Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Woodturning and lathe

Stereo Woodturning and Lathe Data

Mount a blank on the lathe, then shape it with turning tools as it spins: the workpiece is in motion, the tool edge sits against it and both hands steer the cut, so a single camera sees little of the contact. This page covers the stereo and container side of woodturning robot training data for the one catalog row that names this work: what a calibrated stereo pair adds to stereo wood lathe video, what MCAP is according to its own documentation, and what the site does not state. We run custom woodcraft data collection fast and on demand against a spec you write, as an egocentric bowl and spindle turning dataset when the spec names those forms, delivered as MCAP, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog row
Woodturning (Hard), in Woodcraft & Carving Studio
Status
Available on request
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Why stereo and MCAP here

What do a stereo pair and an MCAP file add to woodturning video?

01

Depth for a workpiece in motion

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the spinning blank, the turning tool and both hands sit in one frame. The site gives no depth accuracy figure for this row and does not say how depth behaves on a spinning wooden blank.

02

Fingers hidden by the tool or the blank, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger behind a tool handle or the blank is marked as hidden rather than silently filled in.

03

Two actions as separate steps

The row names two actions, mount and shape. Action segments carry start_ns, end_ns, verb and noun, so mounting the blank and shaping it can each be a labeled span. Which verbs and nouns are used is set in the skill spec.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo woodturning and lathe data?

It is first-person video of a person turning wood on a lathe, recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: woodturning robot training data, stereo wood lathe video, an egocentric bowl and spindle turning dataset, or custom woodcraft data collection at scale. They describe one request from different angles. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The site does not state that stereo is already running on this row. The catalog lists a head-mounted phone or a multiview rig as the capture setup, so a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step. It is task data, not a record of a studio, and nothing on this page is safety guidance. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog row

Which catalog row does this page rely on, and what is its status?

One, listed in lib/commercial-catalog-data.ts under the Woodcraft & Carving Studio environment in the Creative Workshops & Crafts sector, whose examples line names woodturning, wood carving, marquetry, furniture crafting and whittling. "Woodturning" is described as mounting a blank on the lathe and shaping it with turning tools as it spins. It is rated Hard and listed as Available on request, with the capture setup "Phone (head-mounted) / multiview rig".

The site defines Available on request as work that a spec starts, rather than a running capture stream a spec can join. That is a statement about the catalog row, not a promise of a delivery date. The site states no delivered hours and no delivered stereo footage for this row, so this page claims none. The first table below reproduces the row as the catalog states it, beside the four other studio rows and one pottery row for context.

Difference

How is this different from the egocentric woodturning page, stereo woodcraft and carving, and stereo table saw cutting?

This page is the stereo and MCAP treatment of the single Woodturning row. The egocentric woodturning and lathe page covers the same row as first-person video. It does not have stereo as its subject, and it remains the page for the first-person framing and the row-by-row detail.

The stereo woodcraft and carving page covers all five Woodcraft & Carving Studio rows in stereo, so woodturning is one of five rows there and the lathe is not its main topic. The stereo table saw and wood cutting page covers two cutting rows that the catalog lists as Hard and Active collection. This page is stereo capture of the lathe row alone. The second table below sets the pages side by side.

Capture setup

What capture setup does the row list, and where does stereo come in?

The catalog lists "Phone (head-mounted) / multiview rig" for the Woodturning row. The site does not state a stereo pair for it. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The catalog does not say which of its two modes applies, and the site does not state capture at a customer’s own studio, so the setting is agreed in the spec.

The site describes two stereo setups and does not say which one an order for this row uses. The hard-environments stack is a global-shutter 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, a depth sensor at 848×480 and 30 fps, and 200 Hz 6-DoF IMUs. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. Camera count, resolution and frame rate for woodturning are Not stated.

Why stereo

Why capture woodturning in stereo?

Turning is close work. The tool is in the hands for the whole task, and the blank sits right next to the tool edge. A stereo pair recovers depth from the calibrated frame pair rather than from a standalone depth sensor, so the geometry of the blank, the tool and the hands sits in the same capture that shows the fingers working.

The site does not state blank sizes, turned forms, cut depths or what a finished piece looks like, so this page makes no claim about them. A stereo pair adds depth, not a verdict on whether a piece is well turned. The site lists no surface-quality, finish or completion label for this row, and none is claimed. The egocentric woodturning page already supplies the first-person framing; stereo is the addition for a buyer who wants the depth and the MCAP file.

Spinning workpiece

What changes when the workpiece spins?

The row says the blank is shaped "as it spins", so the object being worked is in motion across the episode. The site states no lathe speed, blank size, turned form or tool list, and it does not say how a spinning blank is handled by a stereo pair or by the depth stream. How much of the blank is blurred at a given moment is Not stated.

The site also states that depth degrades on wet and reflective surfaces, and that reach and grasp frames are where blur and occlusion show up. It states no behaviour for shavings or chips, and no lighting setup for the row, so how loose material affects the picture is Not stated. If your policy depends on seeing the blank, the tool edge or a shaving clearly, say so in the spec, ask for wrist views or a multiview angle, and settle it on a Spec Pilot. The head camera in the hard-environments stack is global-shutter, which avoids rolling-shutter skew.

Steps

Which steps of the Woodturning row can a stereo spec label?

The row gives a natural cut: mount a blank on the lathe, then shape it with turning tools. A spec that says "turn the piece" gives one long action segment. A spec that names mounting and shaping gives a sequence you can slice by step. Whether each is its own segment, and whether mounting, one shaping stage or a whole piece is one episode, is a spec decision, not a default. The site does not set an episode length or a step count.

The row names neither spindles nor bowls, so which form to turn is also a spec decision. A request for bowl turning or spindle turning is settled in the written spec and confirmed on a Spec Pilot, rather than assumed from the catalog wording. Contact events can mark when a finger or a tool meets the blank, where the spec asks for them.

Occlusion

What do the hands, the tool and the blank do to visibility?

At a lathe the hands sit between the camera and the work, and a tool edge can vanish behind a finger or the blank itself. The site states that the hands occlude the work and that fingers disappear behind objects. That is why each hand joint carries a visibility flag, why contact events mark when the hand or a tool meets a surface, and why instance masks are recorded per frame.

The site states no tool sizes or counts for this row, so how often a tool leaves the view is Not stated. The site says two-handed fine motion is where occlusion bites, and a spec that needs a clear view of the tool edge or the blank should name that step, ask for wrist views or a multiview angle, and confirm it on a Spec Pilot.

Not stated

What does the site not state about wood, tools and turned pieces?

Wood species, grain, moisture, blank sizes, lathe speeds, tool brands and models, sharpening, finish products and what a correct or finished piece means are Not stated. So are cycle times, error rates and the number of passes. They are set in the written spec, and this page claims none of them.

The words "turning tools" and "lathe" are catalog wording; the site makes no tooling, quality, craftsmanship or certification claim. A lighting setup for the row is Not stated. Where a program needs a specific layout, lighting or background, that goes into the spec and is checked on a Spec Pilot. An episode is rejected when more than 35 percent of depth pixels in the manipulation region are invalid, and for this job the spec decides what the manipulation region is at each step.

Safety and privacy

What does the site say about tool safety, consent and privacy?

Tool and lathe safety is Not stated on the site. It states no contributor safety protocol, no injury-prevention guidance and no certification for the woodturning row, so this page describes none and gives no safety instructions. Who performs the work and under what conditions is something to raise when you scope the order.

For every delivered episode the site states that faces, plates and screens are detected and irreversibly blurred at ingest, that a reviewer confirms the result before anything ships, and that footage that cannot be de-identified is discarded. The anonymization record ships with the data, an undocumented bystander is a stated reject criterion, and every episode links to a signed contributor release through a documented consent chain. The site names no studio, school, workshop, city or region and lists capture at a customer’s own facility as not offered, so this page claims neither. This is not legal advice, and the executed agreement controls.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of woodturning data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For this row the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch. The fourth table below sets each stream beside what the site states about it.

Failure modes

What goes wrong when you record woodturning in stereo, and what does QA reject?

Hand occlusion by the tool and the blank is the first risk, under the visibility flag above. A spinning blank is the second, and how often it blurs is Not stated. Calibration is measured at the start and end of every session under a 0.28 px RMS gate, and an episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for an undocumented bystander or for a mismatch against the named skill spec.

A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. The fifth table below lists the failure modes beside what the site states.

Scale

How do off-the-shelf coverage and custom collection combine for woodturning?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets, of which stereo is ~64,800 hours across 9 datasets. The site names no woodturning or lathe dataset among them, so this work is custom collection, not an off-the-shelf purchase. The off-the-shelf stereo and hand-tracking video can still show the format before you write a spec.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; where it is thin, turnaround runs three to four weeks. The site does not say which applies to the woodturning row, so the timeline is quoted against your spec. Collections are billed per validated hour, and rejected episodes and recaptures are never billed.

Ordering

How do you order a stereo woodturning and lathe dataset?

Describe the two actions and where each starts and ends: mounting the blank on the lathe, and shaping it with turning tools. Say whether an episode covers mounting, one shaping stage or a whole piece, which form you want turned, what counts as the object and what counts as a finished step, the setting and lighting, the privacy rule for the studio, and name the variation your pipeline is missing. Then name the streams you want in the file, the topic naming and message encoding your reader expects, whether calibration ships inside the file or beside it, and whether MCAP is the only delivery or sits beside RLDS, LeRobot or WebDataset.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. The sixth table below shows what each spec element decides.

At a glance

What you get.

Catalog row: Woodturning
"Woodturning" (Woodcraft & Carving Studio, Creative Workshops & Crafts); Hard; Available on request
Catalog description
"Mount a blank on the lathe and shape it with turning tools as it spins."
Catalog capture setup
Phone (head-mounted) / multiview rig. The site states no stereo pair for this row, so a stereo pair is agreed in the skill spec through the general stereo offer
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Turned form, wood species, lathe speeds, tool brands, cycle times, error rates
Not stated; agreed in the skill spec
Tool and lathe safety, consent and privacy of the studio
Not stated beyond the privacy steps listed below; nothing here is safety guidance
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog row

Which catalog row covers woodturning, and what is its status?

The Woodturning row comes first, followed by the four other Woodcraft & Carving Studio rows and one Pottery & Ceramics Studio row for context, reproduced as lib/commercial-catalog-data.ts states them. Only Woodturning is the subject of this page.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
WoodturningMount a blank on the lathe and shape it with turning tools as it spins.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
Wood carvingShape and detail wood with chisels, gouges and knives into a carved piece.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
WhittlingCarve small figures and objects from a block of wood with a knife.Woodcraft & Carving StudioMediumPhone (head-mounted) / multiview rigAvailable on request
MarquetryCut veneer pieces to pattern and glue them into a decorative inlay on a panel.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
Furniture craftingCut, join and finish timber components into furniture pieces at the bench.Woodcraft & Carving StudioHardPhone (head-mounted) / multiview rigAvailable on request
Wheel throwingCentre clay on the wheel, open and pull walls and trim the finished form.Pottery & Ceramics StudioHardPhone (head-mounted) / multiview rigAvailable on request

Compared pages

How does this page differ from the egocentric woodturning page, stereo woodcraft and carving, and stereo table saw cutting?

Each page and what it covers. Statuses are as the site lists them; none of these pages is claimed to hold delivered hours here.
PageWhat it coversRow status as listedRelation to this page
This page: stereo woodturning and lathe dataOne row: WoodturningAvailable on request (Hard)Stereo pair and MCAP delivery for the lathe row
Egocentric woodturning and lathe dataOne row: WoodturningAvailable on request (Hard)Not stereo as its subject; the first-person page for the same row
Stereo woodcraft and carving dataFive Woodcraft & Carving Studio rows: furniture crafting, marquetry, whittling, wood carving, woodturningAll five Available on request (four Hard, one Medium)Stereo for the whole studio; woodturning is one of five rows there, not its main topic
Stereo table saw and wood cutting dataTwo cutting rows: panel cutting with a table saw and jigsaw, and Wood CuttingBoth Active collection (both Hard)Another stereo wood page; cutting and sawing, not the lathe
Egocentric stereo data in MCAPThe stereo and MCAP hub across tasksNot applicableGeneral stereo and MCAP treatment; not specific to woodturning

Stated vs not stated

What the site states about stereo capture for woodturning and lathe work

Left to right: the item, what the site states, and what that means for a woodturning order. “Not stated” means the site does not say.
ItemWhat the site statesFor a woodturning order
Catalog capture setupPhone (head-mounted) / multiview rig on the Woodturning rowNo stereo pair is stated for this row; a stereo pair is a spec choice through the general stereo offer
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Hands, contacts and masksPer-joint visibility flag on hand pose; contact events; per-frame instance masks stored at 848×480Stated; what counts as the object is set in the spec
Hand occlusionThe hands occlude the work and fingers disappear behind objects; visibility flags and instance masks address itStated; how often a tool or the blank leaves the view is Not stated
Depth on wet and reflective surfacesDepth degrades on wet and reflective surfacesStated; behaviour on a spinning wooden blank is Not stated
CalibrationMeasured every session and shipped with the episode; 0.28 px RMS reprojection gateStated
SynchronizationHardware-triggered onto one clock; 2.0 ms cross-stream ceilingStated
Row statusWoodturning is Available on requestNo volume, hours or delivered stereo footage is claimed on this page
Turned form (bowl or spindle), wood species, blank sizes, tool brandsNot statedNot claimed; set in the spec
Lathe speed, shavings, lightingNot statedNot claimed; set in the spec
Tool and lathe safetyNot stated; no contributor safety protocol, injury-prevention guidance or certification for the rowNot claimed; no safety instructions are given
Cycle time, error rate, finished-piece qualityNot statedNot claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Stream map

Streams for woodturning data and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Failure modes and QA

What goes wrong in woodturning capture, and what QA does about it

Left to right: the failure mode, what the site states, and what a buyer sees. “Not stated” means the site does not say.
Failure modeWhat the site statesWhat a buyer sees
Fingers hidden behind a tool or the blankPer-joint visibility flag on hand pose; wrist views and a multiview angle available in the specA hidden joint flagged as hidden, not guessed
Blank or tool out of framePer-frame instance masks; episode rejected when the object is out of frame for more than 15 percent of itReject log per batch; what the object is gets set in the spec
Reach and grasp blur and occlusionReach and grasp frames are where blur and occlusion show up; the head camera is global-shutterHow often it occurs on this row: Not stated
Spinning workpieceThe Woodturning row says the blank is shaped as it spins; no lathe speed or blur rate is statedHow often it occurs: Not stated; set in the spec
Shavings and chipsNot statedNot claimed; raise in the spec and test on a Spec Pilot
Invalid depth in the manipulation regionEpisode rejected when more than 35 percent of depth pixels are invalid; depth degrades on wet and reflective surfacesReject log per batch; confidence maps ship with depth
Bystander in frameFaces, plates and screens blurred and reviewer-confirmed; undocumented bystander rejected; footage that cannot be de-identified is discardedReject log per batch; anonymization record ships with the data
Calibration driftSolved at the start and end of every session; 0.28 px RMS gateCalibration shipped with the episode
Sync breachRejected beyond the 2.0 ms ceiling for more than three consecutive framesReject log per batch
Spec mismatchRejected for a mismatch against the named skill specReject log per batch

Skill spec

What the skill spec fixes for a stereo woodturning and lathe order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
RowWoodturning, worded as the catalog words itSet per program; Available on request as listed
Steps and orderWhat one step is: mount the blank, shape it with a turning toolEpisode boundaries and action segments; set per program
Episode scopeMounting, one shaping stage or a whole pieceSet per program; the site does not state an episode length
Turned formWhether the spec asks for a bowl, a spindle or another formSet per program; the row names no form
Object definitionWhether the blank or the tool counts as the objectContact events and the out-of-frame reject rule; set per program
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
Setting and lightingWhere capture runs and how the studio is litSet per program; the site states no lighting setup for this row
MCAP topics and encodingWhat your reader expectsSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people, screens and signage in frame are handledFaces, plates and screens blurred at ingest; other items agreed in the spec
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show woodturning or a lathe.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a woodturning clip

No woodturning or lathe clip is published on the site, so this is labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Woodturning robot training data, answered.

What is stereo woodturning and lathe data?
First-person video from two calibrated cameras of a person mounting a blank on a lathe and shaping it with turning tools as it spins, with depth and hand pose alongside.
Which catalog row covers it, and what is its status?
One, under Woodcraft & Carving Studio: "Woodturning", described as "Mount a blank on the lathe and shape it with turning tools as it spins." It is rated Hard and Available on request. This page claims no delivered hours.
Is stereo already captured on this row?
Not stated. The catalog lists a head-mounted phone with a multiview rig for the row. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric woodturning and stereo woodcraft pages?
The egocentric woodturning page covers the same row as first-person video that is not stereo as its subject. The stereo woodcraft and carving page covers all five studio rows, so woodturning is one of five there. This page is stereo capture of the lathe row, with MCAP delivery.
Can you capture bowl or spindle turning?
The catalog row names neither bowls nor spindles, and the site states no turned form. Which form to turn is a spec decision, confirmed on a Spec Pilot.
Is there an off-the-shelf woodturning dataset?
No listed dataset names woodturning or lathe work. Stereo woodturning data is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Does the data include lathe speeds, wood species or safety guidance?
Not stated. The site lists no lathe speeds, wood species, tool brands, cycle times or error rates, and gives no tool or lathe safety guidance, so none is claimed. These are set in the spec.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.

Sources

Where is MCAP documented?

Request a custom woodturning and lathe dataset delivered as MCAP.

Tell us the two actions and where each starts and ends, whether an episode covers mounting, one shaping stage or a whole piece, which form you want turned, what counts as the object, the setting and lighting, the privacy rule for the studio, the streams you want in the file and whether MCAP sits beside RLDS, LeRobot or WebDataset. We will quote reach, timeline and price against a written spec, with a first validated batch proven on a Spec Pilot.