Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Marquetry and inlay

Stereo Marquetry and Inlay Data

Cutting veneer pieces to a pattern and gluing them into a decorative inlay on a panel is a job of many separate pieces, close work and two busy hands that keep covering what they are fitting. This page covers the stereo and container side of marquetry robot training data for the one catalog row that names this work: what a calibrated stereo pair adds to stereo veneer inlay video, what MCAP is according to its own documentation, and what the site does not state. We run custom woodcraft data collection fast and on demand against a spec you write, as an egocentric decorative inlay dataset when the spec names it, delivered as MCAP, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
"Marquetry"; Hard; Available on request
Environment
Woodcraft & Carving Studio
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Why stereo and MCAP here

What do a stereo pair and an MCAP file add to veneer inlay video?

01

Depth for pieces on a flat panel

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the hands, the veneer pieces and the panel sit in one frame. The site gives no depth accuracy figure for this row and does not say how depth behaves on a glued inlay or on pieces lying flat against a panel.

02

Fingers hidden behind a piece, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger folded behind a veneer piece is marked as hidden rather than silently filled in.

03

Cutting and gluing as separate steps

The row words the job as cutting veneer pieces to pattern, then gluing them into the inlay on the panel. Action segments carry start_ns, end_ns, verb and noun, so each step can be a labeled span. Which verbs and nouns are used is set in the skill spec.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo marquetry and inlay data?

It is first-person video of a person making a decorative inlay, recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: marquetry robot training data, stereo veneer inlay video, an egocentric decorative inlay dataset, or custom woodcraft data collection at scale. They describe one request from different angles. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The site does not state that stereo is already running on this row. The catalog lists a head-mounted phone or a multiview rig as the capture setup, so a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page rely on, and what is its status?

One, listed in lib/commercial-catalog-data.ts under the Woodcraft & Carving Studio environment in the Creative Workshops & Crafts sector, whose examples line reads "Woodturning, wood carving, marquetry, furniture crafting, whittling". "Marquetry" is described as "Cut veneer pieces to pattern and glue them into a decorative inlay on a panel." It is rated Hard and listed as Available on request, with the capture setup "Phone (head-mounted) / multiview rig".

The site defines Available on request as work that a spec starts, rather than a running capture stream a spec can join. That is a statement about the catalog row, not a promise of a delivery date. The site states no delivered hours and no delivered stereo footage for this row, so this page claims none. The first table below reproduces the row beside the four other studio rows.

Difference

How is this different from the egocentric marquetry, stereo woodcraft and veneer lamination pages?

This page is the stereo and MCAP treatment of the single Marquetry row. The egocentric marquetry and inlay page covers the same row as first-person video and does not have stereo as its subject; it remains the page for the first-person framing. The stereo woodcraft and carving page covers all five studio rows with stereo and MCAP as its subject, so marquetry is one row of five there.

The veneer lamination and pressing page is a different row in a different environment: the Carpentry & Furniture Workshop row cuts veneer sheets, spreads adhesive, positions them on the substrate and presses them flat, and is listed as Ready to deploy. It is not a decorative inlay. The second table below sets the pages side by side with their status as the site lists them.

Capture setup

What capture setup does the row list, and where does stereo come in?

The catalog lists "Phone (head-mounted) / multiview rig" for the Marquetry row. The site does not state a stereo pair for it. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The catalog does not say which of its two modes applies to a batch, so the setting is agreed in the spec. The site lists capture at your own facility as not offered.

The site describes two stereo setups and does not say which one an order for this row uses. The hard-environments stack is a global-shutter 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, a depth sensor at 848×480 and 30 fps, and 200 Hz 6-DoF IMUs. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. Camera count, resolution and frame rate for marquetry are Not stated.

Steps

Which steps of the Marquetry row can a stereo spec label?

The row gives a natural cut: cut veneer pieces to pattern, then glue them into a decorative inlay on a panel. A spec that says "make an inlay" gives one long action segment. A spec that names the cutting and the gluing, and says where each starts and ends, gives a sequence you can slice by step. Whether one piece or a whole panel is one episode is a spec decision, not a default. The site sets no episode length or step count.

The site names no pattern, piece count, panel material, veneer type, adhesive or cutting tool for the row, so a spec that needs them sets them. Contact events can mark when a hand meets a piece or the panel, where the spec asks for them.

Occlusion and depth

What do the pieces and the hands do to visibility and depth?

Two hands fitting many separate pieces hide each other, and a closing hand hides joints. The site states that the hands occlude the work and that fingers disappear behind objects. That is why each hand joint carries a visibility flag, why contact events mark when the hand meets an item, and why instance masks are recorded per frame. A multiview rig can add synchronized third-person angles, and the two wrist cameras give a closer view of the hands than the head camera alone.

The site states that metric depth on sub-centimetre parts is flagged rather than interpolated, and that depth degrades on wet and reflective surfaces, with per-frame confidence maps masking low-confidence regions. How depth behaves on a glued inlay is Not stated, so a Spec Pilot checks it on real footage.

Not stated

What does the site not state about marquetry?

Patterns, piece counts, panel materials, veneer types, adhesives, cutting tools, task times, error rates, force or tactile data and what a well-fitted or finished inlay means are Not stated. No pattern, craftsperson, studio, client or brand is named for the row, and none is used here. They are set in the written spec, and this page claims none of them.

The site lists no label for fit quality, gap width, glue coverage or flatness, and no task-completion score. A lighting setup for the row is Not stated. Where a program needs a specific layout, lighting or background, that goes into the spec and is checked on a Spec Pilot.

Safety and privacy

What does the site say about safety, consent and privacy?

Cutting and adhesive safety are Not stated on the site. It states no contributor safety protocol and no trade certification for the Marquetry row, so this page describes none and gives no safety instructions. Who performs the work and under what conditions is something to raise when you scope the order.

For every delivered episode the site states that faces, plates and screens are detected and irreversibly blurred at ingest, that a reviewer confirms the result before anything ships, and that footage that cannot be de-identified is discarded. The anonymization record ships with the data, an undocumented bystander is a stated reject criterion, and every episode links to a signed contributor release through a documented consent chain. This is not legal advice, and the executed agreement controls.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of marquetry data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For this row the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch. The fourth table below sets each stream beside what the site states about it.

Failure modes

What goes wrong when you record an inlay in stereo, and what does QA reject?

Hand occlusion by the pieces is the first risk, handled by the visibility flag above. Calibration is measured at the start and end of every session under a 0.28 px RMS gate, and an episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for more than 35 percent invalid depth pixels in the manipulation region, for an undocumented bystander or for a mismatch against the named skill spec.

For an inlay, what counts as the manipulated object, a veneer piece or the panel, is a spec decision, and it decides how the out-of-frame rule applies. A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. The fifth table below lists the failure modes beside what the site states.

Scale

How do off-the-shelf coverage and custom collection combine for marquetry?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets, of which stereo is ~64,800 hours across 9 datasets. The site names no marquetry or inlay dataset among them, so this work is custom collection, not an off-the-shelf purchase. The off-the-shelf stereo and hand-tracking video can still show the format before you write a spec.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; where it is thin, turnaround runs three to four weeks. The site does not say which applies to the Marquetry row, so the timeline is quoted against your spec. Collections are billed per validated hour, and rejected episodes and recaptures are never billed.

Ordering

How do you order a stereo marquetry and inlay dataset?

Describe the two steps and where each starts and ends: cutting the veneer pieces to pattern and gluing them into the inlay on the panel. Say whether an episode covers one piece or a whole panel, what counts as the object and as a reject, the setting and lighting, and the privacy rule. Then name the streams you want in the file, the topic naming and encoding your reader expects, and whether MCAP sits beside RLDS, LeRobot or WebDataset.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. The sixth table below shows what each spec element decides.

At a glance

What you get.

Catalog row: Marquetry
"Marquetry" (Woodcraft & Carving Studio, Creative Workshops & Crafts); Hard; Available on request
Catalog description
"Cut veneer pieces to pattern and glue them into a decorative inlay on a panel."
Catalog capture setup
Phone (head-mounted) / multiview rig. The site states no stereo pair for this row, so a stereo pair is agreed in the skill spec through the general stereo offer
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Veneer, glue and tool models, pattern, piece count, panel, task times, error rates
Not stated; agreed in the skill spec
Cutting and adhesive safety
Not stated beyond the privacy steps listed below; nothing here is safety guidance
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers marquetry, and what is its status?

The Marquetry row comes first, followed by the four other Woodcraft & Carving Studio rows for context, reproduced as lib/commercial-catalog-data.ts states them. Only Marquetry is the subject of this page.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
MarquetryCut veneer pieces to pattern and glue them into a decorative inlay on a panel.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
Furniture crafting (context only)Cut, join and finish timber components into furniture pieces at the bench.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
Whittling (context only)Carve small figures and objects from a block of wood with a knife.Woodcraft & Carving StudioMediumPhone (head-mounted) / multiview rigAvailable on request
Wood carving (context only)Shape and detail wood with chisels, gouges and knives into a carved piece.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
Woodturning (context only)Mount a blank on the lathe and shape it with turning tools as it spins.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request

Compared pages

How does this page differ from the egocentric marquetry, stereo woodcraft and veneer lamination pages?

Each page and what it covers. Statuses are as the site lists them; none of these pages is claimed to hold delivered hours here.
PageCaptureWhat it coversRow status as listedRelation to this page
This page: stereo marquetry and inlay dataStereo pair through the general offer; MCAP deliveryOne row: MarquetryAvailable on request (Hard)Marquetry as the main topic, in stereo
Egocentric marquetry and inlay dataEgocentric; phone or multiview rig as listedOne row: MarquetryAvailable on request (Hard)Not stereo as its subject; the first-person page for the same row
Stereo woodcraft and carving dataStereo, agreed in the spec; MCAP focusFive studio rows: furniture crafting, marquetry, whittling, wood carving, woodturningAll five Available on request (four Hard, one Medium)The whole studio in stereo; marquetry is one row of five there
Egocentric veneer lamination and pressing dataEgocentric; phone or multiview rig as listedOne row: Veneer Lamination & Pressing, in the Carpentry & Furniture WorkshopReady to deploy (Hard)Different row and environment; sheets pressed onto a substrate, not a decorative inlay
Egocentric wood carving video dataEgocentric, not stereoTwo rows: Wood carving and WhittlingBoth Available on request (Hard and Medium)Shapes a piece; the inlay row is listed separately
Stereo woodturning and lathe dataStereo, agreed in the spec; MCAP focusOne row: WoodturningAvailable on request (Hard)Stereo too, but a turned piece, not an inlay on a panel
Egocentric stereo data in MCAPThe stereo and MCAP hub across tasksNot applicableNot applicableGeneral stereo and MCAP treatment; not specific to marquetry

Stated vs not stated

What the site states about stereo capture for marquetry

Left to right: the item, what the site states, and what that means for a marquetry order. “Not stated” means the site does not say.
ItemWhat the site statesFor a marquetry order
Catalog capture setupPhone (head-mounted) / multiview rig on the Marquetry rowNo stereo pair is stated for this row; a stereo pair is a spec choice through the general stereo offer
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Hands, contacts and masksPer-joint visibility flag on hand pose; contact events; per-frame instance masks stored at 848×480Stated; what counts as the object is set in the spec
Hand occlusionThe hands occlude the work and fingers disappear behind objects; visibility flags and instance masks address itStated; how often a piece hides the fingers is Not stated
Depth on wet and reflective surfacesDepth degrades on wet and reflective surfaces; confidence maps mask low-confidence regionsStated; behaviour on a glued inlay is Not stated
CalibrationMeasured every session and shipped with the episode; 0.28 px RMS reprojection gateStated
SynchronizationHardware-triggered onto one clock; 2.0 ms cross-stream ceilingStated
Row statusMarquetry is Available on requestNo volume, hours or delivered stereo footage is claimed on this page
Pattern, piece count, panel, veneer, glue, tools, lightingNot statedNot claimed; set in the spec
Cutting and adhesive safetyNot stated; no contributor safety protocol or trade certification for the rowNot claimed; no safety instructions are given
Task time, error rate, fit quality, gap width, flatnessNot statedNot claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Stream map

Streams for marquetry data and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Failure modes and QA

What goes wrong in marquetry capture, and what QA does about it

Left to right: the failure mode, what the site states, and what a buyer sees. “Not stated” means the site does not say.
Failure modeWhat the site statesWhat a buyer sees
Fingers hidden behind a piecePer-joint visibility flag on hand pose; wrist views and a multiview angle available in the specA hidden joint flagged as hidden, not guessed
Piece or panel out of framePer-frame instance masks; episode rejected when the object is out of frame for more than 15 percent of itReject log per batch; what the object is gets set in the spec
Small parts and thin edgesMetric depth on sub-centimetre parts is flagged rather than interpolatedWhether a given piece counts: Not stated; test on a Spec Pilot
Glued and reflective surfacesDepth degrades on wet and reflective surfaces; confidence maps mask low-confidence regionsConfidence maps ship with depth; behaviour on a glued inlay is Not stated
Invalid depth in the manipulation regionEpisode rejected when more than 35 percent of depth pixels are invalidReject log per batch
Bystander in frameFaces, plates and screens blurred and reviewer-confirmed; undocumented bystander rejected; footage that cannot be de-identified is discardedReject log per batch; anonymization record ships with the data
Calibration driftSolved at the start and end of every session; 0.28 px RMS gateCalibration shipped with the episode
Sync breachRejected beyond the 2.0 ms ceiling for more than three consecutive framesReject log per batch
Spec mismatchRejected for a mismatch against the named skill specReject log per batch

Skill spec

What the skill spec fixes for a stereo marquetry and inlay order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
RowMarquetry, worded as the catalog words itSet per program; Available on request as listed
Steps and orderWhat one step is: cutting the veneer pieces to pattern or gluing them into the inlayEpisode boundaries and action segments; set per program
Episode scopeOne piece or a whole panelSet per program; the site does not state an episode length
Object definitionWhether a veneer piece or the panel counts as the objectContact events and the out-of-frame reject rule; set per program
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
Setting and lightingWhere capture runs and how the studio is litSet per program; the site states no lighting setup for this row
MCAP topics and encodingWhat your reader expectsSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people, screens and signage in frame are handledFaces, plates and screens blurred at ingest; other items agreed in the spec
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show marquetry, veneer work or any woodcraft studio task.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a marquetry clip

No marquetry or woodcraft clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo marquetry and inlay data, answered.

What is stereo marquetry and inlay data?
First-person video from two calibrated cameras of a person cutting veneer pieces to pattern and gluing them into a decorative inlay on a panel, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
One, under Woodcraft & Carving Studio: "Marquetry", described as "Cut veneer pieces to pattern and glue them into a decorative inlay on a panel." It is rated Hard and Available on request. This page claims no delivered hours.
Is stereo already captured on this row?
Not stated. The catalog lists a head-mounted phone with a multiview rig for the row. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric marquetry and stereo woodcraft pages?
The egocentric marquetry page covers the same row as first-person video that is not stereo as its subject. The stereo woodcraft page covers all five studio rows, so marquetry is one of five there. This page is stereo capture of the marquetry row, with MCAP delivery.
Is marquetry the same as veneer lamination?
No. The Veneer Lamination & Pressing row in the Carpentry & Furniture Workshop cuts veneer sheets, spreads adhesive, positions them on the substrate and presses them flat, and is Ready to deploy. Marquetry is a separate decorative inlay row.
Is there an off-the-shelf marquetry dataset?
No listed dataset names marquetry or inlay work. Stereo marquetry data is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Does the data include patterns, fit quality or safety guidance?
Not stated. The site lists no patterns, piece counts, veneer or glue types, fit-quality labels, cycle times or error rates, and gives no cutting or adhesive safety guidance, so none is claimed. These are set in the spec.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.

Sources

Where is MCAP documented?

Request a custom stereo marquetry and inlay dataset delivered as MCAP.

Tell us the two steps and where each starts and ends, whether an episode covers one piece or a whole panel, what counts as the object, the setting and lighting, the privacy rule, the streams you want in the file and whether MCAP sits beside RLDS, LeRobot or WebDataset. We will quote reach, timeline and price against a written spec, with a first validated batch proven on a Spec Pilot.