Now recruiting capture teams worldwide. Get paid to record first-person video of real work.

Apply to capture

Hard task

Stereo Plumbing Fixture Installation Data

Removing the old fixture and fitting a new tap, toilet or sink with wrenches and sealant, then testing, is one row in the site’s task catalog, and a second row words the same job with pipe wrenches and sealant tape. Both are rated Hard and listed Ready to deploy. This page covers the stereo and container side: what a calibrated stereo pair adds to stereo plumbing fixture installation video, what a tap, toilet and sink fitting robot dataset needs from the capture, what MCAP is according to its own documentation, and what the site does not state. We run custom trade service data collection fast and on demand against a spec you write, delivered as MCAP, as custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Catalog rows
Plumbing Fixture Installation and the pipe wrench and sealant tape fixture row, in Trade Service Calls
Skill and status
Hard; Ready to deploy, as the catalog lists them
Container
MCAP (.mcap), open source
License
Perpetual, buyer-owned

Why stereo and MCAP here

What do a stereo pair and an MCAP file add to tap, toilet and sink fitting video?

01

Depth for a wrench, a fixture and two hands

The site states that a stereo pair at human-eye spacing makes depth recoverable from every frame pair, so the wrench, the old fixture, the new fixture and both hands sit in one frame. The site gives no depth accuracy figure for these rows and does not state how depth behaves near a tap, a toilet or a sink.

02

Fingers hidden behind the wrench or the fixture, flagged not guessed

The site states that fingers disappear behind objects and that the hands occlude the work. 3D hand pose carries a per-joint visibility flag, so a finger folded behind a pipe wrench or a fixture is marked as hidden rather than silently filled in.

03

Removal, fitting and the closing check as separate steps

Both rows start with taking the old fixture out, continue with fitting a new one and end with a check, a test or a leak check. Action segments carry start_ns, end_ns, verb and noun, so each step can be a labeled span. Which verbs and nouns are used is set in the skill spec.

04

Several streams in one container

MCAP stores multiple channels of timestamped, pre-serialized data, so a stereo pair, hand pose and IMU can share one file on one log-time axis. Which streams go in the file is set in the skill spec.

Definition

What is stereo plumbing fixture installation data?

It is first-person video of a person doing the work named in two catalog rows: removing or disconnecting an old fixture, fitting a new tap, toilet or sink with wrenches and sealant or sealant tape, and testing or checking for leaks. It is recorded with two calibrated cameras, with hand pose and sensor streams alongside. People reach it through several phrasings: stereo plumbing fixture installation video, tap, toilet and sink fitting robot data, a pipe wrench and sealant tape dataset, or custom trade service data collection at scale. They describe one request from different angles. Stereo describes the capture, and MCAP describes the container. They are separate choices.

The site does not state that stereo is already running on these rows. The catalog lists a head-mounted phone or a multiview rig as the capture setup, so a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The data is human capture by paid, consented contributors, not robot or teleoperation data, so using it for a specific robot still needs your own retargeting step. Firsthand is not affiliated with Foxglove or the MCAP maintainers.

Catalog rows

Which catalog rows does this page rely on, and what is their status?

Two, listed in lib/commercial-catalog-data.ts under the Trade Service Calls (Plumbing / HVAC / Electrical) environment in the Construction & Trades sector, whose examples line reads "Plumber, electrician or HVAC crew on service calls at client sites". The first is named "Plumbing Fixture Installation" and reads "Remove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test." The second is named "Remove and install plumbing fixtures using pipe wrenches and sealant tape" and reads "Disconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks." Both are rated Hard.

Both list the capture setup "Phone (head-mounted) / multiview rig" and are Ready to deploy. That is the status the catalog gives, and the catalog does not define its statuses further. This page claims no volume, hours or delivered stereo footage for either row. What the status means for your region and timeline is confirmed when you request the quote. The first table below reproduces both rows as the catalog states them.

Hard rows

What does "Hard" mean for these rows, and why is the task demanding?

On this site, Hard is the value in the catalog’s Skill column, one of Easy, Medium or Hard, and it is the only meaning this page uses. Both rows carry it. The hard-task hub lists every row rated Hard, grouped by environment, and these two rows are in it. In the same environment the drain snaking rows are rated Medium, while Water Heater Replacement is rated Hard like the fixture rows. The site publishes no rubric, scale or criteria behind the column, and this page imports none from elsewhere.

What the row text does show is what a capture has to hold. Wrenches or pipe wrenches are in the hands for the work, so the hands are the data. Sealant or sealant tape is applied, and a test or a leak check closes the job, so one episode can span several linked steps. The site states no failure rates, tolerances or skill levels for the people doing the work, and this page states none.

Two rows

How do the two fixture rows differ from each other?

They describe the same family of job in different words. The first names the fixtures, a tap, a toilet or a sink, and says "wrenches and sealant" and "test". The second names the tools and materials more exactly, "pipe wrenches" and "sealant tape", and says "check for leaks". Neither names a fixture brand, a tool model or a sealant product.

For a buyer, the two rows are one program with two ways to word the spec. A single order can cover both, with the spec stating which fixtures, which tools and which closing check each episode contains, and whether a stereo pair is part of the capture.

Difference

How is this different from the egocentric fixture page and the other plumbing pages?

This page is the stereo and MCAP treatment of the two fixture rows. The egocentric plumbing fixture installation page covers the same two rows as first-person capture, with the fixture job as its subject, and it remains the page the hard-task hub links for both rows, because those rows list a head-mounted phone or a multiview rig, not a stereo pair. This page is the stereo companion to it.

The stereo plumbing and pipe fitting page covers six plumbing and pipe rows in four environments, so the two fixture rows are two of six there. The stereo water heater replacement page covers a different row, Water Heater Replacement, which drains and disconnects a heater, positions the new unit and connects water and power. The stereo drain snaking and clearing page covers the drain rows, which are rated Medium. None has fixture installation as its main topic in stereo. The second table below sets the pages side by side.

Capture setup

What capture setup do the rows list, and where does stereo come in?

The catalog lists "Phone (head-mounted) / multiview rig" for both rows. The site does not state a stereo pair for them. Stereo applies through the site’s general stereo offer: a stereo pair is a capture choice agreed in the skill spec and confirmed on a Spec Pilot. The catalog does not say which of its two modes applies to a batch, so the setting is agreed in the spec. The site lists capture at your own facility as not offered.

The site describes two stereo setups and does not say which one an order for these rows uses. The off-the-shelf stereo head rig, dataset 06, is dual fisheye cameras at 1080p per eye, a 62 mm baseline, per-unit calibration, a 9-axis IMU and hand-tracking output. The hard-environments stack is a 4K/60 head camera with a 120° lens, two 1080p/60 wrist cameras, depth at 848×480 and 30 fps, and a 200 Hz 6-DoF IMU. Camera count, resolution and frame rate for fixture installation are Not stated, and so are the homes or sites that host the work.

Occlusion and depth

What do the hands, the wrench and the fixture do to visibility and depth?

In fixture work the hands sit between the camera and the job, and a fixture can vanish behind a finger, a closed hand around a wrench or the wrench itself. The site states that the hands occlude the work and that fingers disappear behind objects. That is why each hand joint carries a visibility flag, why contact events mark when the hand meets an item, and why instance masks are recorded per frame.

The site states that depth degrades on wet and reflective surfaces, that metric depth on sub-centimetre parts is flagged rather than interpolated, and that per-frame confidence maps mask low-confidence regions. Whether anything at a tap, a toilet or a sink counts as such a surface or part is Not stated. A Spec Pilot checks it on real footage rather than assuming it.

Hand pose and streams

What does a stereo fixture installation episode contain?

Each episode follows the Firsthand episode schema, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events and frame-accurate action segments. Hand pose is delivered as handJoints[2][21][3] in metric units in the head-camera frame, two hands of 21 joints each, with a visibility flag per joint. For these rows, hand pose tracks how the fingers hold the wrench and the fixture, contact events mark when a hand meets a wrench, a fixture or sealant, and action segments mark each step of the job. Action segments carry a verb and a noun from a taxonomy the site states as 97 verbs and 512 nouns, human-reviewed.

The only language data the site ties to Firsthand capture is one task instruction per episode. Object labels use the terms your spec sets. Force, torque and tactile readings are not among the listed streams, and neither is any label for whether a fixture is fitted acceptably or a connection leaks. If your model needs one of those, say so in the spec before capture, because the site does not promise it.

Steps

Which steps can a stereo spec label?

The rows give outcomes in one line, not a list of steps, so the steps come from the spec. A spec that says "replace the fixture" gives one long action segment. A spec that names each part you want separated, such as removing or disconnecting the old fixture, fitting the new one, applying sealant or sealant tape and testing, gives a sequence you can slice by step. The site sets no episode length for these rows, and this page gives no plumbing procedure.

What counts as a finished fit or a passed test is Not stated and is written into the spec as accept criteria before capture. Whether an episode covers one fixture, one step or a longer job is a spec decision, not a default.

Not stated

What does the site not state about stereo fixture installation?

Fixture types, fixture and tool brands or models, sealant products, pipe sizes, pressures, torques, flow rates, leak-test criteria, tolerances, cycle times, error rates, item counts and what a passed check means are Not stated. No plumber, client, home, brand or customer is named for the rows, and none is used here. They are set in the written spec, and this page claims none of them.

The site also states no trade licensing, code-compliance, safety or certification claim for these rows, so this page describes none and gives no plumbing instructions. Who performs the work and under what conditions is something to raise when you scope the order.

Privacy

How are people and spaces in frame handled?

Every contributor signs a written release, and each delivered episode links to it through consent artefact IDs in the batch data card. At ingest, automated detection finds faces, plates and screens and blurs them irreversibly. A reviewer confirms the result before anything ships, an undocumented bystander is a stated reject criterion, and footage that cannot be de-identified is discarded. The anonymization record ships with the data.

The site does not state how a household or the people in it are handled beyond that general rule, so who may be in frame is agreed in the spec before capture. This is not legal advice, and the executed agreement controls.

MCAP

What is MCAP, per its own documentation?

MCAP is an open source container file format for multimodal log data, supporting multiple channels of timestamped pre-serialized data. It is serialization-agnostic, so messages can be Protobuf, DDS (CDR), ROS, JSON and more. Its design is row-oriented and append-only, it stores schemas alongside the data, and it offers an optional index plus optional LZ4 or Zstandard chunk compression.

Reader and writer libraries exist for C++, Go, Python, Rust, Swift and TypeScript, and the mcap CLI can inspect, merge and split files. The foxglove/mcap repository is MIT-licensed; that is the MCAP project licence, not the licence of a Firsthand delivery. The MCAP hub page and the glossary entry cover the format in full.

Streams

Which streams can ship in an MCAP delivery of fixture installation data?

Firsthand offers MCAP delivery, and dataset 06 is stated as shipping as MCAP. For these rows the site states hand pose, a stereo-derived depth stream with confidence maps, IMU, contact events, action segments, per-frame instance masks and one task instruction per episode elsewhere. What it does not state is which of those are channels in an MCAP file, how they are named, what encoding they use or at what rate. The third table below maps each stream to what the site states.

No topic name, message schema or rate is stated on this page, and none should be assumed. Name the streams that matter in the skill spec and confirm them on a Spec Pilot batch.

Failure modes

What goes wrong when you record close two-handed fixture work in stereo, and what does QA reject?

Hand occlusion by the wrench and the fixture is the first risk, handled by the visibility flag above. Calibration is measured at the start and end of every session under a 0.28 px RMS gate, and an episode is rejected for a sync breach beyond the ceiling for more than three consecutive frames, for the manipulated object out of frame for more than 15 percent of the episode, for more than 35 percent invalid depth pixels in the manipulation region, for an undocumented bystander or for a mismatch against the named skill spec.

For these rows, what counts as the manipulated object, the old fixture, the new fixture, the wrench or the sealant, is a spec decision, and it decides how the out-of-frame rule applies. A reject log ships with every batch, and rejected items are recaptured at the provider’s cost. The fourth table below lists each failure mode with what the site states.

Scale

How do off-the-shelf coverage and custom collection combine for fixture installation?

The October 2026 off-the-shelf catalog lists ~324,800 hours across 18 datasets, of which stereo is ~64,800 hours across 9 datasets. The site names no plumbing dataset among them, so this work is custom collection, not an off-the-shelf purchase. The off-the-shelf stereo and hand-tracking video can still show the format before you write a spec.

It is custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. Where coverage is deep, the median time from signed spec to first validated batch is a median of 48 hours; where it is thin, turnaround runs three to four weeks. The site does not say which applies to these rows, so the timeline is quoted against your spec. Collections are billed per validated hour, and rejected episodes and recaptures are never billed.

Delivery

Which formats and license come with the data?

MCAP can ship alone or beside the format your stack already reads: RLDS, LeRobot, WebDataset, HDF5, zarr or Rerun .rrd, or raw streams with metadata, with readable converter source alongside so the schema can be retargeted to your own loader.

The license is perpetual, irrevocable and worldwide, with the data buyer-owned and non-exclusive by default. Training, evaluating, fine-tuning and deploying models, including commercial ones, is permitted, and exclusivity is available as a separate term. The executed agreement controls.

Ordering

How do you order a stereo plumbing fixture installation dataset?

Describe the task and where it starts and ends: removing an old fixture, fitting a new tap, toilet or sink with wrenches and sealant or sealant tape, and testing or checking for leaks. Say which fixtures are in scope, whether an episode covers one fixture or a longer job, what counts as the object and as a reject, the setting and lighting, and the privacy rule for the space.

Most programs begin with a Spec Pilot, a small first batch that proves the spec and accept criteria on real footage before you scale. The last table below shows what each spec element decides. For the full list of rows rated Hard, see the hard-task hub linked below.

At a glance

What you get.

Catalog row 1
"Plumbing Fixture Installation": "Remove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test." Trade Service Calls (Plumbing / HVAC / Electrical); Hard; Ready to deploy
Catalog row 2
"Remove and install plumbing fixtures using pipe wrenches and sealant tape": "Disconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks." Trade Service Calls; Hard; Ready to deploy
Catalog capture setup
Phone (head-mounted) / multiview rig on both rows. The site states no stereo pair for these rows, so a stereo pair is agreed in the skill spec through the general stereo offer
Stereo head rig (06)
Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAP
Hand pose
21 joints per hand with a per-joint visibility flag
Sync
Hardware-triggered onto one clock; 2.0 ms cross-stream ceiling
Fixture types, tool and sealant products, pipe sizes, pressures, leak criteria
Not stated; agreed in the skill spec
MCAP topics, schemas, rates
Not stated on the site; agreed in the skill spec
License
Perpetual, irrevocable, buyer-owned, non-exclusive by default

Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.

Catalog rows

Which catalog rows cover plumbing fixture installation, and what is their status?

The two rows relied on by this page, reproduced as the catalog states them. Neither row states a stereo pair.
Task (as listed)Description (as listed)EnvironmentSkillCapture setupStatus
Plumbing Fixture InstallationRemove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test.Trade Service Calls (Plumbing / HVAC / Electrical)HardPhone (head-mounted) / multiview rigReady to deploy
Remove and install plumbing fixtures using pipe wrenches and sealant tapeDisconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks.Trade Service Calls (Plumbing / HVAC / Electrical)HardPhone (head-mounted) / multiview rigReady to deploy

Comparison

How does this page compare with the neighbouring plumbing pages?

The existing pages closest to this topic, set against this page by capture framing, rows covered and row status as the site lists it.
PageCaptureWhat it coversRow status as listedRelation to this page
This page: stereo plumbing fixture installation dataStereo pair through the general offer; MCAP deliveryTwo rows: the fixture installation rowsReady to deploy (both Hard)Fixture installation as the main topic, in stereo
Egocentric plumbing fixture installation dataEgocentric, not stereo as its subjectThe same two rowsReady to deploy (both Hard)The same rows as first-person capture; the page the hard-task hub links for both rows
Stereo plumbing and pipe fitting dataStereo, agreed in the spec; MCAP focusSix plumbing and pipe rows in four environmentsAs listed per rowThe whole family in stereo; the fixture rows are two of six there
Stereo water heater replacement dataStereo, agreed in the spec; MCAP focusOne row: Water Heater ReplacementReady to deploy (Hard)A different task in the same environment
Stereo drain snaking and clearing dataStereo, agreed in the spec; MCAP focusThe drain rowsReady to deploy (Medium)A different task in the same environment
Egocentric stereo data in MCAPThe stereo and MCAP hub across tasksNot applicableNot applicableGeneral stereo and MCAP treatment; not specific to plumbing

Stream map

Streams for fixture installation data and what the site states about an MCAP file

Left to right: the stream or item, what the site states about it, and what the site states about it in MCAP. “Not stated” means the site does not say.
Stream or itemWhat the site statesIn an MCAP delivery, as the site states it
Stereo pairDual fisheye, 1080p per eye, 62 mm baseline (dataset 06)Dataset 06 is stated as shipped as MCAP; channel layout not stated
Depth with confidence mapsRecovered from the calibrated stereo pair; confidence map masks low-confidence regionsNot stated
Hand pose21 joints per hand with a per-joint visibility flagChannel layout and joint order not stated
IMU9-axis (dataset 06); 6-DoF at 200 Hz (hard-environments stack)Channel layout and rate not stated
Contact events, action segments, instance masksListed in the site episode schema; masks stored at 848×480Not stated
Task instructionOne per episodeNot stated
CalibrationMeasured every session and shipped with the episodePlacement in the file not stated
Topic names, schemas, encoding, ratesNot statedAgreed in the skill spec

Failure modes and QA

What goes wrong in fixture installation capture, and what QA does about it

Left to right: the failure mode, what the site states, and what a buyer sees. “Not stated” means the site does not say.
Failure modeWhat the site statesWhat a buyer sees
Fingers hidden behind a wrench or a fixturePer-joint visibility flag on hand pose; wrist views and a multiview angle available in the specA hidden joint flagged as hidden, not guessed
Fixture or wrench out of framePer-frame instance masks; episode rejected when the object is out of frame for more than 15 percent of itReject log per batch; what the object is gets set in the spec
Small partsMetric depth on sub-centimetre parts is flagged rather than interpolatedWhether a fitting or a seal counts: Not stated; test on a Spec Pilot
Wet or reflective surfacesDepth degrades on wet and reflective surfaces; confidence maps mask low-confidence regionsBehaviour at a tap, toilet or sink: Not stated; test on a Spec Pilot
Invalid depth in the manipulation regionEpisode rejected when more than 35 percent of depth pixels are invalidReject log per batch; confidence maps ship with depth
Bystander in frameFaces, plates and screens blurred and reviewer-confirmed; undocumented bystander rejected; footage that cannot be de-identified is discardedReject log per batch; anonymization record ships with the data
Calibration driftSolved at the start and end of every session; 0.28 px RMS gateCalibration shipped with the episode
Sync breachRejected beyond the 2.0 ms ceiling for more than three consecutive framesReject log per batch
Spec mismatchRejected for a mismatch against the named skill specReject log per batch

Stated vs not stated

What the site states about stereo capture for fixture installation

Left to right: the item, what the site states, and what that means for a fixture installation order. “Not stated” means the site does not say.
ItemWhat the site statesFor a fixture installation order
Catalog capture setupPhone (head-mounted) / multiview rig on both rowsNo stereo pair is stated for these rows; a stereo pair is a spec choice through the general stereo offer
Stereo head rig (dataset 06)Dual fisheye, 1080p per eye, 62 mm baseline, per-unit calibration, 9-axis IMU, hand-tracking output; shipped as MCAPWhether an order uses it: Not stated
Hard-environments stack4K/60 head camera, 120° lens; two 1080p/60 wrist cameras; depth 848×480 at 30 fps; 200 Hz 6-DoF IMUWhether an order uses it: Not stated
Row statusBoth rows are Ready to deployNo volume, hours or delivered stereo footage is claimed on this page
SkillHard, as the catalog’s Skill columnNo rubric, failure rate or worker skill level is stated or claimed
Calibration and synchronizationMeasured every session, 0.28 px RMS gate; hardware-triggered, 2.0 ms cross-stream ceilingStated
Fixture types, tool and sealant products, pipe sizes, pressuresNot statedNot claimed; set in the spec
Fit quality and leak-test labels, force and torqueNot statedNot claimed; completion is defined in the spec
Task time, error rateNot statedNot claimed on this page
MCAP topics, schemas, ratesNot statedAgreed in the skill spec

Skill spec

What the skill spec fixes for a stereo fixture installation order

Spec element and where a buyer can see it in the delivery. “Set per program” means the site states no fixed value.
Spec elementWhat it decidesWhere it shows up
RowsOne or both fixture rows, worded as the catalog words themSet per program; both Ready to deploy
Fixtures in scopeWhether a tap, a toilet, a sink or a mix is in scopeWhat the cameras see; set per program
Steps and orderWhat one step is, such as removal, fitting, sealing and testingEpisode boundaries and action segments; set per program
Episode scopeOne fixture, one step or a longer jobSet per program; the site does not state an episode length
Object definitionWhether the old fixture, the new fixture, the wrench or the sealant counts as the objectContact events and the out-of-frame reject rule; set per program
Closing checkWhat counts as a passed test or a leak check, and whether it is labeledAccept criteria; no such label is stated by default
Rig and streamsStereo pair, multiview angles, wrist views, hand pose, IMU and any othersThe channels you can read; confirm on the Spec Pilot
MCAP topics and encodingWhat your reader expectsSet per program
Delivery formatHow the data is packagedMCAP alone, or beside RLDS, LeRobot, WebDataset, HDF5 or zarr
Accept criteriaWhat passes QA, including what counts as a rejectReject log per batch
PrivacyHow people, screens and signage in frame are handledFaces, plates and screens blurred at ingest; other items agreed in the spec
LicenseWho owns the datasetPerpetual, irrevocable, buyer-owned, non-exclusive by default

Example footage

What does egocentric stereo capture look like?

One real clip already published on this site, shown as a format and rig example: a head-mounted stereo capture with hands in frame. It does not show plumbing or any fixture work.

egocentric_stereo_sample.mp4 · head-mounted stereo · hands in frame · 1920 × 1080 web preview · rig example, not a plumbing clip

No plumbing fixture clip is published on the site, so this is the nearest stereo clip, labelled as a format and rig example. Request a sample to see delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.

FAQ

Stereo plumbing fixture installation data, answered.

What is stereo plumbing fixture installation data?
First-person video from two calibrated cameras of a person removing an old fixture and fitting a new tap, toilet or sink with wrenches and sealant or sealant tape, then testing or checking for leaks, with depth and hand pose alongside.
Which catalog rows cover it, and what is their status?
Two rows in Trade Service Calls: "Plumbing Fixture Installation" ("Remove the old fixture, fit the new tap, toilet or sink with wrenches and sealant and test.") and "Remove and install plumbing fixtures using pipe wrenches and sealant tape" ("Disconnect old fixtures with pipe wrenches, fit new ones with sealant tape and check for leaks."). Both are rated Hard, list a head-mounted phone or multiview rig, and are Ready to deploy. This page claims no volume or hours.
Is stereo already captured on these rows?
Not stated. The catalog lists a head-mounted phone or multiview rig and no stereo pair. A stereo pair is agreed in the skill spec through the general stereo offer and confirmed on a Spec Pilot.
How is this different from the egocentric fixture page and the plumbing and pipe fitting page?
The egocentric page covers the same two rows as first-person capture and is the page the hard-task hub links for them. This page is stereo capture of those rows with MCAP delivery. The stereo plumbing and pipe fitting page covers six rows in four environments, and the two fixture rows are two of them.
Is there an off-the-shelf plumbing dataset?
No listed dataset names plumbing. Stereo plumbing fixture installation data is custom collection, at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs.
Does the data include fixture brands, pipe sizes, pressures or leak-test results?
Not stated. The site names fixtures, wrenches, pipe wrenches, sealant and sealant tape in the rows and lists no fixture types, brands, pipe sizes, pressures, torques or leak-test labels, so none is claimed. What counts as a passed test is defined in the spec as accept criteria.
Can it be delivered as MCAP, and what is in the file?
Yes. Firsthand offers MCAP delivery. Topic names, message schemas and rates are Not stated on the site and are agreed in the skill spec.
Is the footage anonymized and consented, and who owns it?
Every contributor signs a written release, and each episode links to it by consent artefact ID. Faces, plates and screens are blurred irreversibly, and footage that cannot be de-identified is discarded. The license is perpetual, irrevocable and buyer-owned.

Sources

Where are the delivery formats documented?

Request a custom stereo plumbing fixture installation dataset delivered as MCAP.

Tell us the task and where it starts and ends, which fixtures are in scope, whether an episode covers one fixture or a longer job, the setting and lighting, the privacy rule for the space, the streams you want in the file and whether MCAP sits beside RLDS, LeRobot or WebDataset. We will quote reach, timeline and price against a written spec, with a first validated batch proven on a Spec Pilot.