attempt is delivered as one episode. The standard episode carries action segments, 3D hand pose for both hands with a per-joint visibility flag, contact events that mark when a hand meets an item, an objects list, and per-frame instance masks stored at the depth resolution of 848×480. Hand pose is 21 joints per hand, 3D, in metres in the head-camera frame. For printmaking an episode might cover one plate inked, one sheet positioned or one print pulled, or a longer run of prints; where each episode starts and ends is written into the spec.

Action segments divide an episode into start- and end-timestamped spans, each carrying start_ns, end_ns, verb and noun. The site lists no label for the outcome of a step, such as whether a plate was evenly inked or a print came out well, so ask for any such label in the spec.

Validation

How is the data validated and accepted?

Validation runs against signed accept criteria written into the spec before capture, and a reject log ships with each batch. Episodes are machine-checked against stated reject criteria, such as a sync breach or the manipulated object out of frame for more than 15 percent of the episode, and a human reviewer then checks each one. Only footage that clears the criteria is billed as a validated hour.

For this row, what counts as an inked plate, a positioned sheet or a pulled print is something the spec writes down, because the site states no outcome definition for it. Rejected items are recaptured at our cost, and the site states no accuracy figure for step labels, so what counts as a pass for a step boundary is set in the accept criteria.

Delivery and license

Which formats and license apply?

Delivery is in the format your stack already reads: RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata, with readable converter source alongside. The license is perpetual, irrevocable and worldwide, buyer-owned and non-exclusive by default, with exclusivity available as a separate term. The executed agreement controls.

Official documentation for the RLDS, LeRobot and WebDataset formats is linked in the sources below. MCAP delivery is a separate offer described on the egocentric stereo MCAP page, and nothing on this page promises an MCAP file for this row.

Neighbouring pages

How does this page differ from the other art studio and print pages?

Several pages touch the same studio or the same word, and none has studio printmaking as its main topic. The stereo art studio page covers all four art studio rows on the stereo and MCAP side, so printmaking is one of four there. The egocentric arts and crafts page covers the same four rows as first-person video, again one of four. The egocentric mural painting page is about the Mural work row, and the egocentric painting and coating page is about trade painting.

The egocentric print and packaging page is a different domain. It covers packaging line tasks in a print plant environment, not an artist’s plate, screen and press, so it is linked here only to avoid confusion. The comparison table below sets each page against this one.

Capture and privacy

How are contributors and their work protected?

Every contributor signs a written release, and each delivered episode links to it through consent artefact IDs. At ingest, automated detection finds faces, plates and screens and blurs them irreversibly, and speech is scrubbed of names, addresses and card numbers. A human reviewer confirms that no un-consented person is identifiable in any frame, and the anonymization record ships with the data. Firsthand does not capture at a customer’s own facility, and which studio a program uses is agreed in the skill spec before capture begins.

A printed artwork or a signature in frame is not listed as a blur category, so raise it in the spec if it matters. Neither are safety certifications, protective equipment, ink or solvent handling, and this page makes no safety claim and gives no instructions for any step.

Speed and scale

How fast and at what scale can a custom printmaking dataset be collected?

From signed spec to first validated batch, the published timeline is a median of 48 hours where coverage is deep and three to four weeks where it is thin and contributors need to be recruited first. The row is Available on request, so the range that applies is confirmed when the spec is quoted rather than assumed.

Printmaking is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The site states no provider count, hours or throughput for this row, and none of its off-the-shelf dataset descriptions names printmaking, so treat it as a custom collection.

Getting started

How do you start a pilot?

Describe the steps and where each starts and ends, the plate or screen and the paper you expect to see, what counts as a finished step and the failure or variation cases your pipeline is missing. That becomes a written skill spec, quoted for reach, timeline and price before any capture begins. Our skill spec guide walks through how to write one.

Most programs begin with a Spec Pilot, a small, fast first batch that proves the spec and the accept criteria on real footage before volume scales. Collections are billed per validated hour. Counts of sites, episodes and hours are set in the skill spec.

Capture setup

What is the capture setup for printmaking?

The capture setup as stated on this site. Counts of sites, contributors, episodes and hours are set in the skill spec.
PartAs stated on this site
Capture mode (this row)Phone (head-mounted) / multiview rig, as the catalog lists it
Multiview rigAdds synchronized third-person angles when the spec asks for them
StreamsTen: 4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation, action labels
SyncHardware-triggered onto one PTP clock domain; aligned under 2 ms
Hand pose21 joints per hand, 3D, in metres in the head-camera frame; per-joint visibility flag
StereoNot stated for this row; a separate offer, agreed in the skill spec and confirmed on a Spec Pilot
Which tier applies to a given programNot stated; confirmed in the skill spec

Every collection runs through the same seven-stage end-to-end custom collection pipeline.

Live catalog row

Stated row × description × skill × capture × status

The Printmaking row as the task catalog states it, reproduced without change.
TaskDescriptionEnvironmentSkillCaptureStatus
PrintmakingInk the plate or screen, position paper and pull prints through the press.Art Studio (painting, sculpture, printmaking)HardPhone (head-mounted) / multiview rigAvailable on request

Neighbouring pages

Page × main topic × where printmaking appears

How the nearest art studio and print pages differ from this one. Only what each page states is listed.
PageMain topicWhere printmaking appears
This pageThe single Printmaking row, egocentricThe whole page
Stereo art studio painting and sculpting dataFour art studio rows on the stereo and MCAP sideOne of four rows
Egocentric arts and crafts dataThe same four art studio rows as first-person videoOne of four rows
Egocentric mural painting dataThe Mural work rowNot covered
Egocentric painting and coating dataTrade paintingNot covered
Egocentric print and packaging dataPackaging line tasks in a print plant environment, a different domainNot covered

Capture challenges

Studio challenge × what goes wrong × stated stream or label

Each printmaking capture challenge mapped to a stream or label this site already states. Where nothing is stated, the row says so.
Studio challengeWhat goes wrongStated stream or label
Hands cover the plate, screen or sheetFingers hide the item being held or positioned3D hand pose with per-joint visibility flags; per-frame instance masks; reject if the object is out of frame for more than 15% of an episode
Hand meets plate, paper or pressThe hand, the item and the press touch in quick successionContact events mark when a hand meets an item; no finer contact label is stated
Inking the plate or screenA freshly inked surface is wetPer-frame instance masks and action segments; the site states that depth degrades on wet surfaces and that confidence maps mask low-confidence regions in its stereo description; not stated: no label for how evenly a surface was inked
Positioning the paperThe sheet is placed over the plate and partly covered by the handsInstance masks and hand pose; not stated: no label for whether a sheet is positioned correctly
Pulling prints through the pressThe press and the hands move togetherAction segments and contact events; not stated: no print outcome label and no press detail
Reflective or low-contrast surfacesA glossy plate or a pale sheet can be hard to tell from its surroundingsNot stated: nothing is listed specifically for reflective or low-contrast surfaces
Grip and pressing forceHow hard a plate is held or the press is pulledNot stated: no force or tactile stream is listed

Delivered vs not stated

What is delivered and what is not stated

Delivered items are stated elsewhere on this site. Items marked not stated are not promised on this page.
ItemStatusDetail
Action segmentsDeliveredstart_ns, end_ns, verb, noun, one per step
3D hand poseDelivered21 joints per hand; per-joint visibility flag for occluded fingers
Contact eventsDeliveredThe moment a hand meets an item
Per-frame instance masksDeliveredStored at 848×480
Consent and anonymization recordsDeliveredConsent artefact IDs per episode; anonymization record shipped with the data
FormatsDeliveredRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or raw streams with metadata
Inks, plates, screens, paper and press typesNot statedAgreed in the skill spec
Studio types and sizesNot statedAgreed in the skill spec
Cycle times and throughputNot statedNo such figure is listed
Number of sites, episodes and hoursNot statedSet per program in the skill spec
Print quality or completion labelsNot statedNo such label is listed
Force or tactile readingsNot statedNot among the listed streams
Safety certifications and protective equipmentNot statedNo such statement exists for this environment

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show printmaking or any studio work.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a printmaking clip

No printmaking clip is published on the site, so this is the nearest first-person clip, labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric printmaking data, answered.

What is egocentric printmaking data?
Custom first-person video of a paid, consented contributor inking a plate or screen, positioning paper and pulling prints through the press, captured to a written skill spec.
Which catalog row covers it, and what is its status?
One row, "Printmaking", in Art Studio (painting, sculpture, printmaking): "Ink the plate or screen, position paper and pull prints through the press." It is rated Hard and its status is Available on request. This page claims no volume, hours or delivered clips.
Is it captured with a head-mounted phone or in stereo?
The catalog lists Phone (head-mounted) / multiview rig for the row. Stereo is not stated for it; it is a separate offer agreed in the skill spec and confirmed on a Spec Pilot.
Does the data include print quality or inking labels?
Not stated. The site lists action segments, hand pose, contact events and instance masks, and no label for whether a plate was evenly inked or a print came out well. Ask for any such label in the spec.
Is there an off-the-shelf printmaking dataset?
Not stated. Printmaking is a custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Will faces or screens be visible?
Faces, plates and screens are blurred irreversibly at ingest, and a human reviewer confirms that no un-consented person is identifiable. Whether a printed artwork in frame is protected beyond the license is not stated.
Who owns the data and in which formats does it arrive?
The buyer owns it under a perpetual, non-exclusive commercial license by default. Formats include RLDS, LeRobot, WebDataset, HDF5, zarr and Rerun .rrd.
How fast can a fast, on-demand printmaking dataset arrive?
A median of a median of 48 hours from signed spec to first validated batch where coverage is deep, and three to four weeks where it is thin. The row is Available on request, so the range is confirmed when the spec is quoted.

Sources

Where are the delivery formats documented?

Request a custom printmaking dataset.

Tell us the steps and where each starts and ends, the plate or screen and paper you expect to see, whether an episode covers one print or a run of prints, and the angles you want beyond the head-mounted view. We will quote reach, timeline and price against a written spec.