Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Egocentric Plumbing Fixture Installation Data

Removing the old fixture and fitting a new tap, toilet or sink with wrenches and sealant, then testing, is one row in the site’s task catalog, and a second row describes the same job with pipe wrenches and sealant tape. Both are rated Hard and listed Ready to deploy. This page covers egocentric plumbing fixture installation data for those two rows: first-person tap, toilet and sink fitting video, what a pipe wrench and sealant tape robot dataset needs from the capture, and what the site does and does not state. We run custom trade service data collection fast and on demand against a written skill spec, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog rows
Plumbing Fixture Installation and the pipe wrench and sealant tape fixture row, in Trade Service Calls
Skill and status
Hard; Ready to deploy, as the catalog lists them
Catalog capture setup
Phone (head-mounted) / multiview rig
License
Perpetual, buyer-owned

Why first-person here

What does a first-person view add to tap, toilet and sink fitting video?

01

Hands, wrench and fixture in one frame

A head-mounted view keeps both hands, the wrench and the fixture in frame, close to what a robot’s onboard camera would see at the job. Hand pose, contact events and per-frame instance masks are recorded on one clock, and two wrist cameras add a closer view of the hands.

02

Fingers hidden behind the fixture, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger hidden behind a wrench or a fixture is marked as hidden rather than silently filled in.

03

Removal and fitting as separate steps

Both rows start with taking the old fixture out, by removing it or disconnecting it, and then fitting a new one. A spec can name each as its own step, so each becomes its own labeled action segment on one timeline.

04

A check at the end of the job

Both rows end with a check: test, or check for leaks. How a test is judged is not stated on the site, so a spec that wants a pass or fail label has to define it and ask for it at the start.

Definition

What is egocentric plumbing fixture installation data?

It is first-person video of a person doing the work named in two catalog rows: removing or disconnecting an old fixture, fitting a new tap, toilet or sink with wrenches and sealant or sealant tape, and testing or checking for leaks. It is recorded from their own point of view with synchronized sensor streams alongside. People reach it through several phrasings: egocentric plumbing fixture installation data, first-person tap, toilet and sink fitting video, a pipe wrench and sealant tape robot dataset, or custom trade service data collection. They describe one request from different angles.

The data is human capture. A paid, consented contributor wears the rig and performs the task to a written skill spec. It is not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step, and it is not a fixed corpus you download: none of the site’s off-the-shelf dataset descriptions names plumbing, so this is custom collection.

Catalog rows

Which catalog rows does this page rely on, and what is their status?

Two rows, both in the Trade Service Calls (Plumbing / HVAC / Electrical) environment of the Construction & Trades sector, whose examples line reads "Plumber, electrician or HVAC crew on service calls at client sites". The first is named "Plumbing Fixture Installation" and reads "Remove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test." The second is named "Remove and install plumbing fixtures using pipe wrenches and sealant tape" and reads "Disconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks." Both are rated Hard, list a head-mounted phone or multiview rig and are Ready to deploy. The first table below reproduces them.

Ready to deploy is the status the catalog gives. The catalog does not define its statuses further, and this page claims no volume, hours or delivered clips for these rows. What the status means for your region and timeline is confirmed when you request the quote. The rows name fixtures, wrenches, pipe wrenches, sealant, sealant tape and a closing test. They name nothing more specific, so anything finer goes into the skill spec.

Hard rows

Why are the fixture installation rows rated Hard?

On this site, Hard is the skill level shown in the catalog’s Skill column, one of Easy, Medium or Hard, and this page uses the word in no other sense. Both rows carry it. The hard-task hub lists every row rated Hard, grouped by environment, and these two rows are in it. In the same environment, the drain snaking rows are rated Medium, while Water Heater Replacement is rated Hard like the fixture rows.

What the row text itself shows is a sequence that ends in a check: an old fixture comes out, a new one goes in with wrenches and sealant, and the job is tested. The site publishes no failure rate, tolerance or claim about plumbers’ skill for these rows, so this page makes none.

Two rows

How do the two fixture rows differ from each other?

They describe the same family of job in different words. The first names the fixtures, a tap, a toilet or a sink, and says "wrenches and sealant". The second names the tools and materials more exactly, "pipe wrenches" and "sealant tape", and says "check for leaks" where the first says "test". Neither row says which fixture the second one covers, and neither names a fixture brand, a tool model or a sealant product.

For a buyer, the two rows are one program with two ways to word the spec. A single order can cover both, with the spec stating which fixtures, which tools and which closing check each episode contains. The second table below sets the two rows side by side.

Difference

How is this different from the plumbing and pipe fitting page and the water heater page?

The egocentric plumbing and pipe fitting page covers ten plumbing and pipe rows, of which the two fixture rows are two, alongside general plumbing, drains, water heater replacement and pipe cutting. The egocentric water heater replacement page takes one different row, Water Heater Replacement, which drains and disconnects a heater, positions the new unit and connects water and power. The stereo plumbing and pipe fitting page covers the same family as a stereo and MCAP question. None of them has fixture installation as its main topic.

This page is about the two fixture rows only, in first-person framing, which is why the hard-task hub now points both rows here. The comparison table below sets the pages side by side.

Capture setup

What capture setup do the rows list?

The catalog lists "Phone (head-mounted) / multiview rig" for both rows. The catalog describes the head-mounted phone as recording the first-person view of real work, and a multiview rig adds synchronized third-person angles when the spec asks for them. The catalog does not say which of its two modes applies to a fixture program, so that is confirmed in the skill spec. A third-person angle can be useful where the fixture is only partly visible from the head camera.

The site also describes a ten-stream instrumented tier: a head camera, two wrist cameras, a depth sensor and an IMU, with hand pose, masks and action labels. Whether a fixture program uses it is Not stated. The site does not state which homes or sites host a given row or how access is arranged, so the spec settles location and access, and the quote settles reach. The capture setup table below lists the figures the site states.

Episodes

What does each episode contain?

Each attempt is delivered as one episode. On this site the standard episode carries action segments, 3D hand pose for both hands with a per-joint visibility flag, contact events that mark when a hand meets an item, an objects list, and per-frame instance masks stored at the depth resolution of 848×480. Action segments carry a start, an end, a verb and a noun from a taxonomy the site states as 97 verbs and 512 nouns, human-reviewed.

Force, torque and tactile readings are not among the listed streams, and neither is any label for whether a fixture is fitted acceptably or a connection leaks. If your model needs one of those, say so in the spec before capture, because the site does not promise it.

Why it is demanding

What makes fixture removal and fitting demanding to capture?

The reasons come from the row text and existing site copy only. First, both rows are rated Hard in the catalog. Second, the rows describe a whole job in one line, removal, fitting and a check, so one episode can span several linked steps. Third, the site states that the hands occlude the work and that fingers disappear behind objects, which is why hand pose carries a per-joint visibility flag and why contact events mark when a hand meets an item.

The site also states that depth degrades on wet and reflective surfaces and that depth ships with a per-pixel confidence map, so a buyer can see where depth should not be trusted. Whether anything at a tap, toilet or sink counts as such a surface is Not stated, and so is a mask accuracy figure.

Steps

Which steps can a spec label?

The rows give outcomes in one line, not a list of steps, so the steps come from the spec. A spec that says "replace the fixture" gives one long action segment. A spec that names each part you want separated, such as removing or disconnecting the old fixture, fitting the new one, applying sealant or sealant tape and testing, gives a sequence you can slice by step, each with start_ns, end_ns, verb and noun.

Whether an episode covers one fixture, one step or a longer job is a spec decision, not a default. The site sets no episode length for these rows. The catalog names no sub-step beyond the row text, so this page gives no plumbing procedure. What counts as a finished fit or a passed test is Not stated and is written into the spec as accept criteria before capture.

Labels and QA

How is the data validated?

Validation runs against signed accept criteria written into the spec before capture, and a reject log ships with each batch. Episodes are machine-checked against stated reject criteria, including a sync breach, calibration drift, the manipulated object out of frame for more than 15 percent of the episode, more than 35 percent invalid depth pixels in the manipulation region, an undocumented bystander, and a mismatch against the named skill spec. A human reviewer then checks each episode.

Only footage that clears the criteria is billed as a validated hour, and rejected items are recaptured at our cost. For these rows, the spec decides what the manipulated object is: the old fixture, the new fixture, the wrench or the sealant.

Not stated

What does the site not state about fixtures, tools and results?

Fixture types, fixture and tool brands or models, sealant products, pipe sizes, pressures, torques, flow rates, leak-test criteria and what a passed check means are Not stated. They are set in the written spec, and this page claims none of them. The site states no result from training any model on this data and names no plumber, client, home, brand or customer for these rows. It states no trade licensing, code-compliance, safety or certification claim, and this page describes none.

Privacy

How are people and spaces in frame handled?

Every contributor signs a written release, and each delivered episode links to it through consent artefact IDs in the batch data card. The consent chain has six checkpoints, and a break at any one discards the footage. At ingest, automated detection finds faces, plates and screens and blurs them irreversibly. Speech is scrubbed of names, addresses and card numbers, while ambient audio is kept. A reviewer confirms that no un-consented person is identifiable in any frame, and footage that cannot be de-identified is discarded. The anonymization record ships with the data.

The site does not state how a household or the people in it are handled beyond that general rule, so who may be in frame is agreed in the spec before capture. This is not legal advice, and the executed agreement controls.

Scale and speed

How do custom, fast and on-demand collection apply to fixture installation?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets. None of the site’s off-the-shelf dataset descriptions names plumbing, so this is custom collection, not an off-the-shelf purchase.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. From signed spec to first validated batch, the timeline is a median of 48 hours where coverage is deep and three to four weeks where it is thin and contributors need to be recruited first. Which applies to these rows is confirmed when the spec is quoted rather than assumed. Collections are billed per validated hour, and the site publishes no price list, minimum order or batch size for these rows, so those are set in your quote.

Delivery

Which formats and license come with the data?

Delivery is in the format your stack already reads: RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata, with readable converter source alongside so the schema can be retargeted to your own loader.

The license is perpetual, irrevocable and worldwide, with the data buyer-owned and non-exclusive by default. Training, evaluating, fine-tuning and deploying models, including commercial ones, is permitted, and exclusivity is available as a separate term. The executed agreement controls.

Ordering

How do you order a custom plumbing fixture installation dataset?

Describe where each attempt starts and ends, what counts as a finished step, and whether an episode covers one fixture or a longer job. Add the setting and lighting, the privacy rule for the space, and the variation your pipeline is missing, such as which of a tap, toilet or sink you want. Then name the streams you want and the delivery format.

Most programs begin with a Spec Pilot, a small, fast first batch that proves the spec and accept criteria on real footage before you scale. The last table below shows what each spec element decides. For the full list of rows rated Hard, see the hard-task hub linked below.

At a glance

What you get.

Catalog row 1
"Plumbing Fixture Installation": "Remove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test." Trade Service Calls (Plumbing / HVAC / Electrical); Hard; Ready to deploy
Catalog row 2
"Remove and install plumbing fixtures using pipe wrenches and sealant tape": "Disconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks." Trade Service Calls; Hard; Ready to deploy
Catalog capture setup
Phone (head-mounted) / multiview rig, on both rows
Episode contents
Action segments, 3D hand pose for both hands with a per-joint visibility flag, contact events, objects list, per-frame instance masks stored at 848×480
Sync and calibration
Hardware-triggered onto one PTP clock domain, aligned under 2 ms; calibration twice per session under a 0.28 px RMS gate
Delivery
RLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or raw streams with metadata
Fixture types, tool and sealant products, pipe sizes, pressures, leak criteria
Not stated; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog rows

Which catalog rows cover plumbing fixture installation?

The two rows relied on by this page, with the catalog description, environment, skill, capture setup and status as listed.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Plumbing Fixture InstallationRemove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test.Trade Service Calls (Plumbing / HVAC / Electrical)HardPhone (head-mounted) / multiview rigReady to deploy
Remove and install plumbing fixtures using pipe wrenches and sealant tapeDisconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks.Trade Service Calls (Plumbing / HVAC / Electrical)HardPhone (head-mounted) / multiview rigReady to deploy

Row wording

What does each row state about the job?

Each element compared across the two rows. “Not named” means the row text does not mention it.
ElementPlumbing Fixture InstallationPipe wrench and sealant tape row
Old fixtureRemove the old fixtureDisconnect old fixtures
New fixtureFit the new tap, toilet or sinkFit new ones; fixture types not named
ToolsWrenchesPipe wrenches
Sealing materialSealantSealant tape
Closing stepTestCheck for leaks
Skill and statusHard; Ready to deployHard; Ready to deploy
Brands, models, sizes, pressuresNot namedNot named

Compared pages

How does this page differ from the neighbouring plumbing pages?

Each page, its main topic and how it treats the two fixture rows. “Not covered” means the page leaves it out.
PageMain topicCapture framingTreatment of the fixture rows
This page: egocentric plumbing fixture installation dataThe two fixture installation rows onlyFirst-person, head-mounted phone or multiview rig as the catalog lists itThe whole page: scope, limits, labels, steps and ordering
Egocentric plumbing and pipe fitting video dataTen plumbing and pipe rows across five environmentsFirst-personTwo of ten rows, listed in a task catalog table
Egocentric water heater replacement dataOne row, Water Heater ReplacementFirst-personNot covered; named as a neighbouring Hard row in the same environment
Stereo plumbing and pipe fitting dataSix plumbing and pipe rows in four environmentsStereo pair and MCAP containerTwo of six rows, treated as a stereo and MCAP question
Egocentric drain snaking and clearing dataThe drain rowsFirst-personNot covered; drain rows are rated Medium
Hard task data collectionEvery catalog row rated Hard, grouped by environmentAs each row lists itBoth rows listed in the hub table with status and capture setup

Capture setup

What is the capture setup for a fixture installation collection?

The capture setup as stated on this site. Counts of sites, contributors, episodes and hours are set in the skill spec.
PartAs stated on this siteFor these rows
Catalog capture modeHead-mounted phone for the first-person view of real work; a multiview rig adds synchronized third-person angles when the spec asks for themStated in the catalog; which mode applies is confirmed in the skill spec
Head cameraGlobal-shutter 4K at 60 fps with a 120 degree lensStated for the instrumented tier; use is Not stated
Wrist camerasTwo wrist-mounted cameras at 1080p and 60 fpsStated for the instrumented tier; use is Not stated
Depth and IMUDepth at 848×480 and 30 fps with per-frame confidence maps; 6-DoF IMU at 200 HzStated for the instrumented tier; use is Not stated
SyncTen streams, hardware-triggered onto one PTP clock domain; aligned under 2 msStated
Hand pose21 joints per hand, 3D, in metres in the head-camera frame; per-joint visibility flagStated
CalibrationTwice per session; accepted only under the 0.28 px RMS reprojection gateStated
SettingWhich homes or sites host a given row is not statedSetting agreed in the skill spec

Demands and streams

Which stated challenge maps to which stream or label?

Each challenge mapped to a stream or label this site already states. Where nothing is stated, the row says so.
ChallengeWhat the site statesStated stream or label
Fingers hidden behind a fixture or wrenchThe hands occlude the work; fingers disappear behind objects3D hand pose with per-joint visibility flags; reject if the object is out of frame for more than 15% of an episode
Old and new fixtures and loose parts across a long jobInstance masks track object IDs per framePer-frame instance masks stored at 848×480
Hand meets wrench, fixture or sealantHand and work are in close contactContact events mark when a hand meets an item; no finer contact label is stated
Fixture only partly visibleA multiview rig adds synchronized third-person angles when the spec asks for themCapture mode agreed in the spec; wrist cameras add a closer view of the hands
Depth near wet or reflective surfacesDepth degrades on wet and reflective surfacesPer-pixel depth confidence map; more than 35% invalid depth pixels in the manipulation region is a reject
Fit quality or leak resultNo such label is listedNot stated: completion is defined in the spec and episode boundaries
Force, torque and contact pressureNo force or tactile stream is listedNot stated

Delivered vs not stated

What is delivered and what is not stated?

Delivered items are stated elsewhere on this site. Items marked not stated are not promised on this page.
ItemStatusDetail
Action segmentsDeliveredstart_ns, end_ns, verb, noun, one per step
3D hand poseDelivered21 joints per hand; per-joint visibility flag for occluded fingers
Contact eventsDeliveredThe moment a hand meets an item
Per-frame instance masksDeliveredStored at 848×480
Consent and anonymization recordsDeliveredConsent artefact IDs per episode; anonymization record shipped with the data
Fixture types, tool and sealant productsNot statedAgreed in the skill spec
Pipe sizes, pressures, torques, flow ratesNot statedNo such figure is listed
Number of sites, episodes and hoursNot statedSet per program in the skill spec
Fit quality and leak-test result labelsNot statedNo such label is listed

Delivery and licensing

What is delivered, in which formats, and under what license?

Delivery and licensing terms as stated on this site. “Set per program” means the site states no fixed value.
ItemAs stated on this siteNote
FormatsRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd, or raw streams with metadataChosen in the skill spec; converter source ships with the data
LicensePerpetual, irrevocable, worldwide, buyer-owned, non-exclusive by defaultExclusivity is available as a separate term; the executed agreement controls
BillingPer validated hourRejected items are recaptured at our cost
PrivacyFaces, plates and screens blurred irreversibly; footage that cannot be de-identified is discardedAnonymization record delivered with the data
Timelinea median of 48 hours to first validated batch where coverage is deep; three to four weeks where thinWhich applies to these rows is Not stated; quoted against your spec
Price, minimum order, batch sizeNot published for these rowsSet in your quote

Skill spec

What does the skill spec fix for a fixture installation order?

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
Fixtures in scopeWhether a tap, a toilet, a sink or a mix is in scopeWhat the cameras see; set per program
Steps and orderWhat one step is and how steps are named, such as removal, fitting, sealing and testingEpisode boundaries and action segments; set per program
Episode boundaryOne fixture, one step or a longer jobSet per program; the site does not state an episode length for these rows
Object definitionWhether the old fixture, the new fixture, the wrench or the sealant counts as the objectContact events and the out-of-frame reject rule; set per program
Closing checkWhat counts as a passed test or a leak check, and whether it is labeledAccept criteria; no such label is stated by default
Capture modeHead-mounted phone, multiview angles, wrist views and any othersThe streams you can read; confirm on the Spec Pilot
Setting and privacyWhere capture happens and who may be in frameSettled before capture; bystander handling is a stated reject criterion
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
Delivery format and licenseHow the data is packaged and who owns itRLDS, LeRobot, WebDataset, HDF5, zarr, Rerun .rrd or raw streams; perpetual, buyer-owned, non-exclusive by default

Example footage

What does first-person capture look like?

One real clip already published on this site, shown as a format and rig example: ten seconds of first-person home cooking with faces blurred. It does not show plumbing or any fixture work.

egocentric_cooking_10s.mp4 · first-person view · faces blurred · 1080 × 1080 web preview · format example, not a plumbing clip

No plumbing fixture clip is published on the site, so this is the nearest first-person clip, labelled as a format example. Request a sample to see delivered files. See sample data outputs, request an egocentric data sample.

FAQ

Egocentric plumbing fixture installation data, answered.

What is egocentric plumbing fixture installation data?
Custom first-person video of a paid, consented contributor removing an old fixture and fitting a new tap, toilet or sink with wrenches and sealant or sealant tape, then testing or checking for leaks, captured to a written skill spec.
Which catalog rows cover it, and what is their status?
Two rows in Trade Service Calls: "Plumbing Fixture Installation" ("Remove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test.") and "Remove and install plumbing fixtures using pipe wrenches and sealant tape" ("Disconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks."). Both are rated Hard, list a head-mounted phone or multiview rig, and are Ready to deploy. This page claims no volume or hours.
What does Hard mean here?
Only the skill level the catalog lists in its Skill column, one of Easy, Medium or Hard. The site states no failure rate, tolerance or plumber skill claim for these rows.
How is this different from the plumbing and pipe fitting page and the water heater page?
The plumbing and pipe fitting page covers ten plumbing and pipe rows, and the water heater page covers a different row, Water Heater Replacement. This page is about the two fixture installation rows only, as first-person video.
Is there an off-the-shelf plumbing fixture dataset?
No. None of the site’s off-the-shelf dataset descriptions names plumbing. It is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Does the data include fit quality or leak-test labels?
No such label is listed. The episode carries action segments, hand pose, contact events, an objects list and per-frame instance masks. What counts as a passed test or leak check is defined in the spec as accept criteria.
How fast can a custom fixture installation dataset be collected?
From signed spec to first validated batch, a median of 48 hours where coverage is deep and three to four weeks where it is thin. Ask which applies when you request the quote.
Who owns the data and in which formats does it arrive?
The buyer owns the delivered data under a perpetual, non-exclusive commercial license by default. Formats are RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata.

Sources

Where are the delivery formats documented?

Request a custom plumbing fixture installation dataset.

Tell us where each attempt starts and ends, which fixtures are in scope, whether an episode covers one fixture or a longer job, the setting, the privacy rule for the space, and the streams and format you want. We will quote reach, timeline and price against a written spec.