Two named jobs, written as separate tasks
Reloading a stapler and tape dispenser and printing and applying labels are different hand sequences with different start and end states, so a spec names each one.
Now recruiting capture teams worldwide. Get paid to record first-person video of real work.
Apply to captureTask family
Requirements
Reloading a stapler and tape dispenser and printing and applying labels are different hand sequences with different start and end states, so a spec names each one.
Both catalog rows are recorded with a multiview rig and handheld grippers, a staged working set, so the demonstrations map onto a robot end effector.
The site pairs hand-object work with 3D hand pose with per-joint visibility, depth and contact and grasp events, and the streams an order carries are set in the spec.
Sheets, forms, badges and mail that would leak names, addresses or account data are detected and irreversibly blurred, then confirmed by a human reviewer.
A perpetual, buyer-owned commercial license backed by a documented consent chain.
Definition
Egocentric stapler refill and label making data is real-world video of a person working with a stapler, a tape dispenser and a label maker. The footage shows the hands, the device being opened or loaded, and the label being printed and applied to an item. Alongside the video, each episode follows the Firsthand episode schema, with depth, 3D hand pose, contact events and frame-accurate action segments aligned on one hardware clock.
Teams search for it under several names, including egocentric office supply refill data, first-person label maker video and a handheld gripper stapler reloading dataset. They all describe demonstrations of the same office jobs, collected to a written spec. This page covers only what the Firsthand site states about it, and marks everything else as Not stated.
Tasks
Two rows in the site task catalog cover this work, both in the Office Document Station environment. The first is "Refill stapler + tape", described as "Reload a stapler and tape dispenser." and rated Medium. The second is "Label-maker + apply", described as "Print and apply labels to items." and rated Easy. Both use a multiview rig with handheld grippers, and both are listed as Available on request.
Anything outside those two rows is Not stated. That includes any named type of stapler, tape or label, any label content, and any step beyond what the descriptions say, so none is claimed here. If your policy needs one of them, you write it into the spec and we scope it, because the catalog rows are a starting vocabulary, not a fixed menu.
Status
The site defines Available on request as work that is scoped and recruited to spec when a buyer asks for it. Neither row is listed as Active collection or Ready to deploy, so the site does not say that a stapler or label-maker capture stream is running today, and this page does not imply that any data has been delivered. A first batch is therefore quoted against your spec rather than drawn from a stream that already exists.
Environment
The site describes the Office Document Station as a desk-and-document station with a printer and tray, binders, a stapler, a label maker and mailers. Its rows use the multiview rig with handheld grippers, which the site describes as a staged working set recorded by a multiview rig while the operator performs the task with handheld grippers, so demonstrations map onto a robot end effector.
The site names no office, company or building, and does not state the number of sites, the regions or the venue type. It does not state capture at a customer own facility either. Environment, access and schedule are agreed in the written spec.
Capture setup
The catalog states the capture mode for both rows: a multiview rig with handheld grippers. That is not the head-mounted phone capture the site lists for some other rows, and the catalog does not call these two rows stereo capture. Stereo applies to them only through the general Firsthand stereo offer, so if you need a stereo rig on this task, say so in the spec and it is scoped there.
The site does not state a per-environment stream list, so which of the ten streams an order carries is decided in the skill spec. Camera count, resolution, frame rate, desk layout and the type of stapler, tape dispenser or label maker are Not stated, so raise any of them in the spec.
Episode contents
Each episode follows the Firsthand episode schema: ten streams synced under 2 ms, with head and wrist RGB, depth, 3D hand pose with per-joint visibility, contact and grasp events, and frame-accurate action segments. Action segments separate the jobs inside a session, so reloading the stapler, reloading the tape dispenser, printing a label and applying it can each be marked on the same clock.
Object labels use the terms your spec sets. Staple, tape and label types, label text and sizes, and equipment makes are Not stated. Task durations, cycle times and the number of episodes are Not stated too. Success or quality labels, such as whether a stapler is fully loaded or a label is straight, are Not stated, as are certifications and robot results. The site makes no safety-compliance claim for this work.
Why it is hard
The catalog rates "Refill stapler + tape" Medium and "Label-maker + apply" Easy. The site does not say what makes the Medium row harder, and it states no success rates or robot results for either row, so this page makes none. What the site does say is general: a robot or humanoid perceives from a head- or wrist-mounted camera, not a static overhead shot, and egocentric capture matches that geometry.
The site also pairs hand-object work with 3D hand pose with per-joint visibility, depth and contact and grasp events, which is how a spec can ask for the moments a hand opens, loads or presses something to be marked. Which of those events matter on these two rows is a spec decision.
Scoping
A good spec treats each named job as its own task. Reloading a stapler and tape dispenser and printing and applying labels each get a start state, an end state and a set of accept criteria. Because the first row names two devices, a spec can also decide whether the stapler and the tape dispenser are one task or two, and whether a clean run is enough. That keeps action segments consistent across contributors and lets you ask for more of one job without re-collecting the other.
Delivery
Delivery formats are RLDS, LeRobot and WebDataset, plus HDF5, zarr and Rerun .rrd. These episodes use the same schema as every other Firsthand collection, so a loader that reads another Firsthand dataset reads this one without changes. The format table below sets each format against what its official documentation states.
Every batch is validated against signed accept criteria before it ships, with a reject log, and delivery is rolling, per validated batch. Rejected items are recaptured at our cost, and billing is per validated hour.
Privacy
Every episode links to a signed contributor release through a documented consent chain, and the consent record is part of the delivery. A vision model runs on every frame at ingest, flagging faces, heads, licence plates and any legible screen or document. The site describes the documents class as phone and monitor content, forms, badges and mail that would leak names, addresses or account data. Those regions are irreversibly blurred, and a human reviewer confirms the result before footage ships.
If the reviewer is unsure a region is fully covered, the episode is held or discarded, never downgraded and shipped. Whether printed labels count as that documents class, and whether any engagement can keep specific content, is Not stated, so raise any content need before the spec is signed. The site states no other privacy, compliance or legal terms for this work, and no in-home capture.
Fast · on demand
Where coverage is already deep, the first validated batch lands in a median of 48 hours from signed spec. Thin environments typically take three to four weeks, because vetting operators there is the bottleneck, and we quote that up front. The site does not state how deep coverage is for these two rows, and they are Available on request, so plan on a quote rather than assuming the 48 hour figure.
The site also states program milestones. A pilot reaches its first delivery in two to three weeks, and a standing program reaches full rate in four to six weeks. Those assume capture coverage is already in place. On-demand top-ups run against the same spec and accept criteria after each training run. A batch size and a later-batch turnaround are Not stated, so both are quoted against your spec.
Scale
Firsthand offers custom collection at scale through a network of thousands of capture providers, for a consistent, recurring data flow to labs. For these two rows, the site states no provider count, hours, throughput or cadence, and they are Available on request, so scale is quoted against your spec like any other part of the order.
The spec
You describe the stapler, tape dispenser and label-making jobs, the environment and the sequence your policy needs. We turn that into a written spec covering tasks, environments, capture tier, annotation depth and accept criteria, then quote reach, timeline and price before any capture begins. This is the custom data collection route that every Firsthand task family follows.
A Spec Pilot, a small and fast first batch, can prove the spec and accept criteria before you scale. Every collection ships under a perpetual, buyer-owned commercial license, with a reject log and signed accept criteria on every batch.
At a glance
Every collection runs through the same seven-stage end-to-end custom collection pipeline. End-to-end custom data collection is a managed service that takes an AI data need from problem to owned dataset in a single accountable pipeline.
What the site states
| Where it appears | What the site states | Used on this page as |
|---|---|---|
| Task catalog, Office Document Station | A "Refill stapler + tape" row rated Medium and a "Label-maker + apply" row rated Easy, both recorded with a multiview rig and handheld grippers, Available on request | The two stated tasks |
| Environment description | A desk-and-document station with a printer and tray, binders, a stapler, a label maker and mailers | The stated setting |
| Capture mode definitions | A multiview rig records a staged working set while the operator uses handheld grippers, so demonstrations map onto a robot end effector | How both rows are recorded |
| Barcode scanning and labeling page | Lists the "Label-maker + apply" row among scanning, printing, applying and tagging rows | Where label making sits in the wider labeling work |
Task rows
| Environment | Catalog task and description | Skill | Capture | Status |
|---|---|---|---|---|
| Office Document Station | Refill stapler + tape: reload a stapler and tape dispenser | Medium | Multiview rig and handheld grippers | Available on request |
| Office Document Station | Label-maker + apply: print and apply labels to items | Easy | Multiview rig and handheld grippers | Available on request |
Neighboring rows
| Catalog task and description | Skill | Where it is covered |
|---|---|---|
| Hole-punch + bind: punch sheets and load into binder rings | Easy | Not part of this page |
| Load tray + clear jam: load a paper tray and clear a jam | Easy | Egocentric office printer and shredder data |
| Shred documents: feed sheets into a shredder | Easy | Egocentric office printer and shredder data |
| Pack + tape mailer: pack a mailer and tape it shut | Easy | Egocentric envelope stuffing and mailer packing data |
Compare
| Page | What it covers on this site | How this page differs |
|---|---|---|
| Egocentric office printer and shredder data | The "Load tray + clear jam" and "Shred documents" rows | This page is dedicated to the stapler and tape refill and label-maker rows |
| Egocentric barcode scanning and labeling video data | Scan, print, apply and tag tasks as the catalog lists them, across several environments | This page narrows to the Office Document Station label-maker row and adds the stapler and tape refill row |
| Egocentric video data of office and desk tasks | The whole office sector: desk work, filing, scanning, printing, mail handling and twelve document station tasks | This page narrows to two of those document station tasks |
| Egocentric mailroom and document handling data | Mail handling, filing, scanning, printing and document station rows | Mail and document handling, not reloading a stapler or printing labels |
Streams and labels
| Item | Status on this site | Why it matters for stapler and label work |
|---|---|---|
| Head and wrist RGB, depth | Stated; ten streams synced under 2 ms | Keeps the device, the item and both hands on one timeline |
| 3D hand pose, per-joint visibility | Stated | Flags a hidden finger when the hand is at the device |
| Contact and grasp events | Stated | Marks when a hand meets or releases an object |
| Action segments | Stated; frame-accurate | Separates reloading, printing and applying inside a session |
| Staple, tape and label types, label text and sizes, equipment makes | Not stated | Defined in the spec |
| Task durations, cycle times, throughput, number of sites or episodes | Not stated | Defined in the spec |
| Force or tactile data | Not in standard capture; a separate pilot-ready glove tier exists, and its use on these rows is Not stated | Added through the glove tier if needed |
| Readable names, addresses or document content | Not in delivered video; blurred at ingest and confirmed by human review | Raise any content need before the spec is signed |
| Success or quality labels, certifications, robot results | Not stated | Defined in the spec if needed |
Formats
| Format | What the official documentation states | Used for here |
|---|---|---|
| RLDS | An ecosystem of tools to store, retrieve and manipulate episodic data; a dataset is retrieved as episodes, and each episode holds a dataset of steps (RLDS repository README) | Episode-based training loaders |
| LeRobot | LeRobotDataset v3.0 is a standardized format for robot learning data, including multi-camera video, with many episodes stored per Parquet or MP4 file (LeRobot documentation) | LeRobot dataset format and tooling |
| WebDataset | Tar files in which files that belong together share a basename, with shards numbered in sequence (WebDataset README) | Sharded streaming for large training runs |
| HDF5 and zarr | Stated by Firsthand only | Array storage for custom pipelines |
| Rerun .rrd | Stated by Firsthand only | Multi-stream synchronized playback for review |
Example footage
One real clip already published on this site. It is a format and rig example: a head-mounted stereo capture with hands in frame. It does not show a stapler, a tape dispenser or a label maker, and it is not an example of the multiview rig with handheld grippers these rows use.
No clip of a stapler or label-maker task is published on the site, so this is the nearest first-person clip. Request a sample to see the delivered files. See stereo sample page, stereo + wrist-cam example videos, request an egocentric data sample.
FAQ
Sources
Tell us the stapler, tape dispenser and label-making jobs and sequence your policy needs to handle. We will quote reach, timeline, and price against a written spec, scoped and recruited to that spec.