Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Stereo Printmaking Data

Ink the plate or screen, position the paper and pull prints through the press: studio printmaking is slow, hands-on work on a surface that changes with every pass, and the hands cover much of it. This page covers the stereo and container side of screen and plate printing robot data for the one catalog row that names this work: what a calibrated stereo pair adds to stereo printmaking video, what MCAP is according to its own documentation, and what the site does not state. We run custom art studio data collection fast and on demand against a spec you write, as a press pulling dataset delivered as MCAP, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
"Printmaking" in Art Studio (painting, sculpture, printmaking), rated Hard
Status
Available on request, as the catalog lists it
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Why stereo and MCAP here

What do a stereo pair and an MCAP file add to printmaking video?

01

Depth on plate, paper and press

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the plate or screen, the sheet and both hands sit in one frame. The site gives no depth accuracy figure for this row.

02

Wet surfaces, with a mask instead of a guess

The site states that an inked plate is a wet surface where depth degrades, and that per-frame confidence maps mask low-confidence regions instead of hiding them.

03

Three stages in one row

The row bundles inking, positioning the paper and pulling prints. Action segments carry start_ns, end_ns, verb and noun, so each stage can be its own labeled span. Which verbs and nouns are used is set in the skill spec.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo printmaking data?

It is first-person video of a person doing studio printmaking work, recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: stereo printmaking video, screen and plate printing robot data, a press pulling dataset, or custom art studio data collection at scale. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The site does not state that stereo is already running on this row. The catalog lists a head-mounted phone or a multiview rig as the capture setup, so a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The data is human capture by paid, consented contributors, not robot or teleoperation data, and this page makes no claim that any robot prints. Using it for a specific robot still needs your own retargeting step. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page rely on, and what is its status?

One, listed in lib/commercial-catalog-data.ts under the Art Studio (painting, sculpture, printmaking) environment in the Creative Workshops & Crafts sector, whose examples line reads "Artist studio, canvas painting, sculpting, mural work, printmaking". "Printmaking" is described as "Ink the plate or screen, position paper and pull prints through the press." It is rated Hard, it lists "Phone (head-mounted) / multiview rig" as the capture setup, and it is Available on request.

Available on request means the work is scoped and recruited to spec when a buyer asks for it, rather than running as an open capture stream today. The site states no delivered hours and no delivered stereo footage for this row, so this page claims none. The row names a plate or a screen, paper and a press, and it names no ink, no tool and no print type beyond those words, so if your program needs a particular one, it is written into the skill spec rather than assumed.

Difference

How is this different from the egocentric printmaking page and the stereo art studio page?

This page is the stereo and MCAP treatment of a single Available on request row. The egocentric printmaking page covers the same row as first-person video, and it states that stereo is not stated for the row and that MCAP is not promised for it. The stereo art studio painting and sculpting page covers four rows, Canvas painting, Mural work, Printmaking and Sculpting, on the stereo and MCAP side, so printmaking is one of four there.

This page is the one place where the printmaking row is the whole subject and the stereo and MCAP side is the lens. The egocentric print and packaging page is a different domain: it covers packaging line tasks in a print plant environment, not an artist’s plate, screen and press, so it is linked here only to avoid confusion. The first table below reproduces the row, and the second sets the pages side by side.

Capture setup

What capture setup does the row list, and where does stereo come in?

The catalog lists "Phone (head-mounted) / multiview rig" for this row. The site does not state a stereo pair for it. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. A head-mounted phone records the first-person view of real work, and a multiview rig adds synchronized third-person angles when the spec asks for them. The catalog does not say which of its two modes applies, so the setting is agreed in the spec.

The site describes two stereo setups and does not say which one an order for this row uses. The hard-environments stack is a global-shutter 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, a depth sensor at 848×480 and 30 fps, and 200 Hz 6-DoF IMUs. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. Which studio a program uses, and the camera count, resolution and frame rate for this row, are Not stated and are agreed in the spec, because the site lists capture at a customer’s own facility as not offered.

Why stereo

Why capture printmaking in stereo?

Printmaking puts a plate or screen, a sheet of paper, two hands and a press in one small space, and the hands sit between the camera and the work. The catalog calls the row Hard. A stereo pair recovers depth from the calibrated frame pair rather than from a standalone depth sensor, so the geometry of the plate, the sheet and the hands sits in the same capture that shows the fingers working.

A stereo pair adds depth, not a verdict on whether a plate was inked evenly or a print came out well. The site lists no outcome, quality or success label for this row, and none is claimed. What counts as an inked plate, a positioned sheet or a pulled print is written into the spec as accept criteria before capture.

Three stages

What changes between inking, positioning the paper and pulling prints?

The row is worded as a sequence: ink the plate or screen, position paper, pull prints through the press. A spec that says "make a print" gives one long action segment. A spec that names inking, positioning and pulling as separate steps gives a sequence you can slice by stage. Whether each of those is its own segment, and whether one print or a run of prints is one episode, is a spec decision, not a default. The site does not set an episode length or a step count.

This page describes capture only. It gives no printing technique, no ordering of steps as instruction and no guidance on materials, because the site states none, and it makes no safety claim. The row names no ink, no solvent and no tool beyond the plate or screen, the paper and the press, so none is named here.

Occlusion

What do the hands, the plate and the press do to visibility?

The site states that the hands occlude the work and that fingers disappear behind objects. The art studio copy adds that a tool or the work itself covers the fingers that hold it. That is why each hand joint carries a visibility flag, why contact events mark when a hand meets an item, and why instance masks are recorded per frame. When a sheet is placed over a plate and partly covered by the hands, the flag marks a hidden finger as hidden rather than filling it in.

The site also states that depth degrades on wet and reflective surfaces, and that an inked plate is a wet surface. Per-frame confidence maps mask low-confidence regions, so the delivery shows where depth is weak. Whether a glossy plate or a pale sheet counts as reflective or low-contrast is Not stated, and so is a mask accuracy figure. A spec that needs a clear view of a step should name that step, ask for wrist views or a multiview angle, and confirm it on a Spec Pilot.

People and privacy

What does the site say about contributors, consent and privacy?

The site states a consent chain for contributors. Every contributor signs a written release, each delivered episode links to it through consent artefact IDs, and a break at any of the six checkpoints discards the footage. An undocumented bystander is a stated reject criterion. For every delivered episode the site states that faces, plates and screens are detected and irreversibly blurred at ingest, that a reviewer confirms the result before anything ships, and that footage that cannot be de-identified is discarded. The anonymization record ships with the data.

A printed artwork or a signature in frame is not listed as a blur category, so raise it in the spec if it matters. The site names no artist, studio or client for this row and lists capture at a customer’s own facility as not offered. Who may be in frame is agreed in the spec. This page makes no safety claim and gives no instructions, and it is not legal advice. The executed agreement controls.

Not stated

What does the site not state about printing equipment, materials and results?

Plate, screen, paper and press types, inks and their handling, tools, studio types and sizes, print sizes, edition counts, cycle times, error rates, force or tactile readings, a print quality or completion label, any safety certification and what a correct or finished print means are Not stated. They are set in the written spec, and this page claims none of them.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of printmaking data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For this row the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch. The fourth table below sets each stream beside what the site states about it.

Failure modes

What goes wrong when you record printmaking in stereo, and what does QA reject?

Hand occlusion by the plate, the sheet and the press is the first risk, under the visibility flag above. Wet surfaces on an inked plate are the second, where depth degrades and the confidence map marks it. Calibration is measured at the start and end of every session under a 0.28 px RMS gate, and an episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for more than 35 percent of depth pixels in the manipulation region being invalid, for an undocumented bystander or for a mismatch against the named skill spec.

A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. The fifth table below lists the failure modes beside what the site states.

Scale

How do off-the-shelf coverage and custom collection combine for printmaking?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets, of which stereo is ~64,800 hours across 9 datasets. None of them names printmaking, so for stereo capture of this task this is custom collection, not an off-the-shelf purchase.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; where it is thin, turnaround runs three to four weeks. The site does not say which applies to this row, which is Available on request, so the timeline is quoted against your spec. Collections are billed per validated hour, and rejected episodes and recaptures are never billed.

Ordering

How do you order a stereo printmaking dataset?

Describe the task and where each episode starts and ends: one stage of inking, positioning or pulling, or a whole print, or a run of prints. Say what counts as the object and what counts as a finished stage, the setting and lighting, the privacy rule for anyone in frame, and name the variation your pipeline is missing. Then name the streams you want in the file, the topic naming and message encoding your reader expects, whether calibration ships inside the file or beside it, and whether MCAP is the only delivery or sits beside RLDS, LeRobot or WebDataset.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. The sixth table below shows what each spec element decides.

At a glance

What you get.

Catalog row
"Printmaking" (Art Studio (painting, sculpture, printmaking), Creative Workshops & Crafts); "Ink the plate or screen, position paper and pull prints through the press."; Hard; Available on request
Catalog capture setup
Phone (head-mounted) / multiview rig. The site states no stereo pair for this row, so a stereo pair is agreed in the skill spec through the general stereo offer
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Plate, screen, paper and press types, inks, tools, studio and print sizes
Not stated; agreed in the skill spec
Print quality or completion labels, force or tactile readings
Not stated on the site as standard fields
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers printmaking, and what is its status?

One row from lib/commercial-catalog-data.ts, reproduced as the catalog states it, plus items the catalog does not list.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
PrintmakingInk the plate or screen, position paper and pull prints through the press.Art Studio (painting, sculpture, printmaking)HardPhone (head-mounted) / multiview rigAvailable on request
Separate inking, positioning or pulling rowsNot stated as separate rowsNot statedNot statedNot statedNot stated
Named presses, plates, screens, inks or paperNot statedNot statedNot statedNot statedNot stated

Compared pages

How does this page differ from the egocentric printmaking page and the stereo art studio page?

Each page and what it covers. Statuses are as the site lists them; none of these pages is claimed to hold delivered hours here.
PageWhat it coversRow status as listedRelation to this page
This page: stereo printmaking dataOne row: PrintmakingAvailable on requestStereo pair and MCAP delivery for the printmaking row alone
Egocentric printmaking dataThe same single row as first-person videoAvailable on requestNot stereo as its subject; no MCAP promised for the row
Stereo art studio painting and sculpting dataFour rows: Canvas painting, Mural work, Printmaking, SculptingAll four Available on requestStereo and MCAP treatment that shares this row with three others
Egocentric arts and crafts dataThe same four art studio rows as first-person videoAll four Available on requestNot stereo as its subject; one of four rows
Egocentric print and packaging dataPackaging line tasks in a print plant environmentNot applicableA different domain, linked only to avoid confusion
Egocentric stereo data in MCAPThe stereo and MCAP hub across tasksNot applicableGeneral stereo and MCAP treatment; not specific to printmaking

Stated vs not stated

What the site states about stereo capture for printmaking

Left to right: the item, what the site states, and what that means for an order. “Not stated” means the site does not say.
ItemWhat the site statesFor a printmaking order
Catalog capture setupPhone (head-mounted) / multiview rig on the rowNo stereo pair is stated for this row; a stereo pair is a spec choice through the general stereo offer
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Hands, contacts and masksPer-joint visibility flag on hand pose; contact events; per-frame instance masks stored at 848×480Stated; what counts as the object is set in the spec
Hand occlusionThe hands occlude the work and fingers disappear behind objects; visibility flags and instance masks address itStated; how often a plate or sheet leaves the view is Not stated
Depth on wet and reflective surfacesDepth degrades on wet and reflective surfaces; an inked plate is a wet surface; confidence maps mask low-confidence regionsStated; behaviour on a glossy plate or a pale sheet is Not stated
CalibrationMeasured every session and shipped with the episode; 0.28 px RMS reprojection gateStated
SynchronizationHardware-triggered onto one clock; 2.0 ms cross-stream ceilingStated
Row statusAvailable on requestNo volume, hours or delivered stereo footage is claimed on this page
Face blurring and anonymizationFaces, plates and screens detected and irreversibly blurred at ingest; reviewer confirms; footage that cannot be de-identified is discardedStated; record ships with the data
Printed artwork or signature in frameNot listed as a blur categoryRaise it in the spec if it matters
Equipment, materials, safety certificationNot statedNot claimed; set in the spec
Print quality, cycle time, error rate, force or tactile dataNot statedNot claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Stream map

Streams for printmaking data and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Failure modes and QA

What goes wrong in printmaking capture, and what QA does about it

Left to right: the failure mode, what the site states, and what a buyer sees. “Not stated” means the site does not say.
Failure modeWhat the site statesWhat a buyer sees
Fingers hidden by the plate, sheet or pressPer-joint visibility flag on hand pose; wrist views and a multiview angle available in the specA hidden joint flagged as hidden, not guessed
Plate, screen or sheet out of framePer-frame instance masks; episode rejected when the object is out of frame for more than 15 percent of itReject log per batch; what the object is gets set in the spec
Wet inked surfaceDepth degrades on wet surfaces; confidence maps mask low-confidence regionsConfidence maps ship with depth; Spec Pilot settles it
Glossy or low-contrast surfacesNot stated for these itemsSettle in the spec and on a Spec Pilot
Invalid depth in the manipulation regionEpisode rejected when more than 35 percent of depth pixels are invalidReject log per batch
Bystander or printed artwork in frameFaces, plates and screens blurred and reviewer-confirmed; undocumented bystander rejected; a printed artwork is not a listed blur categoryReject log per batch; anonymization record ships with the data
Calibration driftSolved at the start and end of every session; 0.28 px RMS gateCalibration shipped with the episode
Sync breachRejected beyond the 2.0 ms ceiling for more than three consecutive framesReject log per batch
Spec mismatchRejected for a mismatch against the named skill specReject log per batch

Skill spec

What the skill spec fixes for a stereo printmaking order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
RowPrintmaking, worded as the catalog words itSet per program; status as listed
Stages and orderWhat one stage is: inking, positioning the paper or pulling a print, and in what orderEpisode boundaries and action segments; set per program
Episode scopeOne stage, one print or a run of printsSet per program; the site does not state an episode length
Object definitionWhether the plate or screen, the sheet or the press counts as the objectContact events and the out-of-frame reject rule; set per program
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
Setting and lightingWhere capture runs and how the studio is litSet per program; the site states no lighting setup for this row
MCAP topics and encodingWhat your reader expectsSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat counts as an inked plate, a positioned sheet or a pulled print, and what passes QAReject log per batch
PrivacyHow anyone, faces, screens and printed artwork in frame are handledFaces, plates and screens blurred at ingest; other items agreed in the spec
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show printmaking or any studio work.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a printmaking clip

No printmaking clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo printmaking video, answered.

What is stereo printmaking data?
First-person video from two calibrated cameras of a person inking a plate or screen, positioning paper and pulling prints through the press, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
One, under Art Studio (painting, sculpture, printmaking): "Printmaking" (ink the plate or screen, position paper and pull prints through the press). It is Hard and Available on request. This page claims no delivered hours.
Is stereo already captured on this row?
Not stated. The catalog lists a head-mounted phone with a multiview rig for the row. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric printmaking page?
That page covers the same row as first-person video, with stereo not stated for it and no MCAP promised. This page is stereo capture of the printmaking row, with MCAP delivery.
How is it different from the stereo art studio page?
The stereo art studio page covers four rows: Canvas painting, Mural work, Printmaking and Sculpting. This page covers the printmaking row alone.
Is there an off-the-shelf printmaking dataset?
No listed dataset names this task, so stereo capture of it is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Will faces or printed artwork be visible?
Faces, plates and screens are irreversibly blurred at ingest and a reviewer confirms the result. A printed artwork or signature is not a listed blur category, so raise it in the spec. This page gives no printing or safety instructions.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.

Sources

Where is MCAP documented?

Request a custom printmaking dataset delivered as MCAP.

Tell us the task and where each episode starts and ends, whether an episode covers one stage, one print or a run of prints, what counts as the object and as a finished stage, the setting and lighting, the privacy rule for anyone in frame, the streams you want in the file and whether MCAP sits beside RLDS, LeRobot or WebDataset. We will quote reach, timeline and price against a written spec, with a first validated batch proven on a Spec Pilot.