Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Stereo Leather Hand-Stitching Data

Punching stitch holes and saddle-stitching leather pieces with two needles and waxed thread is one row in the site’s task catalog, rated Hard and listed Available on request. This page covers the stereo and container side of that row: what a calibrated stereo pair adds to stereo leather stitching video, what a saddle stitch robot dataset needs from the capture, what MCAP is according to its own documentation, and what the site does not state. We run custom leathercraft data collection fast and on demand against a spec you write, as a two-needle hand sewing dataset when the spec names it, delivered as MCAP, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
Hand-stitching leather goods, in the Leathercraft Workshop environment
Skill and status
Hard; Available on request, as the catalog lists them
Catalog capture setup
Phone (head-mounted) / multiview rig; stereo only through the general stereo offer
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Why stereo and MCAP here

What do a stereo pair and an MCAP file add to leather stitching video?

01

Depth for leather, holes and two needles

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the leather piece, the stitch holes, the needles and both hands sit in one frame. The site gives no depth accuracy figure for this row and does not state how depth behaves on leather or thread.

02

Fingers hidden behind the leather, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger folded behind the leather is marked as hidden rather than silently filled in.

03

Punching and stitching as separate spans

The row names two kinds of work in one line. Action segments carry start_ns, end_ns, verb and noun, so punching the holes and saddle-stitching can each be a labeled span. Which verbs and nouns are used is set in the skill spec.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo leather hand-stitching data?

It is first-person video of a person doing the work named in one catalog row, punching stitch holes and saddle-stitching leather pieces with two needles and waxed thread, recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: stereo leather stitching video, saddle stitch robot data, a two-needle hand sewing dataset, or custom leathercraft data collection at scale. They describe one request from different angles. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step. It is not a fixed corpus you download. This is custom collection. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page rely on, and what is its status?

One row, listed in lib/commercial-catalog-data.ts under the Leathercraft Workshop environment in the Creative Workshops & Crafts sector, whose examples line reads "Leather tooling, hand-stitched goods, saddlery, leather bag/wallet making". The row is named "Hand-stitching leather goods" and reads "Punch stitch holes and saddle-stitch leather pieces with two needles and waxed thread." Its Skill is Hard, its capture setup is "Phone (head-mounted) / multiview rig" and its status is Available on request. The second table below reproduces it.

This page uses the status wording the catalog gives and does not upgrade it to ready, active or ongoing collection. It claims no delivered hours and no delivered stereo footage for the row. The row names leather pieces, stitch holes, two needles and waxed thread, and nothing more specific, so anything finer goes into the skill spec.

Hard row

Why is hand-stitching leather goods rated Hard?

On this site, Hard is the skill level shown in the catalog’s Skill column, one of Easy, Medium or Hard, and this page uses the word in no other sense. The hard-task hub lists every row rated Hard, grouped by environment, and this row is in it. The other three Leathercraft Workshop rows, Leather bag and wallet making, Leather tooling and Saddlery, are also rated Hard.

What the row text itself shows is two linked kinds of work in one line, punching the holes and saddle-stitching through leather pieces, with two needles and waxed thread. The site publishes no failure rate, tolerance or claim about the skill of the people doing the work for this row, so this page makes none.

Difference

How is this different from the egocentric, stereo leathercraft and bag and wallet pages?

This page is the stereo and MCAP treatment of the one Hand-stitching leather goods row. The egocentric leather hand-stitching page covers the same row as first-person capture and does not have stereo as its subject; the hard-task hub points the row at that page, because the row lists a head-mounted phone or multiview rig, and it remains the page for the first-person framing. The stereo leathercraft page covers all four Leathercraft Workshop rows as stereo capture and MCAP delivery, so hand-stitching is one of four there and not its main topic.

The stereo leather bag and wallet making page covers a different row, "Cut leather panels, skive edges, glue and stitch them into a bag or wallet", a longer product job that includes stitching as one part. The stereo leather tooling and saddlery page covers the Leather tooling and Saddlery rows. The first table below sets these pages side by side.

Capture setup

What capture setup does the row list, and where does stereo come in?

The catalog lists "Phone (head-mounted) / multiview rig". The site does not state a stereo pair for this row, and this page does not claim the row is already captured in stereo. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The catalog does not say which of its two modes applies to a batch, so that is agreed in the spec too. The site lists capture at your own facility as not offered.

The site describes two stereo setups and does not say which one an order for this row uses. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. The hard-environments stack is a 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, depth at 848×480 and 30 fps, and a 200 Hz 6-DoF IMU. Camera count, resolution and frame rate for leather hand-stitching are Not stated.

Occlusion and depth

What do the hands, the leather and the needles do to visibility and depth?

In hand-stitching the hands sit between the camera and the work, and a needle or a stitch hole can vanish behind a finger, a closed hand or the leather piece. The site states that the hands occlude the work and that fingers disappear behind objects. That is why each hand joint carries a visibility flag, why contact events mark when the hand meets an item, and why instance masks are recorded per frame.

The site states that depth degrades on wet and reflective surfaces, with per-frame confidence maps masking low-confidence regions, and that metric depth on sub-centimetre parts is flagged rather than interpolated. Whether the leather, a needle or waxed thread counts as such a surface or part is Not stated, so a Spec Pilot checks it on real footage rather than assuming it.

Episodes

What does a stereo leather hand-stitching episode contain?

Each episode follows the Firsthand episode schema, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events and frame-accurate action segments. Hand pose is delivered as handJoints[2][21][3] in metric units in the head-camera frame, two hands of 21 joints each, with a visibility flag per joint. For this row, hand pose tracks how the fingers hold the leather and the needles, contact events mark when a finger meets an item, and action segments mark each step.

The only language data the site ties to Firsthand capture is one task instruction per episode. Object labels use the terms your spec sets. Force or tactile data, and a success or quality label for a seam, are Not stated for this row, and this page does not offer them as deliverables.

Steps

Which steps can a stereo spec label?

The row gives its work in one line, not a list of steps, so the steps come from the spec. A spec that says "stitch the piece" gives one long action segment. A spec that names the two kinds of work the row states, punching stitch holes and saddle-stitching, gives a sequence you can slice by step, each with start_ns, end_ns, verb and noun.

Whether an episode covers one piece, one step or a whole job is a spec decision, not a default, and the site sets no episode length for this row. The site names no sub-step beyond the row text, so this page gives no leathercraft procedure. What counts as a finished seam is Not stated and is written into the spec as accept criteria before capture.

Not stated

What does the site not state about stereo leather hand-stitching?

Leather types and thicknesses, thread and needle specifications, stitch lengths, spacing and counts, the tools used to punch, piece sizes, tolerances, cycle times, error rates and what a finished seam means are Not stated. No workshop, leatherworker, client, brand or customer is named for this row, and none is used here. They are set in the written spec, and this page claims none of them.

The site states no result from training any model on this data, and no safety, licensing or certification claim for the workshop rows, so this page gives no safety guidance and describes no certification.

Privacy

What does the site say about consent and privacy?

For every delivered episode the site states that faces, plates and screens are detected and irreversibly blurred at ingest, that a reviewer confirms the result before anything ships, and that footage that cannot be de-identified is discarded. The anonymization record ships with the data, an undocumented bystander is a stated reject criterion, and every episode links to a signed contributor release through a documented consent chain.

The site does not state how a workshop or the people in it are handled beyond that general rule, so who may be in frame is agreed in the spec before capture. This is not legal advice, and the executed agreement controls.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of leather hand-stitching data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For this row the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate. The fourth table below maps each stream to what the site states.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch.

Failure modes

What does QA reject in stereo leather hand-stitching capture?

Calibration is measured at the start and end of every session under a 0.28 px RMS gate. An episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for more than 35 percent invalid depth pixels in the manipulation region, for an undocumented bystander or for a mismatch against the named skill spec.

For this row, what counts as the manipulated object, the leather piece, a needle or the stitched piece, is a spec decision, and it decides how the out-of-frame rule applies. A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. The fifth table below lists each failure mode with what the site states.

Scale and speed

How do custom, fast, on-demand and off-the-shelf coverage combine for leather hand-stitching?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets, of which stereo is ~64,800 hours across 9 datasets. The site names no leather hand-stitching dataset among them, so this work is custom collection, not an off-the-shelf purchase. The off-the-shelf stereo and hand-tracking video can still show the format before you write a spec.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; where it is thin, turnaround runs three to four weeks. The row is Available on request, so the site does not say which applies, and the timeline is quoted against your spec. Collections are billed per validated hour, and rejected episodes and recaptures are never billed.

Ordering

How do you order a stereo leather hand-stitching dataset?

Describe where each attempt starts and ends: punching stitch holes, saddle-stitching leather pieces with two needles and waxed thread, or both. Say whether an episode covers one step, one piece or a whole job, what counts as the object and as a reject, the setting and lighting, and the privacy rule.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. The last table below shows what each spec element decides. The hard-task hub linked below lists every row rated Hard.

At a glance

What you get.

Catalog row
"Hand-stitching leather goods": "Punch stitch holes and saddle-stitch leather pieces with two needles and waxed thread." Leathercraft Workshop; Skill Hard; Phone (head-mounted) / multiview rig; Available on request
Catalog capture setup
The row lists no stereo pair. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Leather, thread, needles, stitch spacing, punching tools, dimensions
Not stated; agreed in the skill spec
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Compared pages

How does this page compare with the neighbouring leather pages?

Each existing page, its capture framing, the rows it covers and how it treats the Hand-stitching leather goods row, as the site lists them.
PageCaptureWhat it coversRow status as listedTreatment of the Hand-stitching leather goods row
This page: stereo leather hand-stitching dataStereo pair through the general offer; MCAP deliveryThe Hand-stitching leather goods row onlyHard; Available on requestThe whole page, in stereo
Egocentric leather hand-stitching dataEgocentric; phone or multiview rig as listedThe same row onlyHard; Available on requestThe first-person page for the row; not stereo as its subject
Stereo leathercraft dataStereo, agreed in the spec; MCAP focusAll four Leathercraft Workshop rowsAll four Hard; Available on requestOne of four rows; the whole bench in stereo
Stereo leather bag and wallet making dataStereo, agreed in the spec; MCAP focusLeather bag and wallet making: cut panels, skive edges, glue and stitch into a bag or walletHard; Available on requestNot covered; a broader product task
Stereo leather tooling and saddlery dataStereo, agreed in the spec; MCAP focusLeather tooling and SaddleryBoth Hard; Available on requestNot covered; a different task

Catalog row

Which catalog row covers leather hand-stitching, and what is its status?

One row from lib/commercial-catalog-data.ts, reproduced as the catalog states it. The row states no stereo pair.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Hand-stitching leather goodsPunch stitch holes and saddle-stitch leather pieces with two needles and waxed thread.Leathercraft WorkshopHardPhone (head-mounted) / multiview rigAvailable on request

Capture setup

What does the site state about stereo capture for this row?

Left to right: the item, what the site states, and what that means for a leather hand-stitching order. “Not stated” means the site does not say.
ItemWhat the site statesFor a leather hand-stitching order
Catalog capture setupPhone (head-mounted) / multiview rigNo stereo pair is stated for this row; a stereo pair is a spec choice through the general stereo offer
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Row statusAvailable on requestNo volume, hours or delivered stereo footage is claimed on this page
Calibration and synchronizationMeasured every session, 0.28 px RMS gate; hardware-triggered, 2.0 ms cross-stream ceilingStated
Leather, thread, needle and punching tool details; sizes; stitch lengths or countsNot statedNot claimed; set in the spec
Seam quality, task time, error rateNot statedNot claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Stream map

Streams for leather hand-stitching data and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Failure modes and QA

What goes wrong in leather hand-stitching capture, and what QA does about it

Left to right: the failure mode, what the site states, and what a buyer sees. “Not stated” means the site does not say.
Failure modeWhat the site statesWhat a buyer sees
Fingers hidden behind the leatherPer-joint visibility flag on hand pose; wrist views and a multiview angle available in the specA hidden joint flagged as hidden, not guessed
Piece or needle out of framePer-frame instance masks; episode rejected when the object is out of frame for more than 15 percent of itReject log per batch; what the object is gets set in the spec
Small partsMetric depth on sub-centimetre parts is flagged rather than interpolatedWhether a needle or thread counts: Not stated; test on a Spec Pilot
Invalid depth in the manipulation regionEpisode rejected when more than 35 percent of depth pixels are invalidReject log per batch; confidence maps ship with depth
Bystander in frameFaces, plates and screens blurred and reviewer-confirmed; undocumented bystander rejected; footage that cannot be de-identified is discardedReject log per batch; anonymization record ships with the data
Calibration driftSolved at the start and end of every session; 0.28 px RMS gateCalibration shipped with the episode
Sync breachRejected beyond the 2.0 ms ceiling for more than three consecutive framesReject log per batch
Spec mismatchRejected for a mismatch against the named skill specReject log per batch

Skill spec

What the skill spec fixes for a stereo leather hand-stitching order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
RowHand-stitching leather goods, worded as the catalog words itSet per program; Hard and Available on request
Steps and orderWhat one step is: punch the holes, saddle-stitch, or bothEpisode boundaries and action segments; set per program
Episode scopeOne step, one piece or a whole jobSet per program; the site does not state an episode length
Object definitionWhether the leather piece, a needle or the stitched piece counts as the objectContact events and the out-of-frame reject rule; set per program
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
Setting and lightingWhere capture runs and how the bench is litSet per program; the site states no lighting setup for this row
MCAP topics and encodingWhat your reader expectsSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat passes QA, including what counts as a reject and a finished seamReject log per batch
PrivacyHow people, screens and signage in frame are handledFaces, plates and screens blurred at ingest; other items agreed in the spec
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show leather stitching or any leatherwork task.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a leather hand-stitching clip

No leather hand-stitching clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo leather hand-stitching data, answered.

What is stereo leather hand-stitching data?
First-person video from two calibrated cameras of a person punching stitch holes and saddle-stitching leather pieces with two needles and waxed thread, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
One row under Leathercraft Workshop: "Hand-stitching leather goods", rated Hard, listing "Phone (head-mounted) / multiview rig" and Available on request. This page claims no delivered hours.
Is stereo already captured on this row?
Not stated. The catalog lists a head-mounted phone or multiview rig and no stereo pair. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric leather hand-stitching page?
The egocentric page covers the same row as first-person capture that is not stereo as its subject, and the hard-task hub points the row there. This page is stereo capture of the row with MCAP delivery. The stereo leathercraft page covers all four Leathercraft Workshop rows.
Is there an off-the-shelf leather hand-stitching dataset?
No listed dataset names leather hand-stitching. Stereo leather hand-stitching data is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Does the data include leather types, thread or needle specs, or safety guidance?
Not stated. The site names leather pieces, stitch holes, two needles and waxed thread in the row and lists no leather types, thread or needle specifications, stitch lengths or counts, tolerances or error rates, and gives no safety guidance, so none is claimed.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.
Is the footage anonymized and consented, and who owns it?
Every contributor signs a written release, and each episode links to it by consent artefact ID. Faces, plates and screens are blurred irreversibly, and footage that cannot be de-identified is discarded. The license is perpetual, irrevocable and buyer-owned.

Sources

Where is MCAP documented?

Request a custom stereo leather hand-stitching dataset delivered as MCAP.

Tell us where each attempt starts and ends, whether an episode covers one step, one piece or a whole job, what counts as the object, the setting and lighting, the privacy rule, the streams you want in the file and whether MCAP sits beside RLDS, LeRobot or WebDataset. We will quote reach, timeline and price against a written spec, with a first validated batch proven on a Spec Pilot.