Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Clamp and glue joint

Stereo Clamp and Glue Joint Data

Gluing a joint and clamping it square is a short, ordered, two-handed job at a workshop bench, and the joint, the clamps and the hands keep covering one another. This page covers the stereo and container side of clamp and glue joint robot training data for the one catalog row that names this work: what a calibrated stereo pair adds to stereo wood glue-up video, what MCAP is according to its own documentation, and what the site does not state. We run custom workshop data collection fast and on demand against a spec you write, as a handheld gripper joinery dataset when the spec names it, delivered as MCAP, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
"Clamp + glue joint"; Medium; Available on request
Environment
Trades Workshop Bench
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Why stereo and MCAP here

What do a stereo pair and an MCAP file add to glue-up video?

01

A joint, clamps and hands in one frame

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the hands, the parts and the clamps sit in one frame. The site gives no depth accuracy figure for this row and does not say how depth behaves on a clamped joint.

02

Fingers hidden behind a part or clamp, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger hidden behind a clamp is marked as hidden rather than silently filled in.

03

Glue, clamp and square as separate steps

The row words the work as gluing and clamping a joint square. Action segments carry start_ns, end_ns, verb and noun, so each step can be its own labeled span. Which verbs and nouns are used is set in the skill spec.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo clamp and glue joint data?

It is first-person video of a person gluing a joint and clamping it square, recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: clamp and glue joint robot training data, stereo wood glue-up video, a handheld gripper joinery dataset, or custom workshop data collection at scale. They describe one request from different angles. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The site does not state that stereo is already running on this row. The catalog lists a multiview rig with handheld grippers as the capture setup, so a stereo pair is a capture choice agreed in the skill spec through the site’s general stereo offer and confirmed on a Spec Pilot. The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page rely on, and what is its status?

One, listed in lib/commercial-catalog-data.ts. "Clamp + glue joint" sits in the Trades Workshop Bench environment of the Construction & Trades sector, which the catalog describes as a "Workshop bench with hand and power tools: wrenches, drivers, drill, saw, clamps, fasteners". Its description reads "Glue and clamp a joint square." It is rated Medium, lists the capture setup "Multiview rig + handheld grippers", and its status is Available on request.

Available on request means the work is scoped and recruited to a buyer’s spec when the buyer asks. It is not a statement that active collection is running or that stereo footage of this task has been delivered, and the site states no delivered hours or stereo clips for it, so this page claims none. The first table below reproduces the row exactly as the catalog states it. The site does not describe a joint type, a glue type, a clamp type, a wood, a squareness tolerance or an open time for the row, so none is stated here.

Nearby rows

Which other catalog rows mention glue and clamps?

Two rows in the Carpentry & Furniture Workshop mention the same materials inside a longer job. "Assemble and join furniture frames using wood glue, clamps, and a drill" reads "Glue and clamp frame joints, drill pilot holes and screw the furniture frame together." It is rated Medium, listed with Phone (head-mounted) / multiview rig, and its status is Active collection. "Veneer Lamination & Pressing" reads "Cut veneer sheets, spread adhesive, position them on the substrate and press them flat." It is rated Hard, listed with Phone (head-mounted) / multiview rig, and its status is Ready to deploy.

These are whole jobs, not the glue-and-clamp step on its own, and they carry different capture setups and statuses from the Trades Workshop Bench row. They are context only. Check the status of any nearby row before relying on it. The Clamp + glue joint row is Available on request, not Active collection or Ready to deploy.

Difference

How is this different from the egocentric, carpentry, restoration and veneer pages?

This page is the stereo and MCAP treatment of the Clamp + glue joint row. The egocentric clamp and glue joint page covers the same row as first-person video, without stereo and MCAP as its subject, and it states that the catalog does not list stereo for the row. Other pages cover different tasks, and their rows are listed separately in the catalog.

The stereo carpentry and framing page covers five carpentry and framing rows that measure, mark, cut and fit lumber and panels, all listed with a head-mounted phone or multiview rig. The stereo veneer lamination and pressing page covers "Veneer Lamination & Pressing", which cuts veneer sheets, spreads adhesive and presses them flat, rated Hard and Ready to deploy. The stereo furniture restoration and refinishing page covers "Furniture restoration" in the Repair Shop environment, which strips old finish, repairs joints and veneer, sands and refinishes the piece, rated Hard and Available on request. None of those is the glue-and-clamp step on its own. The second table below sets the pages side by side.

Capture setup

What capture setup does the row list, and where does stereo come in?

The catalog lists "Multiview rig + handheld grippers" for the row. The site describes that mode as a staged working set recorded by a multiview rig while the operator performs the task with handheld grippers, so demonstrations map onto a robot end effector. It does not explain the grippers further, does not state a camera count for the row and does not describe this task as stereo capture. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The site also states that Firsthand does not capture at a customer’s own facility, so the setting is agreed in the spec.

The site describes two stereo setups and does not say which one an order for this row uses. The hard-environments stack is a global-shutter 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, a depth sensor at 848×480 and 30 fps, and 200 Hz 6-DoF IMUs. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. Whether a stereo pair is worn, mounted or combined with the multiview rig and grippers named in the catalog is Not stated.

Why stereo

Why capture a clamp and glue joint in stereo?

The task is a joint held square: the parts, the glue and the clamps all occupy the same small space, and the hands work right beside them. A stereo pair recovers depth from the calibrated frame pair rather than from a standalone depth sensor, so the geometry sits in the same capture that shows the hands working. The site gives no depth accuracy figure for this row, so what a buyer does with that depth is their pipeline’s question.

A stereo pair adds depth, not a verdict. The site lists no squareness, joint-quality or glue-line label for this row, and none is claimed. The egocentric clamp and glue joint page already supplies the first-person framing and the row facts; stereo is the addition for a buyer who wants the depth and the MCAP file.

Steps

Which steps of a glue-up can a stereo spec label?

The row words three actions in one description: glue, clamp and square. A spec that says "do the glue-up" gives one long action segment. A spec that names the steps gives a sequence you can slice by step. Action segments carry start_ns, end_ns, verb and noun, so each step can be its own labeled span, and which verbs and nouns are used is set in the skill spec.

Whether gluing and clamping are one segment or two, and whether "square" is a step or a state, is a spec decision, not a default. The site does not set an episode length, so the spec says whether one episode is one joint, one glue-up or the whole run from glue to a clamped, squared joint. Contact events can mark when a hand meets an item, where the spec asks for them, and the spec decides what counts as the item, including whether a part, a clamp or the assembly qualifies.

Occlusion

What do the hands and the clamps do to visibility?

Hands closing a clamp and a clamp sitting on a joint both put something between the lens and the work. The site states that the hands occlude the work and that fingers disappear behind objects in manipulation. That is why each hand joint carries a visibility flag, why contact events mark when the hand meets the item, and why instance masks are recorded per frame. It also states that reach and grasp frames are where blur and occlusion show up, and the head camera in the hard-environments stack is global-shutter, which avoids rolling-shutter skew.

The site does not say whether a clamp hides the joint from a given view, and it does not say how hand pose is recorded when the operator holds grippers instead of bare hands. The row lists a multiview rig, but the site states no camera count or layout for it. If your policy depends on those frames, say so in the spec and settle it on a Spec Pilot.

Surfaces and light

What does the site say about glare, lighting and wet or reflective surfaces?

The site states that glare-heavy and low-texture scenes make single-frame depth worse, and that depth degrades on wet and reflective surfaces, with per-frame confidence maps masking low-confidence regions. Glue on a joint may be wet, but the site does not say how depth behaves on one, and a lighting setup for this row is Not stated.

Where a program needs a specific bench layout, lighting or background, that goes into the spec and is checked on a Spec Pilot. An episode is rejected when more than 35 percent of depth pixels in the manipulation region are invalid, and for this job the spec decides what the manipulation region is at each step.

Safety and privacy

What does the site say about safety, compliance and privacy?

This page describes the hand work named in the catalog row, and nothing beyond it. It gives no glue-handling, clamping, ventilation, protective-equipment, tool or workshop-safety guidance and makes no certification claim. All of those are Not stated for this row, and the page offers no joinery technique advice. The data carries no force, pressure or squareness measurement.

For every delivered episode the site states that faces and screens are blurred irreversibly, that a reviewer confirms no un-consented person is identifiable, and that footage that cannot be de-identified is discarded. The anonymization record ships with the data, an undocumented bystander is a stated reject criterion, and every episode links to a signed contributor release. Workshops can have other people nearby, so settle bystander handling in the spec. Whether a printed label on a part is blurred is not stated and is agreed in the spec. This is not legal advice, and the executed agreement controls.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of glue-up data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For this row the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch. The stream-map table below sets each stream beside what the site states about it.

Failure modes

What goes wrong when you record a glue-up in stereo, and what does QA reject?

Hand occlusion by a part or clamp is the first risk, under the visibility flag above. Weak depth on glare-heavy, wet or reflective surfaces is the second, and the behaviour on a glued joint is Not stated. Calibration is measured at the start and end of every session under a 0.28 px RMS gate, and an episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for an undocumented bystander or for a mismatch against the named skill spec.

A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. For a glue-up, the spec decides what the manipulated object is: the joint, a clamp or the assembly being worked.

Scale and speed

How fast can custom stereo glue-up data be collected at scale?

No listed off-the-shelf dataset names clamping or gluing a joint, so this work is custom collection, not an off-the-shelf purchase. The off-the-shelf stereo and hand-tracking video can still show the format before you write a spec. Because the row is Available on request, it is scoped and recruited to your spec rather than pulled from a library of existing hours.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. Where coverage is deep, the median time from signed spec to first validated batch is 48 hours; where it is thin, turnaround runs three to four weeks. The site does not say which applies to the trades workshop bench, so the timeline is quoted against your spec. At program level, a pilot runs two to three weeks to first delivery and a standing program reaches full rate in four to six weeks. Collections are billed per validated hour, and rejected episodes and recaptures are never billed.

Delivery and license

Which formats and license come with a stereo clamp and glue order?

Delivery is MCAP, alone or beside the formats your stack already reads: RLDS, LeRobot, WebDataset, HDF5 or zarr, or raw streams with metadata. Readable converter source ships alongside the data so the schema can be retargeted to your own loader.

The license is perpetual, irrevocable and worldwide, with the data buyer-owned and non-exclusive by default. Training, evaluating, fine-tuning and deploying models, including commercial ones, is permitted, and exclusivity is available as a separate term. The executed agreement controls. The site does not publish a price list, a minimum order or a batch size for this task, so those are set in your quote.

Ordering

How do you order a stereo clamp and glue joint dataset?

Describe the steps and where each starts and ends: gluing, clamping and bringing the joint square. Say whether an episode covers one joint, one glue-up or a run from glue to a clamped joint, what counts as the object and what counts as a finished step, the privacy rule for the space, and name the variation your pipeline is missing. Then name the streams you want in the file, the topic naming and message encoding your reader expects, whether calibration ships inside the file or beside it, and whether MCAP is the only delivery or sits beside a training format.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. The last table below shows what each spec element decides.

At a glance

What you get.

Catalog row: Clamp + glue joint
"Clamp + glue joint" (Trades Workshop Bench, Construction & Trades); Medium; Available on request
Catalog description
"Glue and clamp a joint square."
Catalog capture setup
Multiview rig + handheld grippers. The site states no stereo pair for this row, so a stereo pair is agreed in the skill spec through the general stereo offer
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Joint, glue, clamp and wood types, squareness tolerance, open time, task times, error rates
Not stated; agreed in the skill spec
Glue handling, clamping or workshop safety
Not stated; nothing here is safety guidance
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers clamp and glue joint work, and what is its status?

One row from lib/commercial-catalog-data.ts, reproduced as the catalog states it. The environment is described as a "Workshop bench with hand and power tools: wrenches, drivers, drill, saw, clamps, fasteners".
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Clamp + glue jointGlue and clamp a joint square.Trades Workshop BenchMediumMultiview rig + handheld grippersAvailable on request

Compared pages

How does this page differ from the egocentric, carpentry, restoration, veneer and MCAP pages?

Each page and the catalog rows it covers. Statuses are as the site lists them; none of these pages is claimed to hold delivered hours here.
PageWhat it coversRow status as listedRelation to this page
This page: stereo clamp and glue joint dataClamp + glue jointMedium, Available on requestStereo pair and MCAP delivery for the glue-and-clamp step
Egocentric clamp and glue joint dataThe same row as first-person videoMedium, Available on requestThe first-person page for the same row; stereo and MCAP are not its subject
Stereo carpentry and framing dataFive carpentry and framing rows: measuring, marking, cutting and fitting lumber and panelsPhone (head-mounted) / multiview rig on all five rowsDifferent tasks; cutting and framing, not glue-up
Stereo veneer lamination and pressing dataVeneer Lamination & Pressing: cut veneer sheets, spread adhesive, position them on the substrate and press them flatHard, Ready to deployDifferent task; a Carpentry & Furniture Workshop row
Stereo furniture restoration and refinishing dataFurniture restoration (Repair Shop): strip old finish, repair joints and veneer, sand and refinish the pieceHard, Available on requestDifferent task; a whole repair job, not the glue-and-clamp step
Egocentric stereo data in MCAPThe stereo and MCAP hub across tasksNot applicableGeneral stereo and MCAP treatment; not specific to glue-up work

Stated vs not stated

What the site states about stereo capture for clamp and glue joint work

Left to right: the item, what the site states, and what that means for a glue-up order. “Not stated” means the site does not say.
ItemWhat the site statesFor a clamp and glue joint order
Catalog capture setupMultiview rig + handheld grippers: a staged working set recorded by a multiview rig while the operator performs the task with handheld grippersNo stereo pair is stated for this row; a stereo pair is a spec choice through the general stereo offer
Camera count and layout of the multiview rigNot statedAgreed in the skill spec
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Hands, contacts and masksPer-joint visibility flag on hand pose; contact events; per-frame instance masks stored at 848×480Stated; what counts as the object is set in the spec
Hand pose with handheld grippersNot statedAgreed in the skill spec
Hand occlusionThe hands occlude the work and fingers disappear behind objects; visibility flags and instance masks address itStated; how often it occurs on this row is Not stated
Depth on wet or reflective surfacesDepth degrades on wet and reflective surfaces; confidence maps mask low-confidence regionsStated; behaviour on a glued joint is Not stated
CalibrationMeasured every session and shipped with the episode; 0.28 px RMS reprojection gateStated
SynchronizationHardware-triggered onto one clock; 2.0 ms cross-stream ceilingStated
Row statusMedium, Available on requestNo volume, hours or delivered stereo footage is claimed on this page
Joint, glue, clamp or wood typesNot statedNot claimed; set in the spec
Squareness, joint-quality or glue-line labelNot stated; no such label is listed for the rowNot claimed; set in the spec
Glue handling, clamping or workshop safety, certificationNot statedNot claimed on this page
Cycle time, error rate, task durationNot statedNot claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Stream map

Streams for glue-up work and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Skill spec

What the skill spec fixes for a stereo clamp and glue joint order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
RowClamp + glue joint, worded as the catalog words itSet per program; Available on request as listed
Steps and orderWhat one step is: glue, clamp, squareEpisode boundaries and action segments; set per program
Episode scopeOne joint, one glue-up or a run from glue to a clamped jointSet per program; the site does not state an episode length
Object definitionWhether a part, a clamp or the assembly counts as the objectContact events and the out-of-frame reject rule; set per program
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
Setting and lightingWhere capture runs and how the bench is litSet per program; the site states no lighting setup for this row
MCAP topics and encodingWhat your reader expectsSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people and screens in frame are handledFaces and screens blurred at ingest; other items agreed in the spec
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show gluing, clamping or a workshop bench, and it is not an example of the multiview rig with handheld grippers this row lists.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a glue or clamp clip

No clamp and glue joint clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo wood glue-up video, answered.

What is stereo clamp and glue joint data?
First-person video from two calibrated cameras of a person gluing and clamping a joint square, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
"Clamp + glue joint" in Trades Workshop Bench: "Glue and clamp a joint square." It is rated Medium, listed with Multiview rig + handheld grippers, and its status is Available on request. This page claims no delivered hours.
Is stereo already captured on this row?
Not stated. The catalog lists a multiview rig with handheld grippers for the row. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric clamp and glue joint page?
The egocentric page covers the same row as first-person video. This page adds the stereo pair and MCAP delivery. Carpentry and framing, veneer lamination and furniture restoration are separate tasks on their own pages.
Is there an off-the-shelf clamp and glue joint dataset?
No listed dataset names clamping or gluing a joint. This is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Does the data include joint, glue or squareness labels?
Not stated. The site lists no joint, glue, clamp or wood type, no squareness, joint-quality or glue-line label, and no force or pressure reading, so none is claimed. These are set in the spec.
How fast can a custom stereo glue-up dataset be collected?
From signed spec to first validated batch, a median of 48 hours where coverage is deep and three to four weeks where it is thin. The site does not say which applies to the trades workshop bench, so it is quoted against your spec.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.

Sources

Where is MCAP documented?

Request a custom stereo clamp and glue joint dataset delivered as MCAP.

Tell us the steps and where each starts and ends, whether an episode covers one joint, one glue-up or a run from glue to a clamped joint, what counts as the object, the setting and lighting, the privacy rule for the space, the streams you want in the file and whether MCAP sits alone or beside a training format. We will quote reach, timeline and price against a written spec.