Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Task family

Egocentric Tire Rotation and Pressure Check Data

Swapping wheels between positions, checking tire pressure with a gauge and adjusting to spec, captured first-person against a spec you write, for egocentric tire rotation data and fast, on-demand custom auto service data collection.
Streams
Ten, synced under 2 ms
Catalog status
Ready to deploy
First batch
Median 48 h
License
Buyer-owned
An automotive service bay with a car on a two-post hoist and a rolling tool chest
A service bay shown to illustrate the first-person view of wheel work. The site lists the tire rotation and pressure check row in its Auto Service Center & Tire Shop catalog environment.

Requirements

What does tire rotation and pressure check data need?

01

One named rotation and pressure sequence

The catalog row joins swapping wheels between positions, checking pressure with a gauge and adjusting to spec into one chain. A spec says where an episode starts and ends instead of relying on a generic tire service label.

02

The wheel, the gauge and both hands in frame

Rotation is a chain of carry, position, fit, read and adjust. A head-mounted view keeps both hands, the wheel and the gauge visible through the whole sequence.

03

Hand pose through the carry and the check

3D hand pose with a visibility flag per joint carries the finger detail of holding a wheel and handling a gauge, which RGB video alone cannot resolve.

04

Step boundaries on the same clock

Frame-accurate action segments mark where the wheel swap ends and the pressure check begins, aligned to video and depth on one hardware clock, so a policy can learn the order of the steps.

05

Rights you can ship on

A perpetual, buyer-owned commercial license backed by a documented consent chain, so a policy trained on the data can go into a product.

Why it matters

What is egocentric tire rotation and pressure check data, and why does it need its own page?

Egocentric tire rotation and pressure check data is real-world, first-person video of a person swapping wheels between positions, checking the pressure of each tire with a gauge and adjusting to spec. It is recorded from the operator viewpoint, with depth, 3D hand pose, contact events and frame-accurate action segments aligned on one hardware clock.

The task asks a lot of a manipulation policy because it is two kinds of work in one sequence. The first half is handling: carrying a wheel, positioning it and fitting it at a new position. The second half is a small, precise check: finding the valve, reading a gauge and deciding whether to adjust. A first-person view keeps the wheel, both hands and the gauge in the same frame, which is the viewpoint a robot arm with a head or wrist camera would act from.

This page treats tire rotation and the pressure check as one task in its own right. The general tire and wheel service page covers the whole family of tire rows, the dressing page covers cleaning and finishing, and the stereo page covers stereo and MCAP delivery for tire service. Here the task centres on moving wheels between positions and checking pressure with a gauge.

Catalog row

Which catalog row covers tire rotation and pressure checks?

The site lists one row for this task in its Auto Service Center & Tire Shop environment, in the Automotive & Transport sector. Its task name is "Tire Rotation & Pressure Check" and its description reads "Swap wheels between positions, check tire pressure with a gauge and adjust to spec." It is rated Medium, its status is Ready to deploy, and its capture mode is Phone (head-mounted) / multiview rig.

The site defines Ready to deploy plainly: contributors and site access are set up and capture starts once a spec is signed. It is not the same as Active collection, where recording is already running and a spec can join an existing stream, and it is not Available on request, where the work is scoped and recruited to spec when a buyer asks.

The environment lists "tire rotation" among its examples, next to a car garage, a dealership service bay, oil changes, brake work and vehicle diagnostics. The site names no shop, dealership, vehicle or brand for the row, so those details are agreed in the written spec.

The task

What does a tire rotation and pressure check episode involve?

The row names three actions in order: swap wheels between positions, check tire pressure with a gauge, and adjust to spec. An episode built on that row can cover all three as one continuous sequence, or a spec can isolate one of them, for example only the gauge check on a set of wheels already in place.

The site gives no rotation pattern, no number of wheels per episode, no vehicle type, no pressure value and no gauge type for this row. It also states no task time. Which wheels move to which positions, whether an episode covers one wheel or a full set and where an episode begins and ends are agreed in the spec rather than assumed.

The row does not describe lifting or jacking the vehicle, and this page gives no lifting, jacking or safety instruction. Wheel removal appears on the site as a step inside brake rows, which are a separate and harder task family, so the spec states what is in frame at the start of a rotation episode.

Wheel swap

How is the wheel position swap covered?

Swapping wheels between positions is handling work: lifting a wheel, carrying it, lining it up and fitting it at its new position. It is different from the machine work in the neighbouring tire rows, where the wheel sits on a tire machine or a balancer and the hands operate the equipment around it.

In a first-person view the useful detail is the grip. The hands take the weight of a wheel, steady it, set it into place and release. 3D hand pose with a per-joint visibility flag carries that detail, and contact and grasp events mark when the fingers make and break contact with the wheel. The site states 21 joints per hand for its hand-tracking output.

The site does not state a wheel size, a wheel type or a rotation pattern. If your policy needs a particular movement pattern between positions captured in a consistent order, that is written into the spec before capture begins.

Pressure check

How is the tire pressure check covered?

The pressure check is the small, precise half of the task. The row is described as checking tire pressure with a gauge and adjusting to spec. A head-mounted view keeps the gauge, the valve and both hands in frame, and a wrist-mounted camera is available alongside it for close-range detail.

The site does not state a pressure value, a gauge type or a measured reading as a standard label. It also states that screens are detected and blurred at ingest, and it does not say whether a gauge display counts as a screen. If your policy needs the reading to stay legible, decide that in the spec, so the handling is agreed before capture.

Action segments are useful for this half because the boundaries between reading and adjusting are the moments a policy has to sequence correctly. A spec can ask for reading, adjusting and re-checking as separate labelled steps, or as one.

Neighbouring rows

How is rotation different from tire dismount, balancing and dressing?

The same environment lists "Tire Dismount & Mount", described as removing the wheel, dismounting the tire on the machine and mounting and seating a new one. It also lists "Wheel Balancing", described as mounting the wheel on the balancer, spinning it, reading the result and fitting weights to the rim, and "Wheel & Tire Dressing", described as cleaning wheels and tires and applying dressing. The first two are Medium and Ready to deploy; dressing is Easy and Ready to deploy.

Each of those is its own sequence. Dismount and mount ends with a tire seated on a wheel, balancing ends with weights fitted, and dressing ends with finished surfaces. Rotation ends with wheels at new positions and a checked pressure. They share the capture mode and the Auto Service Center & Tire Shop environment, but their step order and their hand motions differ.

A spec that needs a spread of tire work can combine them, with the sequence of each defined separately. The comparison table below sets this page against the related collection pages.

Capture setup

How is tire rotation captured from a first-person view?

The catalog names a head-mounted phone or multiview rig as the capture mode for the row. A head-mounted phone records the first-person view of real work on site, and a multiview rig adds synchronized third-person angles when the spec asks for them.

A head-mounted camera keeps the carry, position and check in frame from the viewpoint a manipulation policy will see from, with a wrist-mounted camera available alongside it for close-range detail. Depth, 3D hand pose, contact events and action segments are aligned to video on one hardware clock, synced under 2 ms. Distance-invalid pixels beyond the depth sensor reliable range are flagged rather than interpolated.

The site does not state a camera count, resolution or frame rate specific to tire rotation, so those are agreed in the written spec rather than assumed. A vehicle can occlude the view in a service bay, so the second angle from a multiview rig is worth asking for.

Stereo

Is tire rotation data captured in stereo?

Not on the row as listed. The catalog names a head-mounted phone or multiview rig, and stereo applies only through the site general stereo offer: a stereo pair is agreed in the skill spec and confirmed on a Spec Pilot. This page describes egocentric capture as the catalog states it and claims no delivered stereo footage.

If you want a stereo pair and MCAP delivery for tire service, the stereo tire and wheel service page covers it. The two pages describe the same family of tire rows, so a program can start on one and move to the other without changing the task vocabulary.

Streams and labels

What does each tire rotation episode contain?

Each episode follows the same episode schema used across Firsthand custom collections: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events, and frame-accurate action segments. Instance segmentation is also stated for the automotive collection, and each episode carries one task instruction.

For tire rotation, hand pose tracks the operator through the carry and the fit, contact events mark when the fingers make and break contact with a wheel or a gauge, and action segments mark the start and end of each step. Because the labels share one clock with the video and depth, a step boundary lines up with the exact frame where it happens.

Object labels use the terms your spec sets. The skill spec decides which object classes are in scope before capture, so labels follow the vocabulary your training stack expects rather than a generic taxonomy.

Not stated

Which tire rotation and pressure check labels are not stated?

Pressure values, gauge types, rotation patterns, wheel counts per episode, vehicle or tire types, task times, throughput, force or tactile data, a task-completion label and any safety certification are not stated anywhere on the site as standard fields.

If your policy needs any of these, they are defined in the written spec as annotation depth, and the quote covers them before capture begins. The page does not promise them by default, and it makes no safety or certification claim.

Depth and light

How does depth hold up around a vehicle?

The site states that its automotive dataset holds a large share of cluttered and low-light work and that under-vehicle capture is hostile to infrared depth, because painted and oily surfaces absorb the projector pattern. Those episodes carry a depth-quality flag instead of being silently interpolated.

That applies to the same family of work this page covers. Wheels and tires near a vehicle put surfaces in frame that depth sensors find hard, so a spec can ask for the depth-quality flag to be delivered with each episode and for the second angle to cover moments when the vehicle blocks the view.

The site does not state a depth accuracy figure specific to tire rotation. Any such requirement is defined in the spec.

Environments

Where is tire rotation captured?

The catalog places the row in its Auto Service Center & Tire Shop environment. The site separately describes its automotive dataset as captured in working service bays rather than a staged mock-up, with a tyre bay among the listed bays next to a lift bay, engine bay work and under-vehicle work on a lift.

Because the row is Ready to deploy, contributors and site access are set up and capture starts once a spec is signed. The site names no shop, dealership, vehicle or brand, and it does not state capture at a customer own facility. Environment, access and schedule are agreed in the written spec.

Delivery

How is tire rotation data labeled and delivered?

Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd. The first three are the training-loader formats; HDF5 and zarr carry arrays for custom pipelines, and Rerun .rrd gives a multi-stream synchronized playback file for review. The format table below sets each against what its official documentation states.

Converter source is readable, so you can retarget the schema to your own loader, and the episode schema page lists the fields. Tire rotation episodes use the same schema as every other Firsthand collection, so a loader that already reads another Firsthand dataset reads this one without changes.

Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch.

Privacy

How is contributor privacy handled?

Every episode links to a signed contributor release through a documented consent chain, and the consent record is part of the delivery. Contributors are the people who rotate the wheels and check the pressure, so their release covers the footage captured of their hands and workspace.

Faces, plates and screens are detected and irreversibly blurred at ingest, and a reviewer confirms the result before anything ships. The site states that licence plates and VIN plates in service-bay footage are blurred at ingest without exception, and the anonymization record is delivered with the data.

Text on a tire sidewall is not listed as a blur category on the site, so this page does not claim it is blurred. If that text matters for your use, raise it in the spec so the handling is agreed before capture.

Fast · on demand · at scale

How fast can a custom tire rotation dataset be collected?

Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that timeline up front. The catalog status tells you which case you are in, and the tire rotation row is currently Ready to deploy.

On-demand top-ups run against the same spec and accept criteria after each training run, so new tire rotation data stays consistent with what you already hold. The site does not state a batch size or a later-batch turnaround, so those are quoted against your spec.

This is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. The site states no provider counts, hours or throughput for this task, and none are claimed here.

The spec

How do you start a pilot?

You describe the wheels, positions, gauge handling and sequence your policy needs. We turn that into a written spec covering tasks, environments, capture tier, annotation depth and accept criteria, then quote reach, timeline and price against that document before any capture begins.

A Spec Pilot, a small and fast first batch, can prove the spec and the accept criteria before you scale volume. The collection runs through the same seven-stage end-to-end custom collection pipeline as every Firsthand program: contributor recruiting, capture, per-batch QA, anonymization and licensed delivery. Billing is per validated hour, a reject log ships with every batch, and rejected items are recaptured at our cost.

Rights

How is tire rotation data licensed?

Every custom collection ships under a perpetual, buyer-owned commercial license, and exclusivity is available so the data is never resold. The license is documented alongside the consent chain, so a policy trained on the data can go into a product.

At a glance

What you get.

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

What the site states

What does the site state about tire rotation and pressure checks?

Where the task appears on this site, what each place states and how this page uses it.
Where it appearsWhat the site statesUsed on this page as
Task catalog, Auto Service Center & Tire ShopA row named Tire Rotation & Pressure Check: swap wheels between positions, check tire pressure with a gauge and adjust to specThe stated task
Environment examplesExamples include tire rotation next to a car garage, a dealership service bay, oil change, brake work and vehicle diagnosticsContext for the setting
Task catalog, neighbouring tire rowsRows for tire dismount and mount, wheel balancing and wheel and tire dressing in the same environmentNeighbouring work, not this task
Task catalog, brake rowsWheel removal appears as a step inside brake pad and rotor serviceNeighbouring work, not this task
Task catalogNo pressure value, gauge type, rotation pattern or vehicle type is statedNot stated; scoped in the written spec

Catalog rows

Which catalog row covers tire rotation, and what sits next to it?

The rotation row and its neighbours in the Auto Service Center & Tire Shop environment, with the catalog description, skill rating and status as listed. All use the head-mounted phone or multiview rig capture mode.
Task familyCatalog task and descriptionSkillStatus
Rotation (this page)Tire Rotation & Pressure Check: swap wheels between positions, check tire pressure with a gauge and adjust to specMediumReady to deploy
Tire changeTire Dismount & Mount: remove the wheel, dismount the tire on the machine and mount and seat a new oneMediumReady to deploy
BalancingWheel Balancing: mount the wheel on the balancer, spin it, read the result and fit weights to the rimMediumReady to deploy
DressingWheel & Tire Dressing: clean wheels and tires and apply dressing to the rubber and wheel facesEasyReady to deploy

Capture setup

How are tire rotation episodes recorded?

The capture mode named in the catalog for the row and what each camera adds.
Capture modeWhat the site says it recordsWhere it applies
Phone (head-mounted) / multiview rigA head-mounted phone records the first-person view of real work on site; a multiview rig adds synchronized third-person angles when the spec asks for themThe Tire Rotation & Pressure Check row
Head-mounted cameraKeeps the carry, position and check in frame from the viewpoint a manipulation policy acts fromAll episodes
Wrist-mounted cameraAvailable alongside the head camera for close-range detailStated as an option; per-task use set in the spec
Multiview angleAdds a second view for moments when the vehicle blocks the first-person viewSet in the spec
Stereo pairApplies only through the site general stereo offer: agreed in the skill spec and confirmed on a Spec PilotNot stated on the row

Streams and labels

What does each episode carry, and what is not stated?

Streams and labels the site states for Firsthand custom collections, and tire rotation fields the site does not state.
ItemStatus on this siteWhy it matters for tire rotation
Head and wrist RGB, depthStated; ten streams synced under 2 msKeeps the wheel, the gauge and the hands on one timeline
3D hand pose with per-joint visibilityStated; 21 joints per handCarries the grip on a wheel and the handling of a gauge
Contact and grasp eventsStatedMarks when the fingers make and break contact with a wheel or gauge
Action segmentsStated; frame-accurateMarks the swap, the reading and the adjustment as separate steps
Task instructionStated; one per episodeNames the sequence the episode shows
Depth-quality flagsStated for IR-hostile automotive episodesFlags surfaces that depth sensors find hard
Pressure values, gauge types, rotation patternsNot statedDefined in the spec if the policy needs them
Vehicle or tire types, wheel countsNot statedDefined in the spec
Task times, throughput, force or tactile dataNot statedDefined in the spec if the policy needs them
Task-completion label, safety certificationNot statedNo such claim is made on this page

Formats

Which formats carry tire rotation data?

Delivery formats stated on the site, set against what each format official documentation states where the documentation was read.
FormatWhat the official documentation statesUsed for here
RLDSA dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README)Episode-based training loaders
LeRobotLeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation)LeRobot dataset format and tooling
WebDatasetTar files in which files that belong together share a basename, split into numbered shards (WebDataset README)Sharded streaming for large training runs
HDF5 and zarrStated by Firsthand onlyArray storage for custom pipelines
Rerun .rrdStated by Firsthand onlyMulti-stream synchronized playback for review

Related pages

How is this page different from the other tire and wheel pages?

Related collection pages on this site and how their main topic differs from this one.
PageMain topicHow this page differs
Egocentric tire rotation and pressure check data (this page)The Tire Rotation & Pressure Check row: swapping wheels between positions and checking pressure with a gaugeCentres on the one row
Egocentric tire and wheel service dataThe whole family of tire and wheel rows: dismount, mount, balancing, rotation and dressingThis page narrows to rotation and the pressure check
Egocentric wheel and tire dressing dataCleaning wheels and tires and applying dressing (Easy)Surface finishing, not wheel swaps or gauge checks
Stereo tire and wheel service dataStereo pair and MCAP delivery for the tire and wheel rowsThis page describes egocentric capture as the catalog states it
Egocentric brake pad and rotor service dataBrake work, with wheel removal as a step (Hard)No brake work is covered here
Egocentric vehicle maintenance dataThe wider set of vehicle maintenance tasksThis page covers one tire task

Skill spec

What the skill spec fixes for a tire rotation and pressure check order

Spec element and where a buyer can see it in the delivery. Set per program means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Tasks and orderWhether an episode is the wheel swap, the pressure check or both, and where each starts and endsEpisode boundaries and action segments; set per program
Episode scopeOne wheel or a full setSet per program; the site states no episode length for this row
Rig and streamsHead and wrist views, a second angle, hand pose and any othersThe channels you can read; confirm on the Spec Pilot
Gauge readingWhether the display must stay legibleBlurring of screens in the delivery; set per program
Step labelsWhether swap, read and adjust are separate labelled stepsAction segments; set per program
Object definitionWhether a wheel, a valve or a gauge counts as the objectContact events; set per program
Delivery formatHow the data is packagedRLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people, plates and screens in frame are protectedFaces, plates and screens blurred at ingest
LicenseWho owns the datasetPerpetual, buyer-owned commercial license; exclusivity available

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format example: a first-person view with hands in frame and faces blurred. It does not show tire rotation or a pressure check.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a tire rotation clip

No tire rotation or pressure check clip is published on the site, so this is labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric tire rotation data, answered.

What is egocentric tire rotation and pressure check data?
It is real-world, first-person video of a person swapping wheels between positions, checking tire pressure with a gauge and adjusting to spec, captured against a written spec with 3D hand pose, depth and action segments. Firsthand handles contributors, capture, QA, consent, and delivery.
Which catalog row covers it, and what is its status?
The Tire Rotation & Pressure Check row in the Auto Service Center & Tire Shop environment: "Swap wheels between positions, check tire pressure with a gauge and adjust to spec." It is Medium and Ready to deploy, with a head-mounted phone or multiview rig as the capture mode.
Is the data captured in stereo?
Not on the row as listed. Stereo applies only through the site general stereo offer, agreed in the skill spec and confirmed on a Spec Pilot, and this page claims no delivered stereo footage. The stereo tire and wheel service page covers stereo and MCAP delivery.
Does the site state pressure values, gauge types or a rotation pattern?
Not stated. The site lists no pressure value, gauge type, rotation pattern, wheel count, vehicle or tire type, task time or safety claim for the row, so ask for any such label in the written spec.
Will the gauge reading be legible in the video?
Not stated. The site says screens are detected and blurred at ingest and does not say whether a gauge display counts, so decide in the spec whether the reading must stay legible.
How is this different from the general tire and wheel service page?
The general page covers the whole family of tire rows, including dismount, mount, balancing and dressing. This page narrows to the rotation and pressure check row, with the same streams, labels and formats.
How are plates and privacy handled?
Faces, plates and screens are detected and irreversibly blurred at ingest, licence plates and VIN plates in service-bay footage without exception, and a reviewer confirms the result before anything ships. Each episode links to a signed contributor release.
How fast can a custom tire rotation dataset be collected?
Where coverage is deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, and a Spec Pilot can prove the spec first. The row is currently Ready to deploy.

Sources

Where are the delivery formats documented?

Request a custom tire rotation and pressure check dataset.

Tell us the wheels and positions, whether an episode covers one wheel or a full set, how the gauge is handled, whether the reading must stay legible and the streams you want in the delivery. We will quote reach, timeline and price against a written spec, with a first validated batch in a median of 48 hours where coverage is deep.