Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Task row

Egocentric Shut-Off Valve and Gauge Check Data

Operating a shut-off valve and then reading the gauge is a short, two-part job at a trades bench: a hand turns or works the valve, and the eyes go to a dial. Both the hand on the valve and the gauge face have to stay in view for the clip to be useful. This page covers egocentric valve operation data for the one catalog row that names this work: what the row says, how it is captured, what the site states about labels and delivery, and what it does not state. We run custom trades data collection fast and on demand against a spec you write, as first-person gauge reading video and a handheld gripper shut-off valve dataset, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
Shut-off valve + gauge check: Medium, Available on request
Environment
Trades Workshop Bench (Construction & Trades)
Capture mode
Multiview rig + handheld grippers, as the catalog lists it
License
Perpetual, buyer-owned

Requirements

What does a valve and gauge capture need that a general workshop clip does not?

01

One named catalog row

The task is the catalog row "Shut-off valve + gauge check", described as "Operate a shut-off valve and read the gauge." A spec names that row rather than relying on a generic trades label.

02

The hand, the valve and the gauge in view

The row pairs an action with a reading. Hand pose carries a per-joint visibility flag, so a finger hidden behind the valve is flagged rather than guessed, and the spec says what the camera must see of the gauge.

03

A spec that splits the two parts

The row words two things in one description: operate a shut-off valve and read the gauge. The spec names which you need, in what order, and where each starts and ends, so each becomes its own labeled segment.

04

Limits stated plainly

No valve or gauge type, reading, pressure value, procedure or quality claim is made, because the site states none for this row.

Definition

What is egocentric shut-off valve and gauge check data?

Egocentric shut-off valve and gauge check data is first-person video of a person operating a shut-off valve and reading a gauge, recorded from their own point of view with synchronized sensor streams alongside. The task wording comes from one catalog row, "Shut-off valve + gauge check", which the catalog describes as "Operate a shut-off valve and read the gauge." This page repeats that description as written and adds nothing to it. The data is human capture: a paid, consented contributor performs the task to a written skill spec. It is not robot or teleoperation data, and it is not a fixed corpus you download.

People reach this topic through several phrasings: egocentric valve operation data, first-person gauge reading video, a handheld gripper shut-off valve dataset, or custom trades data collection. They describe one request from different angles. Under each of them the work is the same: write down the task, collect it on demand, and receive validated episodes with the labels a training pipeline expects. Nothing on this page states that the video carries a gauge-reading label, a valve-position label or an open-or-closed label.

Nothing here is an instruction for operating a valve or reading a gauge. The page describes what a capture of the task contains, not how the work should be done.

The task row

Which catalog row covers a shut-off valve and gauge check?

One row names the task. In the task catalog, the Trades Workshop Bench environment, in the Construction & Trades sector, lists "Shut-off valve + gauge check" with the description "Operate a shut-off valve and read the gauge." It is rated Medium, its capture mode is Multiview rig + handheld grippers, and its status is Available on request, meaning the work is scoped and recruited to spec when a buyer asks.

The catalog gives one line for the row. What kind of valve it is, what the gauge shows, how many operations an attempt holds and where an attempt starts and ends are set by your spec. The first table below gives the row exactly as the catalog states it. This page claims no delivered hours for it.

The setting

What is the Trades Workshop Bench environment?

The catalog describes the environment as a workshop bench with hand and power tools, and names wrenches, drivers, a drill, a saw, clamps and fasteners. A valve and a gauge are not in that list, and the site states no valve or gauge fixture for the environment, so what stands at the bench for this row is a spec question. Thirteen rows sit in the environment. Every one lists the same capture mode, a multiview rig with handheld grippers, and the same status, Available on request. Ten are rated Medium, two are rated Easy and one is rated Hard.

The site describes this capture mode as a staged working set recorded by a multiview rig while the operator performs the task with handheld grippers, so demonstrations map onto a robot end effector. The site states that Firsthand does not capture at a customer’s own facility, so the bench is a capture setting arranged for the task, not your plant or your site.

Nearby rows

Which other catalog rows sit next to the valve and gauge row?

Several neighbouring rows in the same environment sit close to this one. "Tighten bolt with wrench" reads "Fit a wrench and tighten a bolt to snug." "Ratchet socket on nut" reads "Use a socket ratchet on nuts." "Drive screws with driver" reads "Drive screws with a power driver." "Hang a fixture" reads "Level, mark, and screw-mount a fixture." "Wire an outlet" reads "Strip wires and land on terminals." Four are rated Medium and one, the outlet row, is rated Hard. All are listed with Multiview rig + handheld grippers and Available on request.

These are separate rows, not steps of the valve row. They are context only, and each is its own request. If your policy needs a wrench on a fitting before or after the valve step, that is a spec question for the neighbouring row, not something this page promises.

Related pages

How does this page differ from the plumbing, HVAC and fastening pages?

The plumbing page is organized around a trade: ten catalog rows, from plumbing repair calls and fixture installation to drain snaking, a water heater row, two pipe cutting and fitting rows and this valve row. The valve row is one of ten there, not the main topic. The HVAC page is organized around HVAC service calls: five HVAC-related rows, with gauge sets appearing inside its filter-service row descriptions rather than as a task of their own. The screwdriving and torque pages cover fastening rows. None of them keeps the valve row as its single subject.

This page keeps one row, Shut-off valve + gauge check, and looks at what a capture of it needs. The comparison table below sets the pages side by side. For plumbing as a whole, start from the plumbing page. For HVAC service work, start from the HVAC page. For operating a shut-off valve and reading the gauge, start here.

Why it is hard

Why is a valve and gauge check hard to capture for robot learning?

The row bundles two things in one description: operate a shut-off valve and read the gauge. A spec has to say which of those it needs, in what order, and where each one starts and ends, so each can become its own labeled segment. The site states no valve type, gauge type, operating motion, number of turns or duration, so none is claimed here.

Limits the site already states apply. Hand occlusion is the first: fingers disappear behind objects in manipulation, which is why 3D hand pose carries a per-joint visibility flag. A valve body or handle can hide part of the hand. Depth is the second: it degrades on wet and reflective surfaces, and per-frame confidence maps mask the low-confidence regions rather than hiding them. How depth behaves on a metal valve body or a glass gauge face is not stated for this row. If your policy depends on it, say so at the start.

An episode is also rejected if the manipulated object is out of frame for more than 15 percent of it, so the spec decides what the manipulated object is: the valve, the gauge or both.

Capture setup

What capture setup is used for this row?

The catalog lists one capture mode for the row: a multiview rig with handheld grippers. The site describes that mode as a staged working set recorded by a multiview rig while the operator performs the task with handheld grippers. The site does not explain the grippers further and does not state a camera count for the row.

The instrumented tier is a head-mounted stereo rig worn by the contributor, with first-person RGB and metric depth recovered from the calibrated stereo rig. The wider stack is ten streams: a 4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation and action labels, hardware-triggered onto one PTP clock domain and aligned under 2 ms, with 6-DoF IMU data at 200 Hz. The rig is calibrated twice per session, and an episode is accepted only if RMS reprojection stays under 0.28 px. Which tier applies to this row is not stated and is confirmed in the skill spec.

This is an egocentric page. The catalog does not list stereo capture for the Shut-off valve + gauge check row, and this page does not describe the task as stereo capture. Stereo applies only through the site’s general stereo offer, agreed in the skill spec.

Handheld grippers

Why does a handheld gripper capture matter for a shut-off valve dataset?

The catalog lists handheld grippers because the operator holds a gripper rather than a bare hand while performing the task, and the site says this lets demonstrations map onto a robot end effector. For a valve row that matters because the interaction between the end effector and the valve is what a policy has to reproduce. A handheld gripper shut-off valve dataset keeps the demonstration closer to the hardware a robot would use than a bare-hand clip does.

The site does not state which gripper is used, how it attaches or what its dimensions are, and this page names none. It also does not claim that a model trained on this capture succeeds at the task. The embodiment mapping is a design choice agreed in the skill spec, and the site does not claim that human capture replaces robot data.

Reading the gauge

What does reading the gauge mean for the footage?

The row ends on a reading, so the footage has to show the gauge. The site states no label for a gauge reading, so a reading is not delivered as a value unless the spec asks for a labeled field and the parties agree how it is produced. The site states no reading, dial range, unit or pressure value for any row, and this page gives none.

The site states that faces, plates and screens are blurred irreversibly at ingest. It does not say whether a gauge face counts, and a gauge is not a screen unless it has one. What must stay legible on a gauge, and whether any printed marking is blurred, is therefore settled in the spec before capture. Either way, the first-person view of the gauge is the main thing the spec should describe, because a reading depends on seeing the dial.

Episodes

What does one episode contain?

Each attempt is delivered as one episode. The site does not set an episode length, so the skill spec decides what one attempt is: a single valve operation, a single gauge look, or the whole run from first touch to final look. Inside the episode, the synchronized streams run from start to end, and action segments divide it into labeled spans. Whether the valve step and the gauge step stand alone, as they are worded together in this row, or sit inside a longer bench sequence is a spec decision.

The standard fields are action segments with start_ns, end_ns, verb and noun; hand_joints and hand_visible for 3D hand pose on both hands, with a per-joint visibility flag; contact_events for the moment a hand meets an object; an objects list; and per-frame instance masks stored at the depth resolution of 848×480. The site does not say whether the valve or the gauge counts as the item in a contact event, so the spec settles it.

Labels and delivery

How is the data validated and delivered?

Validation runs against signed accept criteria written into the spec before capture, and a reject log ships with each batch. Episodes are machine-checked against reject criteria, including a sync breach beyond the ceiling for more than three consecutive frames, calibration drift beyond tolerance, the manipulated object out of frame for more than 15 percent of the episode, more than 35 percent invalid depth pixels in the manipulation region, an undocumented bystander and a mismatch against the skill spec. A human reviewer then checks each episode. Only footage that clears the criteria is billed as a validated hour, and rejected items are recaptured at our cost.

Delivery is in the format your stack already reads: RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata, with readable converter source alongside. The license is perpetual, irrevocable and worldwide, buyer-owned and non-exclusive by default, with exclusivity available as a separate term. The executed agreement controls.

Capture and privacy

How are people and printed text protected?

Every contributor signs a written release, and each delivered episode links to it through consent artefact IDs in the batch data card. At ingest, automated detection finds faces, plates and screens and blurs them irreversibly. Speech is scrubbed of names, addresses and card numbers. A human reviewer confirms that no un-consented person is identifiable in any frame, footage that cannot be de-identified is discarded, and the anonymization record ships with the data.

A bench can put printed text in view, such as a label on a fitting or a marking near a dial. Whether such a label is blurred is not stated, so it is agreed in the spec. A bench can have other people nearby, and an undocumented bystander is a reject criterion. The site states no contributor safety protocol and no safety guidance for any trades row, and this page does not describe one.

Not stated

What does a shut-off valve and gauge check collection not include?

Where this site does not state something, this page says "not stated" rather than filling the gap. There is no listed label for valve position, gauge reading, open or closed state or success, no force or torque stream, no pressure stream, and no stated cycle time, error rate or success rate for the row. The site states no valve type, gauge type, pressure, dial range or unit for any row. Counts of contributors, episodes and hours are set in your skill spec. Nothing here claims a training outcome or a model improvement.

The tradeoff to plan for is the embodiment gap between a person operating a valve with a handheld gripper and a robot platform doing it, which retargeting or pairing with robot data has to close. No named model was trained on this capture, and this page makes no claim about any.

Custom collection

Is there an off-the-shelf dataset, or is this custom collection?

The row for this task is Available on request, so a shut-off valve and gauge check collection is custom collection. It runs as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. This page does not state a provider count, hours or throughput beyond what the site already states.

Because the row is Available on request, the work is scoped and recruited to your spec rather than pulled from a library of existing hours. If you also need the wrench, socket or fixture rows around the valve, the neighbouring rows are listed with their own statuses in the first table.

Speed

How fast can a custom shut-off valve and gauge check dataset be collected?

From signed spec to first validated batch, the published timeline is a median of 48 hours where coverage is deep and three to four weeks where it is thin and contributors need to be recruited first. The site does not say which applies to the trades workshop bench, so the range that applies is confirmed when the spec is quoted. At program level, a pilot runs two to three weeks to first delivery and a standing program reaches full rate in four to six weeks.

Getting started

How do you start a pilot?

Describe the steps you need, their order, where an attempt starts and ends, what counts as complete and what the camera must see, including what must stay visible of the gauge. That becomes a written skill spec, quoted for reach, timeline and price before capture. Most programs begin with a Spec Pilot, a small, fast first batch that proves the spec before volume scales. Collections are billed per validated hour.

Capture setup

What is the capture setup for a shut-off valve and gauge check collection?

The capture setup as stated on this site. Counts of sites, contributors, episodes and hours are set in the skill spec.
PartAs stated on this site
Catalog capture modeMultiview rig + handheld grippers: a staged working set recorded by a multiview rig while the operator performs the task with handheld grippers
Instrumented tierHead-mounted stereo rig worn by the contributor; first-person RGB with metric depth recovered from the calibrated stereo rig
StreamsTen: 4K head camera, two wrist cameras, depth, IMU, 3D hand and body pose, instance segmentation, action labels
Sync and IMUHardware-triggered onto one PTP clock domain, aligned under 2 ms; 6-DoF IMU at 200 Hz
Hand pose21 joints per hand, 3D, with a per-joint visibility flag
CalibrationTwice per session; accepted only under the 0.28 px RMS reprojection gate
Capture locationFirsthand contributor settings, not a customer’s own facility
Which tier applies to this rowNot stated; confirmed in the skill spec

Every collection runs through the same seven-stage end-to-end custom collection pipeline.

Task rows

Catalog row × environment × what the catalog says × skill × capture × status

The valve row exactly as the task catalog states it, followed by five neighbouring rows from the same environment. Items the catalog does not list are marked Not stated.
Catalog rowEnvironmentWhat the catalog statesSkillCapture modeStatus
Shut-off valve + gauge checkTrades Workshop BenchOperate a shut-off valve and read the gauge.MediumMultiview rig + handheld grippersAvailable on request
Tighten bolt with wrench (nearby, context only)Trades Workshop BenchFit a wrench and tighten a bolt to snug.MediumMultiview rig + handheld grippersAvailable on request
Ratchet socket on nut (nearby, context only)Trades Workshop BenchUse a socket ratchet on nuts.MediumMultiview rig + handheld grippersAvailable on request
Drive screws with driver (nearby, context only)Trades Workshop BenchDrive screws with a power driver.MediumMultiview rig + handheld grippersAvailable on request
Hang a fixture (nearby, context only)Trades Workshop BenchLevel, mark, and screw-mount a fixture.MediumMultiview rig + handheld grippersAvailable on request
Wire an outlet (nearby, context only)Trades Workshop BenchStrip wires and land on terminals.HardMultiview rig + handheld grippersAvailable on request
Valve or gauge type, reading, dial range, pressure value, valve-position or gauge-reading labelsNoneNot stated as rowsNot statedNot statedNot stated

Page comparison

This page × the plumbing, HVAC, screwdriving and torque pages

What each page is mainly about, the catalog rows it covers, and the status and capture mode as stated on this site. Where a page covers several rows, statuses are per row; no delivered hours are claimed.
PageMain topicCatalog rows it coversStatus as listedCapture mode as listed
This page: egocentric shut-off valve and gauge check dataOperating a shut-off valve and reading the gauge at a trades workshop benchShut-off valve + gauge checkAvailable on requestMultiview rig + handheld grippers
/custom-collection/egocentric-plumbing-and-pipe-fitting-dataFirst-person plumbing and pipe fitting capture; the valve row is one of tenTen plumbing and pipe rows, including Shut-off valve + gauge checkVaries by row: Ready to deploy, Active collection or Available on requestHead-mounted phone or multiview rig for most rows; multiview rig plus handheld grippers for the valve row
/custom-collection/egocentric-hvac-service-dataFirst-person HVAC service calls; gauge sets appear in filter-service row descriptionsFive HVAC-related rows; the valve row is not one of themPer row; see the catalogPer row; see the catalog
/custom-collection/egocentric-screwdriving-and-fastening-dataFirst-person fastening at a trades workshop benchDrive screws with driver and related fastening rowsAvailable on request for the bench rowMultiview rig + handheld grippers for the bench row
/custom-collection/stereo-torque-and-bolt-fastening-dataTorque and bolt fastening framed as stereo capture on that pageFastening rows, not the valve rowPer row; see the catalogPer row; see the catalog

Capture challenges

Valve and gauge challenge × what goes wrong × stream or label that addresses it

Each challenge mapped to a stream or label this site already states. Where nothing is stated, the row says so.
ChallengeWhat goes wrongStated stream or label
Operate and read share one rowTwo things sit in one descriptionAction segments with verb and noun split each step; the skill spec names each; no operating motion or turn count is stated
Fingers behind a valve body or handleHand occlusion in manipulation3D hand pose, 21 joints per hand, with a per-joint visibility flag
Wet or reflective surfacesDepth degradesPer-frame confidence maps mask low-confidence regions; how depth behaves on a metal body or a gauge face is not stated
A dial that must stay legibleA reading needs the dial in viewNot stated: the spec says what the camera must see; no gauge-reading label is listed
The manipulated object leaves the frameThe episode loses its subjectReject if the object is out of frame for more than 15% of an episode; the spec names the manipulated object
Judging the outcome of the checkA finished check still needs a labelNot stated: no valve-position, gauge-reading or success labels are listed

Delivered vs not stated

What is delivered and what is not stated

Delivered items are stated elsewhere on this site. Items marked not stated are not promised on this page.
ItemStatusDetail
Action segmentsDeliveredstart_ns, end_ns, verb, noun, one per step
3D hand poseDelivered21 joints per hand; per-joint visibility flag for occluded fingers
Contact eventsDeliveredThe moment a hand meets an item
Per-frame instance masksDeliveredStored at 848×480
Consent and anonymization recordsDeliveredConsent artefact IDs per episode; anonymization record shipped with the data
Valve and gauge types, readings, dial range, pressure valuesNot statedAgreed in the skill spec
Valve-position, gauge-reading, open-or-closed or success labelsNot statedNot among the listed labels
Cycle times, error rates, and counts of sites, episodes and hoursNot statedSet per program in the skill spec
Force, torque or pressure readings; safety and certificationsNot statedNot among the listed streams or claims

Example footage

What does egocentric capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show a valve, a gauge or a trades bench, and it is not an example of the multiview rig with handheld grippers this row uses.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a valve or gauge clip

No valve or gauge clip is published on the site, so this is the nearest clip. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Egocentric valve operation data, answered.

What is egocentric shut-off valve and gauge check data?
Custom first-person video of a paid, consented contributor operating a shut-off valve and reading the gauge, captured to a written skill spec, with synchronized streams, hand pose and action segments.
Which catalog row covers it, and what is its status?
One row: "Shut-off valve + gauge check" in Trades Workshop Bench, described as "Operate a shut-off valve and read the gauge." It is rated Medium, listed with Multiview rig + handheld grippers, and its status is Available on request. This page claims no delivered hours.
Is there a shut-off valve dataset I can download?
No. The row is Available on request, so this is a custom collection: you write a skill spec, we quote reach, timeline and price against it, and capture runs to your accept criteria.
Does the site state a valve type, gauge type or reading?
No. The site states no valve type, gauge type, dial range, pressure value, reading or success rate for this row. Those details are agreed in the skill spec, and the footage does not come with a gauge-reading label unless the spec asks for one.
Is this stereo capture, and is it captured at my site?
The catalog lists a multiview rig with handheld grippers for this row and does not list stereo, so this page treats it as egocentric capture. The instrumented tier is a head-mounted stereo rig, and which tier applies is confirmed in the spec. Firsthand does not capture at a customer’s own facility.
How is this different from the plumbing and HVAC pages?
The plumbing page covers ten plumbing and pipe rows, and the valve row is one of them. The HVAC page covers HVAC service calls, with gauge sets in its filter-service rows. This page covers only the Shut-off valve + gauge check row.
How are people and printed markings protected?
Contributors sign a release and each episode links to it. Faces, plates and screens are blurred irreversibly at ingest, and an undocumented bystander is a reject criterion. Whether a printed marking or a gauge face is blurred is not stated and is agreed in the spec.
How fast can a fast, on-demand valve dataset arrive, and who owns it?
A median of a median of 48 hours from signed spec to first validated batch where coverage is deep, and three to four weeks where it is thin. The buyer owns the delivered data under a perpetual, non-exclusive commercial license by default, in RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata.

Sources

Where are the delivery formats on this page documented?

Request a custom shut-off valve and gauge check dataset.

Tell us the steps you need, their order, where an attempt starts and ends, what counts as complete and what the camera must see, including the gauge. We will quote reach, timeline and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.